Mechanical Components

Cryogenic Mixing Pump with No Moving Parts

The pump is self-priming and can efficiently pump two-phase fluid. John H. Glenn Research Center, Cleveland, Ohio Refueling spacecraft in space offers tremendous benefits for increased payload capacity and reduced launch cost, but the problem of thermal stratification in long-term storage tanks presents a key challenge. To meet this challenge, a reliable, compact, lightweight, and efficient cryogenic mixing pump was developed with no moving parts. The pump uses an innovative thermodynamic process to generate fluid jets to promote fluid mixing. This thermodynamic process eliminates moving parts to generate pumping action. Inherent to its design, the pump is self-priming and can efficiently pump two-phase fluid. The device will significantly enhance the reliability of pressure control systems for storage tanks.

Posted in: Mechanics, Mechanical Components, Briefs, TSP

Read More >>

Seal Design Feature for Redundancy Verification

The technology may be of interest to designers of high-altitude aircraft and submarine vessels. Lyndon B. Johnson Space Center, Houston, Texas NASA has requirements for redundant seals to protect human-occupied cabin atmospheres, as well as fluid and gas systems in space vehicles exposed to the harsh environments. Comparable requirements have been passed down to the International Space Station (ISS) Program, and are now levied on the Orion Multi-Purpose Crew Vehicle (MPCV).

Posted in: Mechanics, Mechanical Components, Briefs

Read More >>

Dexterous Humanoid Robot

This robot can replace human workers in dangerous, life-threatening conditions. Lyndon B. Johnson Space Center, Houston, Texas A humanoid robot has been created that includes a torso, a pair of arms, a neck, and a head. The torso extends along a primary axis and presents a pair of shoulders. The pair of arms movably extends from the shoulders. Each of the arms is fully jointed. The neck movably extends from the torso along the primary axis, and has at least one neck joint. The head movably extends from the neck along the primary axis. The head has at least one head joint. The shoulders are canted toward one another at a shrug angle that is defined between each of the shoulders such that a workspace is defined between the shoulders.

Posted in: Mechanics, Mechanical Components, Briefs

Read More >>

Tethered Vehicle Control and Tracking System

Kite-like wind energy generation systems can power a generator on the ground. Langley Research Center, Hampton, Virginia This innovation can control the flight of a tethered vehicle, in an airborne wind energy (AWE) generation system, through the use of a pan-tilt platform and a visible spectrum digital camera, combined with tracking and control software running on a standard PC.

Posted in: Mechanics, Mechanical Components, Briefs, TSP

Read More >>

Motion-Sensing Keyboard Lets Users Hover and Swipe

Microsoft engineers have developed a new type of augmented mechanical keyboard, sensing rich and expressive motion gestures performed both on and directly above the device. A low-resolution matrix of infrared (IR) proximity sensors is interspersed with the keys of a regular mechanical keyboard. This results in coarse, but high frame-rate motion data.

Posted in: Electronics & Computers, PCs/Portable Computers, Mechanical Components, Sensors, Software, Mathematical/Scientific Software, News

Read More >>

Pneumatic Sample Acquisition and Transfer System

This system can be used to collect samples from such hazardous areas as nuclear, extremely hot, and toxic environments. NASA’s Jet Propulsion Laboratory, Pasadena, California Sampling, sample handling, and sample transfer to lander platforms of in situ exploration missions involve great technical challenges. These challenges are even harder to address when the planetary bodies have extreme environments. For example, Venus has an ambient temperature of around 460 °C, and atmospheric pressure that is over 90 times the atmosphere of Earth.

Posted in: Mechanics, Mechanical Components, Briefs, TSP

Read More >>

Brine Residual in Containment

This system can be used in water recovery from industrial waste streams that may contain toxic compounds. Lyndon B. Johnson Space Center, Houston, Texas Improvements in brine water recovery are critical to advancing NASA’s goals for human exploration of space. Water recovery systems must minimize the need for new supplies of clean water by closing the water loop. To accomplish this, water losses must be minimized or eliminated. A major loss of water is the brine produced by the primary water processor. For current technologies, this loss can be up to 15%.

Posted in: Mechanics, Mechanical Components, Briefs

Read More >>

White Papers

Selecting Miniature Motors for your Medical Devices
Sponsored by Portescap
Avoid the High Cost of Quality Failure
Sponsored by Arena Solutions
Antenna Basics
Sponsored by Rohde and Schwarz
StarVX - A Generic Scalable Computer Architecture
Sponsored by Kontron
Bridging the Armament Test Gap
Sponsored by Marvin Test Solutions
Thinking Outside of the Box: Optimizing System Design With Embedded Expertise
Sponsored by Curtiss Wright

White Papers Sponsored By: