Motion Control

Micropulse Detonation Rocket Engine for Nano-Satellite Propulsion

Goddard Space Flight Center, Greenbelt, Maryland An efficient propulsion system would use a micropulse detonation rocket engine (–PDRE) for nano-satellite maneuverability in space. Technical objectives are to design, build, and conduct a small detonation tube experiment in order to explore the feasibility of using –PDRE for propelling a nano-satellite. The plan is to study the requirement and predict the performance of –PDRE using various candidate propellants, as well as to conduct ground experiments, demonstrate useful thrust, and measure the specific impulse in a two-year time frame, so that a follow-on project can be proposed in a future NRI Center Innovation Fund.

Posted in: Briefs, TSP

Read More >>

Propellant Loading Visualization Software

Monitoring of complex propulsion pressure systems has been simplified with colors. Goddard Space Flight Center, Greenbelt, Maryland Complex pressure systems are utilized during testing in the propulsion branch as well as during the propellant loading stage of a mission. Keeping track of the state of such a system becomes more difficult as the complexity of such a system increases, and when extensive procedures are being followed. A book-keeping system is needed for visualizing these complex systems.

Posted in: Briefs, TSP

Read More >>

Robust Gimbal System for Small-Payload Manipulation

This is a low-mass, small-volume gimbal unit. NASA’s Jet Propulsion Laboratory, Pasadena, California Spaceborne gimbal systems are typically bulky with large footprints. Such a gimbal system may consist of a forked elevation stage rotating on top of the azimuth motor, and occupy a large volume. Mounting flexibility of such a system may be limited.

Posted in: Articles, Briefs, TSP, Motors & Drives

Read More >>

Enabling Microliquid Chromatography by Microbead Packing of Microchannels

The microbead packing is the critical element required in the success of onchip microfabrication of critical microfluidic components for in-situ analysis and detection of chiral amino acids. In order for microliquid chromatography to occur, there must be a stationary phase medium within the microchannel that interacts with the analytes present within flowing fluid. The stationary phase media are the microbeads packed by the process discussed in this work. The purpose of the microliquid chromatography is to provide a lightweight, low-volume, and lowpower element to separate amino acids and their chiral partners efficiently to understand better the origin of life.

Posted in: Imaging & Diagnostics, Materials / Adhesives / Coatings, Monitoring & Testing, Optics/Photonics, Bio-Medical, Briefs, TSP, Briefs, TSP, Diagnostics, Fluid Handling, Measuring Instruments

Read More >>

Computer-Assisted Laser Treatment Using Real-Time Retinal Tracking

This computerized system accurately guides laser shots to diseased retinal areas. Diabetic retinopathy resulting from long-term diabetes mellitus is one of the common diseases that leads to choroidal neovascularization (CNV), a leading cause of blindness. Among the currently available treatment methods, a laser can be used to photocoagulate the diseased areas. Several thousand laser shots are usually required during such treatment. Special care must be taken to avoid hitting the blood vessel tree, the macula, the optic disk, and the region among them. For a single eye, this procedure requires up to several hours that are usually divided over many treatment sessions. Consequently, the development of an accurate laser treatment guidance system to treat the whole retina in one session would improve the effectiveness of such procedures.

Posted in: Bio-Medical, Briefs, TSP, Briefs, TSP, Lasers & Laser Systems, Photonics

Read More >>

White Papers

Achieving Better Adhesion with Proper Surface Preparation
Sponsored by master bond
Force and Torque Measurement Traceability
Sponsored by Morehouse
Synthetic Sapphire: Extreme Performer
Sponsored by Goodfellow
Finding the Right Manufacturer for Your Design
Sponsored by Sunstone Circuits
Troubleshooting EMI in Embedded Designs
Sponsored by Rohde and Schwarz A and D
Simulation of Coupled Electromagnetic/Thermal Systems using CAE Software
Sponsored by IES

White Papers Sponsored By: