Motion Control

Three-Phase Power Conversion in a Single Step

Marotta Controls is revolutionizing power conversion with 1-STEP, a patent-pending circuit solution that uniquely achieves three-phase active power factor correction, power regulation and electrical isolation in a single conversion step.

Posted in: White Papers, Defense, Electronics & Computers, Motion Control

Read More >>

How To Substantially Reduce Encoder Cost While Gaining Functionality With Multi-Turn Rotary Position Sensors

Many applications require rotation counters that can measure angles greater than 360º. However the low-cost 10-turn potentiometers most design engineers are familiar with can’t always meet user requirements for resolution and reliability. As an alternative, optical absolute encoders are too expensive for many applications. These solutions require a continuous power supply or they will lose count when power is restored. Also, geared technology/rotation counters are subject to significant wear.

Posted in: White Papers, Motion Control, Machinery & Automation, Robotics, Data Acquisition, Sensors

Read More >>

Pedal Position Sensing in Heavy-Duty Vehicles

Pedal position detection is nothing new when it comes to operation of heavy duty equipment. However, the age old system operation of mechanical linkages between the pedal and the engine just might be coming to an end. New sensor technology is now enabling non-contact, drive-by-wire that can reduce total system cost while standing up to the harsh environments of off highway equipment.

Posted in: White Papers, Mechanical Components, Fluid Handling, Motion Control, Data Acquisition, Sensors

Read More >>

Linear Motor

The LinX® linear motor from Anca Motion USA (Wixom, MI) delivers a continuous force from 333 N to 665 N, and peak force from 2136 N to 4272 N. It features a cylindrical design with a thermal barrier that helps separate and remove heat from the motor. The motor’s zero net attractive forces eliminate the downforce associated with flatbed motors. Its cylindrical profile makes the system compact, effectively fitting into a space similar to that required by a regular ball-screw and circular motor. The motors are fully sealed and rated to IP67 or optional IP69K, making them well suited for machine tool and food processing systems. The motor can be enabled with an algorithm that increases axis stiffness and helps to minimize axis deflection with greater accuracy.

Posted in: Products, Motors & Drives

Read More >>

Optical Encoders

MICROMO (Clearwater, FL) announced the FAULHABER high-precision IER3 and IERS3 optical encoders. Both encoders deliver two-channel quadrature signals and an additional index signal. They can position a FAULHABER micro DC motor or brushless DC servomotor with a typical accuracy of 0.1° to 0.3°. The encoders combine the LED, photodetectors, analysis unit, and interpolation levels on one chip. They lengthen motors by 15.5 to 18.5 mm. Both encoders are also available with line drivers that generate complementary output signals and make data transmission resistant to electrical interference, especially in encoders with long connecting cables. The IER3 encoder has a resolution of up to 10,000 lines per revolution, and achieves an angular resolution of 0.009° with the evaluation of 40,000 edges per revolution. The IERS3-500 provides resolutions of 250 and 500 lines per revolution.

Posted in: Products, Electronics & Computers, Motors & Drives, Optical Components, Optics

Read More >>

Improve Encoder Performance With EtherNet/IP

As industrial automation networks go, EtherNet/IP has more than its share of advantages. It’s fast. It’s flexible. It’s easy to set up. It’s robust. Those advantages, however, come at a price. Users have to invest in infrastructure and devices certified to work with the EtherNet/IP standard.Today, EtherNet/IP is among the most popular industrial networks, and there’s no shortage of compliant devices. Consider motion control applications, for example. There are hundreds of EtherNet/IP actuators, drives, controllers and sensors on the market today.

Posted in: White Papers, Electronics & Computers, Electronics & Computers, Motion Control, Motors & Drives

Read More >>

Electro-Hydraulic Motion Controller

Delta Computer Systems (Battle Ground, WA) has announced the RMC200 closed-loop electro-hydraulic motion controller that has the capacity to handle closed-loop control of up to 32 motion axes. The controller can synchronize the motion of multiple axes, enabling the construction of machines with scalable performance and quick production changeovers. It provides built-in support for controlling pressure/ force as well as position/velocity/acceleration. Through use of a programmable feature key, the controller will enable only the number of control loops that a customer’s application needs. Other features include a display screen on the CPU, I/O modules with push-in wire connectors, and fully encased, user-installable modules that “rock-in” to provide power-sequencing capability. The unit’s modular expandability enables it to support expanded control and I/O interfacing compatibility as new modules are developed.

Posted in: Products, Manufacturing & Prototyping, Motion Control

Read More >>

The U.S. Government does not endorse any commercial product, process, or activity identified on this web site.