Motion Control

Magnetic Brakes

Danaher Motion (Wood Dale, IL) released the Thomson-Deltran Power-Off Magnetic Brake (PMB) series of power-off DC, spring-set, multifunctional brakes. Nine standard frame sizes from 30 to 120 are available. Torque range is 45 lb-in to 4,250 lb-in (5 to 48 Nm), in diameters from 3.30 to 11.89". Operating voltages of 24, 90, and 190 VDC are standard (other voltages are available on request). An adjustment collar allows brake torque to be varied, and the fully potted coils come under class “F” insulation.

Posted in: Products, Products, Products

Read More >>

Hybrid Linear Actuator

Haydon Switch & Instrument (Waterbury, CT) released size 8 hybrid linear actuators with encoder feedback. Encoder resolutions range from 120 to 330 cycles per revolution, or 480 to 1,200 pulses per revolution; encoder operating temperatures are -10 to 85°C. The optical incremental encoder design is available with two-channel quadrature TTL squarewave outputs. The units are available in resolutions ranging from 0.00006 to 0.00157" per step, and deliver thrusts of up to 10 lbs.

Posted in: Products, Products

Read More >>

Incremental Encoder

From SICK STEGMANN, INC. (Dayton, OH), the DRS61 CoreTech® Incremental Encoders can be programmed the number of lines from 1 to 8,192, as well as the width of the zero pulse. The units are available in face mount flange, servo flange, blind or through hollow shaft with connector or cable outlet, TTL, or HTL interface configurations. Interchangeable collets are available for the hollow shaft configurations in diameters of six to 15 mm and 0.25, 0.375, and 0.50".

Posted in: Products, Products

Read More >>

Torque Motor

Animatics Corp. (Santa Clara, CA) released the SM2315DT as part of the OEM Series of SmartMotors. The unit features an 8-pole rotor design with a high copper filling factor, and delivers 112 oz-in of peak torque while maintaining 57 oz-in of continuous torque with a maximum speed capability of 4,700 rpm. A servomotor, amplifier, and motion controller are incorporated.

Posted in: Products, Products

Read More >>

Rotating Torque Sensor

The Model 01424 rotating torque sensor from Sensor Developments (Lake Orion, MI) uses a shaft-to-shaft configuration for in-line placement, and incorporates a digital non-contact wireless system that provides power to the rotating electronics mounted on the shaft, transmitting the signal back to the receiver in digital format. The torque signal is then represented as a calibrated, high level analog voltage.

Posted in: Products, Products

Read More >>

Valve Motor

Eaton Corp. (Cleveland, OH) released the HP30 high-pressure disc valve motor for mobile off-highway applications requiring up to 30,000 in-lbs of intermittent torque. Options include a hydraulic parking brake offering up to 3,570 Nm of static holding torque. The device includes bearing pack, break, output shaft, and port mounts. Other features include a no-load pressure drop lower than 200 PSI at 25 GPM of flow. A two-piece balance ring provides mechanical and volumetric efficiencies. Continuous pressure is 170 liters per minute (45 GPM) at 310 bar (45,000 PSI); intermittent pressure is 265 LPM (70 GPM) at 345 bar (5,070 PSI). Maximum inlet pressure is 400 bar (6,000 PSI).

Posted in: Products, Products

Read More >>

Fringe Tracing Software

Engineering Synthesis Design, Inc. (Tucson, AZ) released the IntelliWave ™ interferometric measurement software package to monitor fringe change in fluid flow and thermodynamic analysis applications. The software allows for parallelism, angle, ROC, tool offset, homogeneity, and absolute measurements. Users can monitor over 30 fringe parameters (area, size, temperature, etc.), and may use any camera or scanner for data acquisition. Features include intuitive user interface, interactive spreadsheets, multi-region unwrapping and masking, real-time user interaction, and classical, shearing and speckle analysis.

Posted in: Products, Products

Read More >>