Test & Measurement

No-Power Wi-Fi Connectivity Could Fuel Internet of Things

Imagine a world in which your wristwatch or other wearable device communicates directly with your online profiles, storing information about your daily activities where you can best access it, all without requiring batteries. Or, battery-free sensors embedded around your home that could track minute-by-minute temperature changes and send that information to your thermostat to help conserve energy.

Posted in: Electronics & Computers, Power Management, Sensors, Test & Measurement, Monitoring, Communications, Wireless, RF & Microwave Electronics, News, Products

Read More >>

Ferroelectric Materials Could Revolutionize Data-Driven Devices

Electronic devices with unprecedented efficiency and data storage may someday run on ferroelectrics — remarkable materials that use built-in electric polarizations to read and write digital information, outperforming the magnets that are inside most popular data-driven technology. But ferroelectrics must first overcome a few key stumbling blocks, including a curious habit of "forgetting" stored data. Now, however, scientists at the U.S. Department of Energy's Brookhaven National Laboratory have discovered nanoscale asymmetries and charge preferences hidden within ferroelectrics that may explain their operational limits.

Posted in: Electronics & Computers, Electronic Components, Board-Level Electronics, Electronics, Power Management, Computers, Materials, Metals, Test & Measurement, Measuring Instruments, News

Read More >>

Automated Imaging System Analyzes Underground Root Systems

Researchers from the Georgia Institute of Technology and Penn State University have developed an automated imaging technique for measuring and analyzing the root systems of mature plants. The technique, believed to be the first of its kind, uses advanced computer technology to analyze photographs taken of root systems in the field. The imaging and software are designed to give scientists the statistical information they need to evaluate crop improvement efforts.“We’ve produced an imaging system to evaluate the root systems of plants in field conditions,” said Alexander Bucksch, a postdoctoral fellow in the Georgia Tech School of Biology and School of Interactive Computing. “We can measure entire root systems for thousands of plants to give geneticists the information they need to search for genes with the best characteristics.”Imaging of root systems has, until now, largely been done in the laboratory, using seedlings grown in small pots and containers. Such studies provide information on the early stages of development, and do not directly quantify the effects of realistic growing conditions or field variations in water, soil, or nutrient levels.The technique developed by Georgia Tech and Penn State researchers uses digital photography to provide a detailed image of roots from mature plants in the field. Individual plants to be studied are dug up and their root systems washed clean of soil. The roots are then photographed against a black background using a standard digital camera pointed down from a tripod. A white fabric tent surrounding the camera system provides consistent lighting.The resulting images are then uploaded to a server running software that analyzes the root systems for more than 30 different parameters, including the diameter of tap roots, root density, the angles of brace roots, and detailed measures of lateral roots.SourceAlso: Learn about Strobing to Enhance Display Legibility.

Posted in: Electronics & Computers, Cameras, Imaging, Software, Test & Measurement, Measuring Instruments, News

Read More >>

High Precision Multi-channel PXIe Systems Realize More Efficient Wind Tunnel Testing

Wind tunnel testing is widely used in large-scale aerodynamic design projects. Even so, the requirement for large numbers of sensors over large areas of the devices to be tested presents major challenges in data acquisition and retrieval. The article discusses use of multi-channel PXIe systems to achieve fully synchronous, high-efficiency, highly precise measurement solutions. Attributes include: PXIe technology providing effective single-system integration with multiple combinations of a wide variety of sensors PXIe platforms’ PC-based structure delivering easily deployed superior computing power along with networking capability, minimizing development time and simplifying setup

Posted in: Test & Measurement, White Papers

Read More >>

How to Maximize Temperature Measurement Accuracy

Thermocouples are the most versatile and widely used devices for temperature measurements. Most test engineers are aware of the measurement errors caused by thermocouples but not always about the errors caused by the measurement system itself. This technical note will focus on the lesser known and important aspect called "Self-Calibration" and how it can be used to overcome errors in temperature measurement.

Posted in: Test & Measurement, White Papers

Read More >>

3D Printer Heads to International Space Station

The first 3D printer is soon to fly into Earth orbit, finding a home aboard the International Space Station (ISS). The size of a small microwave, the unit is called Portal. The hardware serves as a testbed for evaluating how well 3D printing and the microgravity of space combine. The soon-to-fly 3D printer can churn out plastic objects within a span of 15 minutes to an hour.The technology works by extruding heated plastic, and then builds successive layers to make a three-dimensional object. In essence, the test on the ISS might well lead to establishing a “machine shop” in space. The 3D printer experiment is being done under the tech directorate's Game Changing Development Program, a NASA thrust that seeks to identify and rapidly mature innovative/high impact capabilities and technologies for infusion in a broad array of future NASA missions.According to the team, manufacturing assets in space, as opposed to launching them from Earth, will accelerate and broaden space development while providing unprecedented access for people on Earth to use in-space capabilities. SourceAlso: Learn about Ammonia Leak Detection on the ISS.

Posted in: Manufacturing & Prototyping, Rapid Prototyping & Tooling, Materials, Plastics, Test & Measurement, Aerospace, News

Read More >>

Universal Mechanical Testers for Tribology Testing in the Automotive Industry

Universal mechanical testers provide tribology testing for friction, wear, coatings, and lubrication in macro, micro, and nano regimes. Bruker Nano Surfaces, Tucson, Arizona Very few industries are as affected by strict test standards as the automotive sector. Nearly every automobile component (engine parts, accelerators, clutches, brakes, tires, seatbelts, etc.) must exhibit adequate tribological properties in accordance with ASTM, DIN, JIS, ISO, and other comprehensive international standards. Universal mechanical testers (UMTs) that are able to perform multiple tests in a single platform with interchangeable modules can help manufacturers meet test specifications quickly and economically. For example, crankshafts and camshafts have critical requirements for proper functioning under diverse service conditions. Tests include evaluation of base materials, heat-treated parts, surface coatings, and lubricants. Tests can be run with diverse loads, velocities, and temperatures that simulate actual service conditions using various lubricants and liquids.

Posted in: Mechanical Components, Test & Measurement, Briefs

Read More >>