Test & Measurement

Unmanned Aircraft Tested as Tool for Measuring Polar Ice Sheets

Scientists studying the behavior of the world's ice sheets — and the future implications of ice sheet behavior for global sealevel rise — may soon have a new airborne tool that will allow radar measurements that previously would have been prohibitively expensive or difficult to carry out with manned aircraft.

Posted in: Environmental Monitoring, Green Design & Manufacturing, Test & Measurement, Measuring Instruments, Monitoring, Aerospace, Aviation, RF & Microwave Electronics, News

Read More >>

OCULLAR Provides Around-the-Clock Ocean Measurements

A team led at NASA's Goddard Space Flight Center in Greenbelt, Md., has developed an instrument capable of observing ocean color during normal sunlight conditions and under moonlight — a first-ever capability that will allow scientists to monitor the health and chemistry of the planet’s oceans literally around the clock.The prototype Ocean Color Underwater Low Light Advanced Radiometer (OCULLAR) has shown in field testing that it can measure ocean color under low-light conditions across multiple wavelength bands, from the ultraviolet to the near-infrared. In contrast, current remote-sensing instruments can obtain measurements — based on electromagnetic energy emitted by the sun, transmitted through the atmosphere, reflected off Earth’s surface, or upwelled from water masses — only during daylight hours, said Principal Investigator Stan Hooker.Of particular interest to scientists studying ocean color is phytoplankton, the microscopic ocean plants that form the base of the oceanic food web. The tiny plants use sunlight and carbon dioxide to produce organic carbon. This process, called photosynthesis, is possible because plants contain chlorophyll, green-colored compounds that trap the energy from sunlight. Because different types of phytoplankton contain different kinds of chlorophyll, measuring the color of a particular area allows scientists to estimate the amount and general type of phytoplankton there. Since phytoplankton also depend on specific conditions for growth, they frequently become the first to be affected by pollution or some other change in their environment.Until now, however, obtaining these measurements was limited to daylight hours and only during the spring, summer and fall months in the polar regions — a problem Hooker sought to correct with OCULLAR. The successful OCULLAR demonstration leads the way to anticipated commercialization and creates a new capability for oceanographers, climate scientists, and others interested in quantifying, understanding, and monitoring the biological productivity of oceans, coastal areas, and inland waters.SourceAlso: Learn about a Data Assimilation System for Coastal Ocean Prediction.

Posted in: Photonics, Environmental Monitoring, Green Design & Manufacturing, Test & Measurement, Measuring Instruments, Monitoring, News

Read More >>

NASA Simulator Recreates Space Dust

A team of scientists at NASA's Ames Research Center in Moffett Field, California, has successfully reproduced, on Earth, the processes that occur in the atmosphere of a red giant star and lead to the formation of planet-forming interstellar dust.Using a specialized facility, called the Cosmic Simulation Chamber (COSmIC), scientists now are able to recreate and study dust grains similar to the grains that form in the outer layers of dying stars. Scientists plan to use the dust to gather clues to better understand the composition and the evolution of the universe.In the past, the inability to simulate space conditions in the gaseous state prevented scientists from identifying unknown matter. Because conditions in space are vastly different from conditions on Earth, it is challenging to identify extraterrestrial materials. Thanks to COSmIC, researchers can successfully simulate gas-phase environments similar to interstellar clouds, stellar envelopes, or planetary atmospheres environments by expanding gases using a cold jet spray of argon gas seeded with hydrocarbons that cools down the molecules to temperatures representative of these environments.COSmIC integrates a variety of state-of-the-art instruments to allow scientists to recreate space conditions in the laboratory to form, process, and monitor simulated planetary and interstellar materials. The chamber is the heart of the system. It recreates the extreme conditions that reign in space where interstellar molecules and ions float in a vacuum at densities that are billionths of Earth's atmosphere.SourceAlso: Learn about Coatings for Lunar Dust Removal.

Posted in: Materials, Test & Measurement, Monitoring, Aerospace, News

Read More >>

Wind Tunnel Tests Support Improved Design of B61-12 Bomb

Sandia National Laboratories has finished testing a full-scale mock unit representing the aerodynamic characteristics of the B61-12 gravity bomb in a wind tunnel. The tests on the mock-up were done to establish the configuration that will deliver the necessary spin motion of the bomb during freefall and are an important milestone in the Life Extension Program to deliver a new version of the aging system.

Posted in: Motion Control, Motors & Drives, Test & Measurement, Aerospace, Defense, News

Read More >>

Testing Composite Structures for Stronger Bridges

The J. Lohr Structures Laboratory at South Dakota State University helps companies develop new materials and products — self-consolidating concrete columns and pre-stress concrete bridge girders — that bridge a physical gap. Over the past decade, researchers have conducted structural testing on large- and full-scale test specimens for private companies and government entities.

Posted in: Materials, Composites, Test & Measurement, Transportation, News

Read More >>

Big Ideas for Small Spaces

Over 24 hours from April 4 to 5, six top French design studios conceived and presented new product concepts for urban environments during the Small Spaces Design Hackathon, presented by Cut&Paste in partnership with Hewlett-Packard. In dense city neighborhoods, homes are small and office space is at a premium, so urban dwellers must be more creative in how they use their space. The design concepts were presented at Cyclone Le Studio as part of ZED, HP’s creative popup space.

Posted in: Electronics & Computers, Power Management, PCs/Portable Computers, Imaging, Displays/Monitors/HMIs, Software, Computer-Aided Design (CAD), Computer-Aided Engineering (CAE), Computer-Aided Manufacturing (CAM), Energy, Lighting, Test & Measurement, Monitoring, News

Read More >>

Optical Inspection System Finds Defects in Ultra-High-Speed Manufacturing

Researchers at the Fraunhofer Institute for Physical Measurement Techniques IPM in Germany have developed an optical inspection system called WIRE-AOI that can detect defects in strip products such as pipes, rails, and wires in real time. The system detects micro-defects that zoom past it at 10 meters per second, and are no thicker than a human hair. Workers then see the processed defects depicted graphically on a monitor, and can remove the corresponding pieces.

Posted in: Cameras, Imaging, Photonics, Optics, Test & Measurement, Measuring Instruments, News

Read More >>

White Papers

Enhancing the Long-Term Reliability of Electronic Assemblies with Conformal Coatings
Sponsored by Master Bond
Epoxies and Glass Transition Temperature
Sponsored by Master Bond
Tubing & Hose Buying Tips
Sponsored by Newage Industries
Miniature SAW Filters for Automotive Telematics
Sponsored by EPCOS
Is There an Easy Way to Cut the Cost of EWIS Compliance?
Sponsored by Mentor Graphics
Using Acoustic Beamforming for Pass-By Noise Source Detection
Sponsored by National Instruments

White Papers Sponsored By: