2011

This tool provides single-point measurement of batteries.

The dependability of energy storage devices — particularly batteries — is becoming increasingly important to consumers, industry, and the military. As battery technology becomes more complex and users' expectations become more pronounced, there is a pressing need for highly accurate assessment techniques that can give state-of-health readings in conditions approaching real time.

This test could eliminate the need for more expensive follow-up tests.

Borrowing concepts from medical diagnostic devices, researchers have created a simple, inexpensive set of handheld tests that can detect the presence of many water- or food-borne pathogens. If applied in the field, such tests could greatly reduce the number of expensive follow-up tests needed to keep the food supply safe from fecal contamination.

Tiny, soft, transparent, nanofabricated devices can be integrated into a contact lens.

The Micro-ring resonator detector can determine the speed of blood flow and the oxygen metabolic rate at the back of the eye. This information could help diagnose such common and debilitating diseases as macular degeneration and diabetes. The tiny, transparent device can fit into a contact lens, and could help a range of scientific endeavors from biomedicine to geology.

The device miniaturizes bench-scale analyses in a handheld, low-power device.

Devices for manipulating fluids on the microscale have been developed to store, hold, and manipulate small amounts of fluids, and have been applied to the detection of analytes in sample fluids. Manipulating fluids and performing capillary electrophoresis in microfluidic devices promises advantages of small size, high throughput, low sample volumes, and low cost.

These systems have applications in machine shops, and in automotive and aircraft parts and manufacturing.

When performing machine tool setup and maintenance operations, it is frequently necessary to use a position transducer to “sweep” a surface and establish its relationship to a machine. A machine operator or maintenance technician typically attaches a position indicator to one portion of a machine, and then sweeps the position transducer over the object of interest, while observing the indicator run-out. If necessary, multiple adjustments and re-checks are made to the position of the object to obtain the desired alignment condition.

New linear solutions are significantly simpler than the previous complex nonlinear solutions.

The wireless radio positioning or radiolocation problem is of great importance in society today. Existing radiolocation systems such as the Global Positioning System (GPS), Radio-Frequency Identification (RFID) systems, and Ultra Wide-Band (UWB) systems use propagating EM waves and show reduced accuracy in non-line-of-sight (NLoS) environments due to propagation losses, delays, or multi-path effects. These significantly limit their use in radiolocation applications where the line of sight to the device is blocked. Examples of these are many, and include radiolocation for a device inside a cave or building, embedded underground or in a tunnel or mine, and for underwater applications, which covers a multitude of space, military, and civilian applications. In addition to these severe limitations, existing radiolocation systems using propagating EM waves enable ranging and positioning, but cannot provide precision two-dimensional (2D) or three-dimensional (3D) orientation sensing, which is critical in many applications where the sensor's attitude is important.

This tool can be used in any industry using double-walled storage tanks.

Stennis Space Center has the need to measure the inner wall thickness of cryogenic storage tanks without entering the inner tank of the double-walled vessels. It was proposed that an ultrasonic probe be inserted through access points in the outer wall of the vessel and delivered to the inner wall of the vessel, which would provide for at least a discrete set of inner wall thickness measurements where access points were available.

Before a new high-power semiconductor device can be used for industrial applications, it must be thoroughly tested to determine if it will survive environmental stresses and continue to meet specifications. This is especially true for the latest wide-bandgap semiconductor materials such as silicon carbide (SiC) and gallium nitride (GaN) to ensure they can withstand high voltage and temperatures.

Researchers from the University of Colorado Boulder and Northwestern University have developed a tiny, soft, and wearable acoustic sensor that measures vibrations in the human body, allowing them to monitor human heart health and recognize spoken words. The stretchable device captures physiological sound signals from the body, has physical properties matched with human skin, and can be mounted on nearly any surface of the body. The sensor resembles a small Band-Aid®, weighs less than one-hundredth of an ounce, and can gather continuous physiological data.

Environmental monitoring — the assessment of air, water, and soil quality — is highly important to oil and gas exploration companies, landowners, regulatory agencies, municipalities, and any organization measuring emissions and pollutants. The majority of monitoring technologies, however, are expensive and labor intensive, often requiring sample collection and preparation (i.e., external lab analysis) that can dramatically alter the sample and its inherent components. Of those technologies that do allow for in-situ analysis, few are amenable to measurements under harsh conditions, such as high temperature and/or pressure.

The U.S. Government does not endorse any commercial product, process, or activity identified on this web site.