Products

Gigabit Ethernet Cameras

Baumer, Southington, CT, has introduced the TXG series of Gigabit Ethernet cameras designed to provide Power over Gigabit Ethernet, eliminating the need for a separate power cable. The cameras are designed for vision systems such as robotic applications where additional cables can be problematic. An industrial dual-port power injector module or multi-point power switches provide power the Ethernet cable at distances up to 100 m.

Posted in: Products, Imaging
Read More >>

Model RPM10 Photo/Contact Tachometer

Extech Instruments, Waltham, MA, has introduced the Model RPM10 photo/contact tachometer that includes a built-in, noncontact infrared thermometer with laser pointer that provides surface temperature measurement ranging from -4 to 572°F in locations that are unsafe or hard to reach. It features a 6:1 field of view, allowing a 1" spot to be measured at a distance of 6". Combining infrared temperature with RPM measurement, it can be used for evaluating motor performance and detecting bearing or insulation failure. In photo mode, the device uses a laser light source and measures 10 to 99,999 RPM from up to 6.5' from the target. In the contact mode, it measures from 0.5 to 20,000 RPM, while linear surface speed measurements range from 0.2 to 6,560 ft/min, and 0.05 to 1,999.9 m/min. Characters in the display change direction so that readings can be seen regardless of which end of the device is being used. Readings are displayed on an LCD, and memory stores the last maximum and minimum readings. The device is constructed with a double-molded housing, and comes with tips and wheels for RPM or linear surface speed, four 1.5V AA batteries, reflective tape, a rubber boot, and carrying case.

For Free Info Click Here

Posted in: Products
Read More >>

Accelerometer

The KXTE9 accelerometer from Kionix (Ithaca, NY) has embedded algorithms for orientation and activity monitoring. The algorithms simplify the adoption of motion-based functionality in consumer electronics, while reducing operating power consumption.

Posted in: Products
Read More >>

Optical Encoder

The TONIC optical encoder from Renishaw (Hoffman Estates, IL) packs advanced optics and electronics into a compact read-head measuring 35 × 13.5 × 10 mm. Available in both linear and rotary versions, it supports applications from standard motion control to ultra-high precision stages.

Posted in: Products
Read More >>

24Vdc Gearmotor

The Model No. MMP-TM55-24V GP52-059 dc gearmotor from Midwest Motion Products (Watertown, MN) produces 60in.-lb. of torque at 78 rpm. Designed to operate on 24 Vdc, it measures 2.14in. diameter × 7.75in. long, and has a keyed output shaft 12mm diameter × 25mm long. Mounting is via four M5 threaded holes.

Posted in: Products
Read More >>

Ball Valve

A miniature ball valve from Beswich Engineering (Greenland, NH) comes in two configurations. The MBV-1010-303 is for applications requiring an on/off valve, while the MBVT-1010-303 is for applications requiring selecting one of two possible flow paths. The valves weigh 9 and 12 grams, respectively.

Posted in: Products
Read More >>

Hydraulic Power Pack

The KA power pack from HAWE Hydraulics (Charlotte, NC) can supply pressure up to 10,000 psi utilizing a radial piston pump, or up to 2,900 psi utilizing a gear pump.

Posted in: Products
Read More >>

Servo Motors

The SM2315D-PLS2 and SM2315DT-PLS2 integrated servo motors from Animatics Corp. (Santa Clara, CA) have a built-in controller, encoder, and amplifier, and can be programmed to control several machines. They achieve resolution up to 4,000 counts/rev. to offer smoother velocity and tighter position control.

Posted in: Products
Read More >>

Clean Room Motor

The Clean Motors from HaydonKerk Motion Solutions (Waterbury, CT) are designed to limit contaminants and outgassing in vacuum environments. The motors operate in vacuum down to 10-9 Torr.

Posted in: Products
Read More >>

Micro Manipulator

The MT 105-50-LM micro manipulator stage from Steinmeyer (Burlington, MA) provides a positional accuracy of 1 micrometer, straightness/flatness runout of +/1 micrometer, and repeatability of +/0.2 micrometers. It measures 105 × 151 × 25 mm and weighs 1.0 kg.

Posted in: Products
Read More >>

The U.S. Government does not endorse any commercial product, process, or activity identified on this web site.