Features

Simulating Material Migration

Accurately tracking and predicting the subsurface migration of specific materials over time and over multiple phases is critical to efficient and effective strategy development and deployment in a growing number of applications. STOMP (Sub surface Transport Over Multiple Phases) is a general-purpose tool that provides multidimensional analysis of subsurface flow and reactive transport phenomena. It was originally designed to support environmental remediation of subsurfaces contaminated with volatile organic compounds and/or radioactive material.

Posted in: Articles, Materials, Simulation Software, Computer simulation, Materials properties
Read More >>

Optimizing Fuel Filters via Simulation

Cars contain numerous filters for air, fuel, and oil. Those who develop these filters are confronted with many requirements. The products must withstand intense temperature fluctuations and vibrations, fit into a predefined installation space, and comply with increasingly stringent quality standards, all while development times get shorter.

Posted in: Articles, Simulation Software, Computer simulation, Optimization, Fuel filters
Read More >>

Designing for 3D Printing

3D printing has progressed over the past decade to include multimaterial fabrication, enabling production of powerful, functional objects. While many advances have been made, it still has been difficult for non-programmers to create objects made of many materials (or mixtures of materials) without a more user-friendly interface.

Posted in: Articles, Manufacturing & Prototyping, Simulation Software, CAD / CAM / CAE, CAD, CAM, and CAE, Rapid prototyping, Additive manufacturing
Read More >>

Camera-Equipped Vehicles ‘See the Light’ in Cities

Imagine if every police car, bus, and garbage truck gathered important infrastructure data as they made their usual routes through the city.

In different field tests around the world, re searchers from the Massachusetts Institute of Technology (Cam bridge, MA) mounted a camera-and-sensor system to the tops of vehicles. As the cars traveled up and down streets, sophisticated software recognized and recorded the presence and strength of street lights. The software estimated pole heights and distinguished between the street lamp’s output and other points of illumination.

Posted in: Articles, Automotive, Optics, Imaging, Imaging and visualization, Optics, Sensors and actuators, Imaging, Imaging and visualization, Optics, Sensors and actuators, Intelligent transportation systems
Read More >>

Developing a Laser System to Decrease the Rate of Neurodevelopment Issues

A fairly new biomedical imaging modality, optoacoustic imaging is based on the use of laser-generated ultrasound. According to the National Center for Biotechnology Information, it is a hybrid method that has emerged over the past two decades, combining the high-contrast and spectroscopic-based specificity of optical imaging with the high spatial resolution of ultrasound imaging.

Posted in: Articles, Diagnostics, Imaging, Medical, Lasers & Laser Systems, Optics, Imaging, Imaging and visualization, Lasers, Imaging, Imaging and visualization, Lasers, Medical equipment and supplies, Nervous system
Read More >>

SPIE Photonics West 2017 Preview

The SPIE Photonics West 2017 technical conference and exhibition returns to The Moscone Center in San Francisco, January 28 through February 2, offering attendees the opportunity to explore the latest innovations in lasers, photonics, optics, optoelectronics, biophotonics, biomedical optics, 3D printing, and more. As in the past, the event will once again kick off with BiOS, the world’s largest biomedical optics conference, before transitioning into the Photonics West conference and exhibition. Last year’s event hosted more than 20,000 attendees and put the products and services of over 1,300 exhibitors on display. More than 4,800 technical papers will be available to conference participants throughout the week (http://spie.org/photonicswest.xml).

Posted in: Articles, Photonics, Lasers, Optics, Lasers, Optics, Career and professional development, Product development, Additive manufacturing
Read More >>

Fabricating Optical Mirrors for Use in Outer Space Measurements

There are many ways to manufacture an optic depending on the complexity of the component and the application. From choosing the best substrate, to detailing the numerous operations required to make the optic, all the while considering tight tolerances and other specifications. This article highlights the precision needed to successfully fabricate the mirrors for the Hobby-Eberly Telescope Dark Energy Experiment’s (HETDEX’s) Visible Integral Field Replicable Unit Spectrographs (VIRUS) unit which was designed to measure dark energy in outer space.

Posted in: Application Briefs, Aerospace, Optics, Measuring Instruments, Mirrors, Measurements, Fabrication
Read More >>

Making VR a NASA Reality

NASA researchers want to prove that a virtual reality headset like the Oculus Rift is not just a toy. Josh Kinne, a deputy project manager at NASA Langley Research Center, sees a future role for virtual and augmented reality in the agency’s research and development, CAD design, and data visualization efforts.

Posted in: Application Briefs, Aerospace, Optics, Computer-Aided Design (CAD), Simulation Software, CAD / CAM / CAE, CAD, CAM, and CAE, Computer simulation, Virtual reality
Read More >>

Laser-Driven Light Source

Energetiq Technology (Woburn, MA) has introduced its 5th generation, ultra-bright, Laser-Driven Light Source (LDLS™), the EQ-77. The EQ-77 offers higher radiance and irradiance from a truly broadband white light source. The EQ-77 features a compact lamp house, with clean construction that ensures long life and ultimate stability. With a wavelength range from 170nm in the deep ultraviolet to >2µm in the near infrared, and a choice of dual-beam output or a single-beam output with retro-reflector, the EQ-77 is flexible for a broad variety of applications.

To learn more, click here

Posted in: Products, Lasers & Laser Systems
Read More >>

Diffuse Reflectance Probe

The Ocean Optics (Dunedin, FL) Diffuse Reflectance Probe (DR-Probe) measures 45° diffuse reflectance, enhancing UV-Vis and NIR spectroscopy results. The DR-Probe integrates a light source and collection optics into one unit. With the probe’s collection optics fixed in place relative to the light source, the measurement geometry is constant. An included standoff accessory ensures a consistent 40 mm focal length between the probe and the sample. The DR-Probe has rugged, all-metal construction for durability, and its 6W tungsten halogen bulb has a 10,000-hour lifetime.

To learn more, click here

Posted in: Products, Optics, Photonics, Instrumentation
Read More >>

The U.S. Government does not endorse any commercial product, process, or activity identified on this web site.