Tech Exchange

Indoor Air Quality Improvements

A company wants to decrease the frequency and severity of respiratory illness in homes with adults, teens, and children. Affordable indoor air quality improvement solutions must be provided to consumers via an air purification device. The client seeks a third-party partner who can offer a currently commercialized/ available air purifier. The pollutants that must be removed from indoor air include particulates, sulfuric acid, ozone, sulfur dioxide, nitrogen oxide, carbon monoxide, and volatile organic compounds.

Posted in: NASA Tech Needs
Read More >>

Air and Moisture Removal Within Closed Containers

Many types of food spoilage are slowed when air and moisture are removed from around the food. Current removal solutions, however, are expensive, take up too much space, and require complicated processes. A new technology must remove air and moisture with the single push of a button. Any proposed device should be incorporated into the container. A previously attempted solution included a countertop appliance that, using a vacuum, sealed a bag with heat.

Posted in: NASA Tech Needs
Read More >>

Biodegradable Silica Gel Fiber Regenerates Cell Tissue

An inorganic, biodegradable silica gel fiber (SGF) acts as a physical scaffold to aid the growth of new cells and the collagen structure that supports them. As a scaffold, it can also be used to deliver drugs over a wide area to aid in healing. The material is integrated into the tissues and resorbed by the body. Unlike collagen, the SGF scaffold stays in the wound for 1–2 weeks before resorption. Dimension as well as degradation speed can be adjusted from millimeters up to several hundred square centimeters.

Posted in: Techs for License
Read More >>

Nozzle Produces Ultrafine Droplets

Energy-saving nozzles offer droplet sizes down to 25 microns, at operating pressures as low as 100 psi. Nozzle passages, including metering slots, spin chambers, and exit orifices, are designed to minimize pressure drop, resulting in conservation of pump energy up to the exit orifice.

Posted in: Techs for License
Read More >>

Extensible Light-Sensing LED Array

New technology developed at NDSU uses an extensible array of light-emitting diodes (LEDs) as a means of sensing incident light levels. This light-sensing LED array can be used to construct highly-dynamic backlights for displays, as well as large-format synthetic aperture cameras.

Posted in: Techs for License, Lighting, Light emitting diodes (LEDs), Optics, Sensors and actuators, Light emitting diodes (LEDs), Optics, Sensors and actuators, Displays, Displays, Product development
Read More >>

Heterocycles for Use in Electronic Devices

Synthesis of heterocyclic aromatic compounds has been pursued for a long time by chemists in order to analyze their properties and potential applications in biomedical and materials sciences including electronic devices such as organic light emitting devices (OLEDs) and in hydrogen storage.

Posted in: Techs for License, Lighting, Electronic equipment, Electronic equipment, Medical, health, and wellness, Research and development, Chemicals, Materials properties
Read More >>

NASA Medical Capabilities for Space Missions

Ensuring the health, safety, and effective performance of astronauts is critical to the human exploration of space. During missions to the Moon, Mars, or asteroids, crewmembers must have access to advanced medical technologies and protocols to prevent health problems, diagnose disease, treat injuries, and minimize illnesses that may occur in the course of a mission. The Human Research Program (HRP) at Glenn Research Center (Glenn) is seeking government, university, or industry partners to develop medical capabilities that can help to secure the health and safety of astronauts during space missions.

Posted in: NASA Tech Needs
Read More >>

Increased Steel Surface Friction

An organization seeks innovative processes or coatings for steel. The application requires that a normal force be applied between two lubricated steel surfaces. Excessive normal force results in system power losses and increase in wear; the desired solution will permanently increase the coefficient of friction so that the normal force can be minimized. Solutions could be based around altering or hardening the surface of the steel, or applying a coating to the steel or another material.

Posted in: NASA Tech Needs
Read More >>

Halogen-Free Fire Retardants

A company must achieve standard, non-halogenated fire retardancy on cabling. Methods may include plastic compounds, coatings, polymers, or additives. The UL tests define the fire-retardant properties that the cable must exhibit after treatment — notably, ignition resistance, flame spread resistance after ignition, elimination of burn drips after ignition, low peak smoke release rate, and low total smoke released.

Posted in: NASA Tech Needs
Read More >>

Synthetic Material Offers Touch-Feel of Genuine Leather

A synthetic leather material delivers a durable touch-feel. The design is based on the way that the human fingertip interacts with surfaces along four different axes of material properties. The fingertip determines whether a surface is soft or hard, smooth or coarse, wet or dry, and warm or cold. By discovering the relationship between the fingertip and the sensations produced by feeling high-quality, hide-based material, engineers set the appropriate physical properties.

Posted in: Techs for License
Read More >>

The U.S. Government does not endorse any commercial product, process, or activity identified on this web site.