Electronic Components

Wearable Nanowire Sensors Monitor Electrophysiological Signals

Researchers from North Carolina State University have developed a new, wearable sensor that uses silver nanowires to monitor electrophysiological signals, such as electrocardiography (EKG) or electromyography (EMG). The new sensor is as accurate as the “wet electrode” sensors used in hospitals, but can be used for long-term monitoring and when a patient is moving.

Posted in: News, News, Electronic Components, Electronics & Computers, Medical, Patient Monitoring, Nanotechnology, Semiconductors & ICs, Sensors
Read More >>

Technology Diagnoses Brain Damage from Concussions, Strokes, and Dementia

New optical diagnostic technology developed at Tufts University School of Engineering promises new ways to identify and monitor brain damage resulting from traumatic injury, stroke, or vascular dementia in real time and without invasive procedures.

Posted in: News, Electronic Components, Electronics & Computers, Diagnostics, Medical, Fiber Optics, Optics, Photonics, Semiconductors & ICs, Measuring Instruments, Test & Measurement
Read More >>

15 Questions to Ask About Circuit Protection for Wearable Electronics

Have you attended an electronics or design tradeshow lately? Have you visited a big-box retailer or browsed an online electronics vendor? If so, you’ve probably seen many examples of wearable technology, including smart glasses, clothing, wristwear, footwear, neckwear, and headbands. Wearable computing is one of the hottest consumer electronics trends on the market, with global sales expected to grow from $14 billion in 2014 to over $70 billion in 2024, according to IDTechEx.

Posted in: Articles, Electronic Components, Electronics & Computers, Power Management, Electronic equipment, Electronic equipment
Read More >>

Researchers Develop a Way to Control Material with Voltage

A new way of switching the magnetic properties of a material using just a small applied voltage, developed by researchers at MIT and collaborators elsewhere, could signal the beginning of a new family of materials with a variety of switchable properties. The technique could ultimately be used to control properties other than magnetism, including reflectivity or thermal conductivity. The first application of the new finding is likely to be a new kind of memory chip that requires no power to maintain data once it’s written, drastically lowering its overall power needs. This could be especially useful for mobile devices, where battery life is often a major limitation.

Posted in: News, Batteries, Board-Level Electronics, Electronic Components, Electronics & Computers, Power Management, Materials, Metals, Semiconductors & ICs
Read More >>

Garnet Ceramics Could Be the Key to High-Energy Lithium Batteries

Scientists at the Department of Energy’s Oak Ridge National Laboratory have discovered exceptional properties in a garnet material that could enable development of higher-energy battery designs. The ORNL-led team used scanning transmission electron microscopy to take an atomic-level look at a cubic garnet material called LLZO. The researchers found the material to be highly stable in a range of aqueous environments, making the compound a promising component in new battery configurations.

Posted in: News, Batteries, Electronic Components, Electronics & Computers, Power Management, Energy, Energy Efficiency, Ceramics, Materials, Semiconductors & ICs
Read More >>

New System Could Prolong Power in Mobile Devices

Researchers from The University of Texas at Dallas have created technology that could be the first step toward wearable computers with self-contained power sources or, more immediately, a smartphone that doesn’t die after a few hours of heavy use. The technology taps into the power of a single electron to control energy consumption inside transistors, which are at the core of most modern electronic systems.

Posted in: News, Electronic Components, Electronics & Computers, PCs/Portable Computers, Power Management, Semiconductors & ICs
Read More >>

Researchers Develop Thinnest Electric Generator

Researchers from Columbia Engineering and the Georgia Institute of Technology made the first experimental observation of piezoelectricity and the piezotronic effect in an atomically thin material, molybdenum disulfide (MoS2), resulting in a unique electric generator and mechanosensation devices that are optically transparent, extremely light, and very bendable and stretchable.

“This material—just a single layer of atoms—could be made as a wearable device, perhaps integrated into clothing, to convert energy from your body movement to electricity and power wearable sensors or medical devices, or perhaps supply enough energy to charge your cell phone in your pocket,” says James Hone, professor of mechanical engineering at Columbia and co-leader of the research.

Hone’s team placed thin flakes of MoS2 on flexible plastic substrates and determined how their crystal lattices were oriented using optical techniques. They then patterned metal electrodes onto the flakes. In research done at Georgia Tech, a group led by Zhong Lin Wang, Regents’ Professor in Georgia Tech’s School of Materials Science and Engineering, installed measurement electrodes on the samples provided by Hone’s group, then measured current flows as the samples were mechanically deformed. They monitored the conversion of mechanical to electrical energy, and observed voltage and current outputs.

Ultimately, Zhong Lin Wang notes, the research could lead to complete atomic-thick nanosystems that are self-powered by harvesting mechanical energy from the environment. This study also reveals the piezotronic effect in two-dimensional materials for the first time, which greatly expands the application of layered materials for human-machine interfacing, robotics, MEMS, and active flexible electronics.

Source

Also: Learn more about a Piezoelectric Energy Harvesting Transducer System.

Posted in: News, Electronic Components, Electronics, Electronics & Computers, Power Management, Materials, Metals, Semiconductors & ICs, Sensors
Read More >>

Ferroelectric Materials Could Revolutionize Data-Driven Devices

Electronic devices with unprecedented efficiency and data storage may someday run on ferroelectrics — remarkable materials that use built-in electric polarizations to read and write digital information, outperforming the magnets that are inside most popular data-driven technology. But ferroelectrics must first overcome a few key stumbling blocks, including a curious habit of "forgetting" stored data. Now, however, scientists at the U.S. Department of Energy's Brookhaven National Laboratory have discovered nanoscale asymmetries and charge preferences hidden within ferroelectrics that may explain their operational limits.

Posted in: News, Board-Level Electronics, Computers, Electronic Components, Electronics, Electronics & Computers, Power Management, Materials, Metals, Measuring Instruments, Test & Measurement
Read More >>

'Solar Battery' Runs on Light and Air

Ohio State University researchers report that they have succeeded in combining a battery and a solar cell into one hybrid device.

Key to the innovation is a mesh solar panel, which allows air to enter the battery, and a special process for transferring electrons between the solar panel and the battery electrode. Inside the device, light and oxygen enable different parts of the chemical reactions that charge the battery.

The university will license the solar battery to industry, where Yiying Wu, professor of chemistry and biochemistry at Ohio State, says it will help tame the costs of renewable energy.

“The state of the art is to use a solar panel to capture the light, and then use a cheap battery to store the energy,” Wu said. “We’ve integrated both functions into one device. Any time you can do that, you reduce cost.”

During charging, light hits the mesh solar panel and creates electrons. Inside the battery, electrons are involved in the chemical decomposition of lithium peroxide into lithium ions and oxygen. The oxygen is released into the air, and the lithium ions are stored in the battery as lithium metal after capturing the electrons.

When the battery discharges, it chemically consumes oxygen from the air to re-form the lithium peroxide. An iodide additive in the electrolyte acts as a “shuttle” that carries electrons, and transports them between the battery electrode and the mesh solar panel.

The use of the additive represents a distinct approach on improving the battery performance and efficiency, the team said. The invention eliminates the loss of electricity that normally occurs when electrons have to travel between a solar cell and an external battery.

Source

Also: Learn about Full-Cell Evaluation for New Battery Chemistries.

Posted in: News, Batteries, Electronic Components, Electronics & Computers, Power Management, Energy, Energy Storage, Renewable Energy, Solar Power, Semiconductors & ICs
Read More >>

Tiny Wireless Sensing Device Alerts Users to Telltale Vapors Remotely

A research team at the Georgia Tech Research Institute (GTRI) has developed a small electronic sensing device that can alert users wirelessly to the presence of chemical vapors in the atmosphere. The technology, which could be manufactured using familiar aerosol-jet printing techniques, is aimed at a variety of applications in military, commercial, environmental, healthcare and other areas.

Posted in: News, Communications, Wireless, Board-Level Electronics, Electronic Components, Electronics, Electronics & Computers, Nanotechnology, RF & Microwave Electronics, Semiconductors & ICs, Detectors, Sensors
Read More >>

The U.S. Government does not endorse any commercial product, process, or activity identified on this web site.