Electronics

Applying Wiring Harness Changes Without Damaging Your Electric System Design Flow

When an engineering change must be made to a wiring harness—and let’s face it, there is always going to be late-stage changes—it means you will make a change in multiple design steps. This Tech Talk discusses the challenges of applying changes and how to better handle them. For example, you might need to change an electric component that drives more current than the previous one. A change such as this can cause issues throughout your design flow: System Design, Wiring Design, and the Harness Design. The resulting inconsistencies lead to poor quality and prevent you from achieving your design cycle goals.

Posted in: Tech Talks, Electronics
Read More >>

Key Considerations for Powertrain HIL Test

Safety, availability, and cost considerations can make performing thorough tests of embedded control devices using the complete system impractical. Hardware-in-the-loop (HIL) simulation is a real-time test technique used to test these devices more efficiently. During HIL test, the physical system that interfaces to an embedded control device is simulated on real-time hardware, and the outputs of the simulator mimic the actual output of the physical system. The embedded controller “thinks” it is in a real system. HIL simulation meticulously tests embedded control devices in a virtual environment before proceeding to real-world tests of the complete system. This application note covers recommended best practices for powertrain HIL testing.

Posted in: White Papers, Electronics, Electronics & Computers, Simulation Software, Software
Read More >>

Basics of Electric Heaters

Hotwatt has manufactured specialized electric heating elements for over 64 years, all made in the USA. Products include cartridge, air process, immersion, strip and finned strip, tubular and finned tubular, band, compressor crankcase, foil, flexible rope and ceramic heaters. We are a quality supplier to OEM's in the in industrial, medical, commercial appliance, packaging, instrumentation, aviation, transportation and military fields.

Posted in: White Papers, White Papers, Electronics, Electronics & Computers, Instrumentation, Test & Measurement
Read More >>

PRINTED ELECTRONICS: THE FUTURE IS FLEXIBLE

Chances are that most of us have used a printed electronic device, whether it's a security tag on a piece of clothing, or a plastic badge used to open the door of our workplace. Printable electronics have diverse potential applications in flexible solar cells, batteries, sensors, lighting products, medical diagnostic devices, drug delivery devices, smart packaging and clothing, and displays. Following are several innovative applications incorporating printable electronics.

Low-Cost Printable Electronics Fabrication

The need for low-cost and environmentally friendly processes for fabricating printable electronics and biosensor chips is rapidly growing. NASA has developed a unique approach for an atmospheric pressure plasma-based process for fabricating printable electronics and functional coatings. This system involves aerosol-assisted, room-temperature printing in which an aerosol carrying the desired material for deposition is introduced into a cold plasma jet operated at atmospheric pressure.

Posted in: Articles, Electronics, Electronics & Computers, Electronic equipment, Sensors and actuators, Electronic equipment, Sensors and actuators, Additive manufacturing, Magnetic materials, Nanomaterials
Read More >>

Radar Waveforms for A&D and Automotive Radar

There are many similarities between commercial radar and those used in defense electronics applications. The same technology used in high-end automobiles may be considered for autonomous vehicles and unmanned systems. However, one similarity that transcends the sensor application is choosing the right radar waveform.

Posted in: White Papers, Aerospace, Defense, Electronics, Electronics & Computers, Sensors
Read More >>

Selecting the Right Material for 3D Printing

Materials must be suited to the application in order to have successful results. The properties of any material become increasingly important as a product progresses from concept and functional prototyping to production.

Posted in: White Papers, Electronics, Manufacturing & Prototyping, Test & Measurement
Read More >>

IEC 60601-1-2 Edition 4: New Requirements for Medical EMC

Plan now to ensure your medical devices comply with new IEC 60601-1-2 EMC 4th Edition standard requirements by the December 2018 effective date. Since the development cycle can be 2-3 years, it is important to understand the new standard now when designing medical devices.

Posted in: White Papers, White Papers, Electronics, Bio-Medical, Medical, Instrumentation
Read More >>

New Stamping Technique Enables Printable Electronics

The next time you place your coffee order, imagine slapping onto your to-go cup a sticker that acts as an electronic decal, letting you know the precise temperature of your coffee. Engineers at MIT have invented a fast, precise printing process that may make such electronic surfaces an inexpensive reality. The stamp is made from forests of carbon nanotubes and can print electronic inks onto rigid and flexible surfaces. The stamping process should be able to print transistors small enough to control individual pixels in high-resolution displays and touchscreens. It could also offer a relatively cheap, fast way to manufacture electronic surfaces for as-yet-unknown applications.

Posted in: UpFront, Electronics
Read More >>

Is nine hours a day too much "screen time?"

This week's Question: A recent study from Common Sense Media found that parents spend more than nine hours (9:22) a day with screen media, with the vast majority of that time being spent with personal screen media (7:43) and only a little more than 90 minutes devoted to work screen media. Most parents surveyed (78 percent) believe they are good media-use role models for their kids.

What do you think? Is nine hours a day too much "screen time?"

Posted in: Question of the Week, Computers, Electronics, Electronics & Computers
Read More >>

Edge-Connect SBC

ADL Embedded Solutions Inc. (San Diego, CA) has announced its compact ADLE3800SEC SBC with Edge-Connect. This ultra-compact 75mm x 75mm form factor is a full-featured, standalone SBC for rugged, embedded applications. The ADLE3800SEC is ideal for rugged, extended temperature intelligent systems with stringent size, weight, and power (SWAP) requirements. It boasts a wide thermal junction temperature (Tj) range (-40°C to +85°C), wide input voltage (20-30 VDC), DisplayPort, USB2.0, USB3.0 and two GLAN ports with support for DirectX 11, Open GL 4.0, and full HD video playback. The Edge-Connect architecture allows for added I/O expansion and connectors in a variety of baseboard/breakout board configurations (flat, vertical, odd-shapes, etc.).

Posted in: Products, Board-Level Electronics, Computers, Electronics, Electronics & Computers
Read More >>

The U.S. Government does not endorse any commercial product, process, or activity identified on this web site.