Energy

Hybrid Tractor-Trailers Take the Road

A prize-winning hybrid technology puts a Toyota Prius-like spin on the tractor trailer.

Posted in: Homepage, News, Automotive, Energy, Energy Efficiency, Energy Harvesting, Energy Storage, Renewable Energy
Read More >>

Thermal Management Solutions for Directed Energy Applications

Directed Energy is an emerging technology that is being utilized in a variety of military and other applications. These high powered devices demand superior thermal management that operates effectively and reliably in ever decreasing foot print areas. Not only do these systems need to maintain a safe operating temperature, they often demand strict temperature uniformity across the system.

Posted in: On-Demand Webinars, Energy
Read More >>

Survival of the Fittest - the Process Control Imperative

In tough times, manufacturers focus on reducing their operating costs, but may not be able to afford to spend their way out by buying more productive machinery. With that pathway closed, what are the opportunities for radically reducing costs without replacing existing machines? This paper explores Productive Process Pyramid™ and the four areas where substantial savings can be found if firms are prepared to change the way they control their machining processes.

Posted in: White Papers, Defense, Energy, Manufacturing & Prototyping
Read More >>

PTC Heater Brings Greater Control for Hand-held Medical Devices and Disposables

Point of Care diagnostics devices, whether handheld or single-use, often require a brief application of tightly controlled heat. The disposable nature of these devices requires a low-cost component capable of delivering that heat reliably and safely. Heatron's new PTC heater solution uses a polymer-based heater technology that controls heat to within ±2°C of the target temperature, and reduces unit cost by eliminating sensors and applied controls.

Posted in: White Papers, Briefs, TSP, Electronics & Computers, Thermoelectrics, Medical, Medical equipment and supplies, Heating, ventilation, and air conditioning systems (HVAC), Heating, ventilation, and air conditioning systems (HVAC), Polymers
Read More >>

High-Voltage Supercapacitors for Improved Energy Density Hybrid Power Sources

Both the aerospace and automotive industries depend increasingly on electrochemical energy storage. Reduction in mass, increase in energy, and increase in power can benefit both of these areas dramatically. Supercapacitors are currently under consideration for use in both hybrid electric vehicles (HEV) and electric vehicles (EV) to improve delivery of power (due to their high rate capability), improve the life of the lithium-ion batteries (due to their ability to buffer the detrimental effects of high current pulses or alternating currents on the battery), and implement more efficient capture of regenerative breaking energy (due to their excellent charge acceptance at high rates).

Posted in: Briefs, Energy, Energy storage systems, Lithium-ion batteries, Ultracapacitors and supercapacitors, Energy storage systems, Lithium-ion batteries, Ultracapacitors and supercapacitors, Electric vehicles, Hybrid electric vehicles
Read More >>

Fuel Cell Power Management

This technique produces multiple voltages simultaneously from a single fuel cell stack, without the need for converters.

An innovation from NASA Glenn Research Center increases the efficiency and versatility of fuel cell stacks for power generation. To meet the requirements of a fuel cell system, engineers have typically added direct-current-to-direct-current (DC-to-DC) converters that reduce the voltage produced at the ends of the fuel cell stack. This smaller voltage is then used to operate the valves, pumps, heaters, and electronics that make up the fuel cell system. However, adding DC-to-DC converters increases cost, reduces efficiency, adds to the system part count (which reduces reliability), and increases both the mass and volume of the fuel cell system. NASA's innovative technique features multiple power points that connect different numbers of cells in an electrical series, allowing the fuel cell stack to produce electrical power at multiple DC voltages simultaneously. This capability eliminates DC-to-DC converter electronics, thereby reducing cost and simplifying the system.

Posted in: Briefs, Energy, Voltage regulators, Voltage regulators, Electric power, Fuel cells
Read More >>

Solid-State Lithium Sulfur Battery

Applications include electric vehicles, consumer electronics, UAVs, and wind and solar energy storage.

Sulfur is a promising cathode for lithium batteries due to its high theoretical specific capacity (1673 mAh/g), low cost, and environmental friendliness. With a high specific energy density of 2500 Wh/kg, which is a five times greater energy density than a conventional Li-ion battery, Li-S batteries hold great potential for next-generation high-energy storage systems. However, wide-scale commercial use has been limited because some key challenges, such as the dissolution of the intermediate discharge product (Li2Sx, 2<X<8) in conventional liquid electrolytes, remain unsolved. On the other hand, all-solid-state batteries (SSBs) are considered to be the ultimate power supply for pure electric vehicles (EVs). SSB systems demonstrate a new approach for novel Li-S batteries. Replacing the organic electrolyte with solid-state electrolytes (SSEs) will intrinsically eliminate the dissolution of polysulfide. However, all of the solidstate Li-S batteries incorporating current state-of-the-art SSEs suffer from high interfacial impedance due to their low surface area.

Posted in: Briefs, Energy, Battery cell chemistry, Lithium-ion batteries, Battery cell chemistry, Lithium-ion batteries, Electrolytes, Electric vehicles
Read More >>

Standardized Heating Method to Trigger and Prevent Thermal Runaway Propagation in Lithium-Ion Batteries

Lithium-ion (Li-ion) cells are increasingly used in high-voltage and high-capacity modules. The Li-ion chemistry has the highest energy density of all rechargeable battery chemistries, but associated with that energy is the issue of catastrophic thermal runaway with a fire. With recent incidents in the commercial aerospace and electronics sectors, methods are required to prevent cell-to-cell thermal runaway propagation. The goal of this work was to achieve a common method for triggering a single cell in a Li-ion battery module into thermal runaway, determine if one can consistently obtain this thermal runaway event, and design mitigation measures to address propagation of the thermal runaway to other cells in the module.

Posted in: Briefs, Energy, Battery cell chemistry, Lithium-ion batteries, Battery cell chemistry, Lithium-ion batteries, Fire prevention, Risk assessments
Read More >>

Researchers Advance Printable Solar Cell Possibilities

By finding a new way to manufacture low-cost perovskite solar cells, a team at the University of Toronto believes that making solar cells could someday be as easy and inexpensive as printing a newspaper. The researchers' alternative solar technology supports the development of low-cost, printable solar panels capable of turning nearly any surface into a power generator.

Posted in: News, Solar Power
Read More >>

Will "$100-per-killowatt-hours" batteries boost wind and solar energy efforts?

This week’s Question: The Department of Energy (DOE) has set a goal of building a battery that stores energy for less than $100 per kilowatt-hour, making stored wind and solar energy competitive with energy produced from traditional power plants. Today’s lead INSIDER story featured a new flow battery that offers the potential to significantly decrease the costs of production. "If you can get anywhere near this cost target then you change the world," said researcher Michael Aziz. "It becomes cost effective to put batteries in so many places. This research puts us one step closer to reaching that target." What do you think? Will "$100-per-killowatt-hours" batteries boost wind and solar energy efforts?

Posted in: Question of the Week, Energy, Energy Storage
Read More >>

The U.S. Government does not endorse any commercial product, process, or activity identified on this web site.