Manufacturing & Prototyping

Growth Method for Chalcongenide Phase-Change Nanostructures

Nanometer-scale materials can provide smaller devices than those currently available.

Recently, one-dimensional (1-D) nanostructures, such as nanowires and nanotubes, have become the focal point of research in nanotechnology due to their fascinating properties. These properties are intrinsically associated with low dimensionality and small diameters, which may lead to unique applications in various nanoscale devices. It is generally accepted that 1-D nanostructures provide an excellent test ground for understanding the dependence of physical, electrical, thermal, optical, and mechanical properties on material dimensionality and physical size. In particular, 1-D semiconductor nanostructures, which exhibit different properties as compared with their bulk or thin film counterparts, have shown great potential in future nanoelectronics applications in data storage, computing, and sensing devices.

Posted in: Briefs, Manufacturing & Prototyping, Nanomaterials
Read More >>

ELID Grinding of Large Aspheres

This work focused on a manufacturing process to produce silicon carbide optical surfaces with low mid-spatial surface errors. Mid-spatial frequency (MSF) and high-spatial frequency (HSF) surface errors in the grinding of fast aspheres are amplified in hard ceramics like silicon carbide due to cyclic tool wear rates, vibration, and tool deformation.

Posted in: Briefs, Manufacturing & Prototyping, Manufacturing equipment and machinery, Manufacturing processes, Ceramics
Read More >>

Highly Aligned Electrospun Fibers and Mats

These mats have applications in fuel and solar cells, smart textiles, and in wound dressings and tissue engineering scaffolds.

A modified electrospinning apparatus has been created for spinning highly aligned polymer fibers. Fiber placement, orientation, and porosity are difficult to control using conventional electrospinning apparatus. Conventional electrospinning creates randomly oriented fibers that are well suited to nonwoven mats, but not to other applications. This new technology will broaden the range of engineering applications of electrospun materials. The apparatus provides a simple and inexpensive means of producing fibers and mats of controlled fiber diameter, porosity, and thickness.

Posted in: Briefs, Manufacturing & Prototyping, Fuel cells, Fibers, Polymers, Textiles
Read More >>

Solar Panel and System Design to Reduce Heating and Optimize Corridors for Lower-Risk Planetary Aerobraking

New approach features aggressive load reduction to reduce risk.

This innovation presents a spacecraft aerobraking approach that reduces heating and optimizes corridors, which reduces overall risk. This is accomplished by combining solar panel aspect ratio and edge features with simple spacecraft packaging optimization and integrated thermal-analysis techniques that also allow specifying a more benign temperature corridor.

Posted in: Briefs, TSP, Manufacturing & Prototyping, Braking systems, Thermal management, Thermal management, Spacecraft
Read More >>

Low-Cost, Very Large Diamond-Turned Metal Mirror

Reliable plating and diamond-turning technologies produce visible quality mirrors for applications such as semiconductor manufacturing.

This innovation is a method for fabricating a low-cost, lightweight, large-aperture mirror by constructing only the mirror substrate by electroforming on a master form machined from plastic foam. Electroformed tubes of the same NiP alloy are installed in the foam mirror substrate master. Installing electroformed NiP tubes in the plastic mirror master before plating on the plastic foam mirror substrate allows the mirror faceplate and the back surface of the mirror to be plated onto the ends of the connecting tubes in the foam plastic. Removal of the foam after plating is complete results in a very stiff and lightweight mirror substrate made only of a single material. The low cost of the electroformed mirror substrate is made possible by very fast production of a master surface made of plastic foam that can be rapidly machined with modern, high-speed machining technology to very good mechanical tolerances in only a few hours.

Posted in: Briefs, Manufacturing & Prototyping, Optics, Optics, Metal finishing, Plating
Read More >>

Very-High-Load-Capacity Air Bearing Spindle for Large Diamond Turning Machines

Large-load-capacity oil hydrostatic bearings generate prohibitive amounts of heat in large sizes when run at speeds useful for diamond turning of optical components. The viscosity of air is more than three orders of magnitude less than the thinnest oil; therefore, the frictional heating of large-diameter air bearings is very small and very manageable. A formidable manufacturing problem with large air bearings is that the extremely low viscosity of air requires that the thickness of the bearing film is also very small. This very small bearing clearance of 5–8 micrometers means that the required accuracy of geometry and dimensions of air bearing components is extremely difficult to achieve.

Posted in: Briefs, Manufacturing & Prototyping, Optics, Optics, Manufacturing equipment and machinery, Turning
Read More >>

Tailored 3D Fiber Architecture to Improve CVI Processing

An improvement has been made to the infiltration of 3D woven and 3D braided preforms that will lead to the manufacture of CMC (ceramic matrix composite) and C–C (carbon-carbon) composites based on 3D fiber architectures that have low residual porosity and smaller void sizes. Tailoring the fiber architectures by the use of several combinations of larger and smaller warp, fill, and z yarns formed pathways into the thickness of the fabrics to improve fluid flow through the preform during CVI (chemical vapor infiltration) processing.

Posted in: Briefs, Manufacturing & Prototyping, CAD / CAM / CAE, CAD, CAM, and CAE, Ceramics, Composite materials, Fabrics, Fibers
Read More >>

3D Microwave Print Head System for Melting Materials

This approach has applications in industry where solid materials need to be melted.

There is a need to develop an efficient method for processing lunar regolith in support of future missions to colonize the Moon. A system for heating lunar regolith (“moon soil”) using microwaves for processing has been developed. It relies on an enhanced heating effect based on a large temperature gradient forming when a sample of lunar regolith under microwave radiation emits heat from its surface rapidly as the core is melting. Once the core melts, the sample absorbs microwave energy more readily. This molten lunar regolith would then exit the sample tube, and the lunar regolith could then be introduced into molds for forming a desired structure or building block.

Posted in: Briefs, Manufacturing & Prototyping, Product development, Test equipment and instrumentation
Read More >>

Novel Chemistry for Deposition of MgF2 Thin Films

Magnesium fluoride (MgF2) thin films are useful for many different optics applications. In particular, they are useful for ultraviolet anti-reflective and protective coatings. However, in the far UV, one needs a very small, controllable amount of material to get the best optical performance. That is difficult to achieve with conventional methods. Atomic layer deposition (ALD) is an ideal UV-compatible thin-film deposition technique due to its ability to deposit uniform, pin-hole free films with angstrom-level thickness control. Therefore, it is an ideal technique to use to deposit protective thin films in the 2-nm thickness range. However, conventional ALD-MgF2 reactions are very unpredictable due to the low reactivity and volatility of the precursors.

Posted in: Briefs, TSP, Manufacturing & Prototyping, Optics, Optics, Coatings Colorants and Finishes, Coatings, colorants, and finishes
Read More >>

Self-Aligning Lug for Adapting Carbon Fiber Rods to a Bolted Metallic Connection

Joint strength is controlled through precise bond line control.

The enormous strength of unidirectional carbon fiber composite rods is difficult to take advantage of at their ends because of inadequate joining technology. Bolting does not work with unidirectional composites, and bonding is difficult due to stiffness mismatches between the metallic and composite connections. Ideally, a thick bond is desired so that the relatively softer adhesive can shear and distribute shear stresses instead of peaking at the ends of the bond. Thick bonds are difficult to obtain and repeatedly control with conventional methods of beads, bonding wire, shim, or tooling. Most of these methods control the minimum thickness of the bond, but do not control the maximum thickness. In addition, traditional joint types such as lap, strap, and scarf are not ideal for this application.

Posted in: Briefs, TSP, Manufacturing & Prototyping, Composite materials, Fittings
Read More >>

The U.S. Government does not endorse any commercial product, process, or activity identified on this web site.