Manufacturing & Prototyping

Silicone & Thermoplastic Extrusion

When precision matters, FMI and MEDRON delivers.

When you have high-quality silicone and thermoplastic extrusion tubing requirements, we understand your high performance expectations. From simple ID / OD tubing to multi-lumen extrusion with tight tolerances, FMI and MEDRON are well-positioned to handle it all. Our robust quality system and state-of-the-art equipment ensure the highest quality, while our closed-loop control system allows for in-line statistical process control (SPC) and efficient processing. As always, we work as your partner every step of the way — leveraging our deep expertise in medical contract manufacturing to meet your specific needs.

Posted in: White Papers, Manufacturing & Prototyping, Rapid Prototyping & Tooling, Materials, Plastics, Bio-Medical, Medical, Tubing/Extrusion/Molding
Read More >>

Connecting the Unconnected: Evolving Manufacturing Connectivity, Part I - Challenges to Brownfield Development

Learn about common obstacles encountered on the road to connected manufacturing, and preview some solutions provided by ADLINK and Intel. Cisco estimates that 92% of the 64 million manufacturing machines in worldwide operation are unconnected to any network, despite remaining in full use on production lines everywhere. To prevent considerable costs being incurred, viable optimization of existing machines embodies connection to the Internet, effectively integrating them into Smart Factory systems while maximizing acquisition and analysis of operational data, all within acceptable cost constraints.

Posted in: White Papers, Manufacturing & Prototyping, Test & Measurement
Read More >>

New SAE Standards on Additive Manufacturing: World’s First for Aerospace Industry

Industry standards play an important role in helping the public by ensuring quality and consistency in the products produced for the marketplace. The emerging field of additive manufacturing (AM) enables parts to be printed in 3D from electronic files created on a computer. These parts are being used in critical applications such as aircraft engines. It is imperative that these parts be manufactured and tested to the strictest standards. SAE International has created the Aerospace Material Specification committee on Additive Manufacturing (AMS-AM). The FAA provided SAE with a task request in support of the formation of a standards committee to develop aerospace material specifications and other related documents that would assist the FAA in developing guidance material for AM certification — certification of parts for use on aircraft such as parts for commercial jets that carry passengers over large bodies of water where there is no room for error or inferior quality.

Posted in: White Papers, Manufacturing & Prototyping
Read More >>

Core Competencies Staying Competitive in the Medical Device Industry

Outsourcing helps medical companies fill proficiency gaps and keep pace with innovation. This whitepaper explains what factors are driving the growth in the medical device industry, and how these market dynamics have led to an increased demand for outsourcing of noncore OEM competencies and processes to reliable partners. It will present the many ways outsourcing can help OEMs minimize technology investments and integration efforts to accelerate time-to-market and increase their ROI. The attributes required in an ideal outsourcing partner are also discussed.

Posted in: White Papers, White Papers, Electronics, Custom & Contract Manufacturing, Manufacturing & Prototyping, Medical
Read More >>

Improving Corrosion Resistance of 303 Stainless Steel

Able Electropolishing, a leader in the electropolishing industry, teamed up with Swiss Precision Machining Inc., to test the effectiveness of passivation vs. electropolishing on corrosion resistance of machined 303 stainless steel components.

Posted in: White Papers, Green Design & Manufacturing, Manufacturing & Prototyping, Coatings & Adhesives, Materials
Read More >>

ABLE TECHNICAL GUIDE: Your Solution to 7 Metal Surface Problems

Electropolishing is often referred to as a “reverse plating” process. Electrochemical in nature, electropolishing uses a combination of rectified current and a blended chemical electrolyte bath to remove flaws from the surface of a metal part.

Posted in: White Papers, Manufacturing & Prototyping, Coatings & Adhesives, Materials, Test & Measurement
Read More >>

Taking Manufacturing Control By Force

In today's data-driven world, there's no such thing as having too much information. From a product manufacturer's perspective, there are countless variables that can impact their production process. Among these variables are changes in force, where the slightest contact can make a major impact on efficiency and quality.

Posted in: White Papers, Manufacturing & Prototyping, Automation, Robotics, Sensors
Read More >>

Three Things Medical Device Designers Need to Know About UVC LEDs

The global infection control market is projected to reach $22 billion by 2022 with disinfection products, which would include UVC devices, representing the largest growth segment. UVC LEDs offer medical equipment designers an exciting new way to develop hand-held or portable disinfection devices to greatly enhance HAI prevention in a wide range of healthcare applications. Importantly, the design and operating flexibility of UVC LEDs means that these devices could be used during routine daily patient management and not limited to empty terminal room events.

Posted in: White Papers, White Papers, Manufacturing & Prototyping, Medical
Read More >>

How Metal 3D Printing is Redefining Part Design

It's one of the basic rules of manufacturing: As part complexity increases, so do machining and assembly costs. But what if there were a different way to produce metal parts — one with fewer limitations than traditional milling, turning, and grinding processes, and able to build complex parts in less time and with little human intervention?

Posted in: Articles, Manufacturing & Prototyping, Additive manufacturing, Machining processes, Metals, Parts
Read More >>

Get Optical Products to Market Faster Using Modern Virtual Prototyping

Companies developing cutting-edge lasers, optics, and imaging products face significant hurdles getting products to market ahead of competitors. Learn about a new way for optical and mechanical engineers to collaborate that’s changing the way leading companies develop optical products. Learn:

Posted in: White Papers, Imaging, Manufacturing & Prototyping, Lasers & Laser Systems, Optics
Read More >>

The U.S. Government does not endorse any commercial product, process, or activity identified on this web site.