Test & Measurement

Strain Gage for Highly Elastic, Low-Modulus Materials

This gage surpasses conventional foil technology, measuring elastic strain range greater than 100 percent while reducing measurement error.

Researchers at NASA’s Armstrong Flight Research Center have developed and tested a new strain gage that makes significant strides in the state of the art, particularly salient given the requirements of new structural components on aerospace vehicles. Conventional foil technology presents a significant shortcoming for these vehicles, since it is limited to less than 20 percent strains while newer vehicles include highly elastic, low-Young’s-modulus materials that require higher strain measurements. For example, fabric-reinforced rubbers and elastomers have a nonlinear stressstrain relationship with extreme rupture strains — some greater than 500 percent.

Posted in: Briefs, Test & Measurement, Elastomers, Materials properties
Read More >>

Considerations for Choosing Temperature Measurement Devices

Temperature is the physical variable most often measured in industrial processes. Selecting the sensor and measurement device to match a specific process is extremely important, and knowing the various options is the first step to optimizing temperature measurement.

There are a variety of reasons we need to know the temperature of an object or a process — to prevent product damage, ensure sterilization, determine biological health, ensure mixture blending, control chemical reactions, or ensure drying, curing, and outgassing, to name just a few. Temperature measurement can also be a regulatory requirement; for example, the Food and Drug Administration (FDA) requires temperature monitoring of food and drug products.

Posted in: Articles, Test & Measurement, Measurements, Test equipment and instrumentation, Thermal testing
Read More >>

Improved Detection of Kidney Stones Using S-mode Ultrasound

Steps were developed to improve kidney stone detection relative to surrounding tissue.

Ultrasound has been a useful tool in the detection of kidney stones. It is a low-cost solution that does not require ionizing radiation that would be harmful to vulnerable populations such as children and recurrent stone formers. However, it suffers from a broad range of sensitivity (78 to 96%) and specificity (31 to 100%) in the detection of stones.

Posted in: Briefs, Test & Measurement, Imaging, Imaging and visualization, Imaging, Imaging and visualization, Children, Diagnosis, Diseases, Medical equipment and supplies
Read More >>

Vector Network Analyzer Calibration for Quasi-Optical Dual Ports

It is desirable to measure the electromagnetic properties of devices and materials in the millimeter part of the spectrum. For guided wave-based devices and materials (waveguides, coaxial devices), a vector network analyzer (VNA) is an excellent tool for this purpose since it provides full reflection and transmission characterization at high precision.

Posted in: Briefs, TSP, Test & Measurement, Calibration, Electromagnetic compatibility, Waveguides, Electromagnetic compatibility, Waveguides, Materials properties, Test equipment and instrumentation
Read More >>

Measurement of the Mechanical Properties of Thin Film Polymers at Cryogenic Temperatures

A new apparatus uses pressurized liquid nitrogen to measure deformation.

The measurement of structural properties of materials at cryogenic temperatures is a daunting task. The measurement of thin films at low temperatures is even harder. Current practices of immersing the material in a cryogenic fluid and then removing and testing it does not work due to the rapid warming of the low-mass thin film. Similarly, exposing it to a cold vapor environment, unless well controlled procedurally, does not yield data at a known temperature (the temperature of the material is unknown). Thus, gathering basic material properties of thin film materials at low temperature requires a new approach.

Posted in: Briefs, Test & Measurement, Measurements, Materials properties, Polymers, Test procedures
Read More >>

Estimation of Algae Growth Stage, Growth Rate, and Lipid Content

Applications include diesel fuel production, renewable energy, biofuels, and pharmaceuticals.

This invention provides a method using light of different wavelengths to estimate freshwater and marine algae growth stage and algae growth rates as well as lipid content in standard media. Light absorption by the algae is measured for a specified light intensity in each of two or more narrow wavelength ranges, correcting for absorption in the medium without algae. The net light absorption is compared with a reference set of absorption values for the algae at different growth stages.

Posted in: Briefs, Test & Measurement, Measurements, Biomaterials, Materials properties, Test procedures, Marine vehicles and equipment
Read More >>

Isotopic Biomarkers for Rapid Assessment of Bone Mineral Balance in Biomedical Applications

Advanced isotope tracer techniques are explored.

Development of new treatments for metabolic bone disease, and evaluation of the effectiveness of existing therapies in individual patients, are severely hampered by the lack of any reliable tool for quickly measuring changes in bone mineral balance in response to treatment. A new tracerless calcium isotope biomarker of bone mineral balance fills this need. When properly applied, the calcium isotope biomarker reveals changes in bone mineral balance with unprecedented speed and detail, and has the potential to dramatically improve the treatment for diseases such as osteoporosis. A complementary strontium isotope biomarker provides, with equal rapidity, information on the speed of exchange of calcium between soft tissue and mineralized compartments.

Posted in: Briefs, Test & Measurement, Measurements, Biological sciences, Diseases, Medical equipment and supplies, Calcium
Read More >>

Optically Modulated Miniature Magnetometer

This instrument may replace two separate instruments that are often needed together to study magnetic fields.

The optically modulated miniature magnetometer (OMMM) is intended to replace two separate instruments (each with their respective mass and power allotments) that are commonly needed together for scientific studies of magnetic fields — a triaxial fluxgate vector magnetometer and an optically pumped alkali vapor scalar magnetometer. For all vector instruments, the scalar data is necessary for calibrating the vector data.

Posted in: Briefs, TSP, Test & Measurement, Optics, Optics, Magnetic materials, Test equipment and instrumentation
Read More >>

Every Measurement Starts with a Trigger

As today’s products in consumer electronics, automotive, and aerospace applications get more complex with every generation, the requirements on test instruments increase even more because test capabilities need to advance, while test times and time-to-market are expected to decrease.

One important requirement for instruments like oscilloscopes is the ability to detect and trigger on an event of interest within a stream of unsuspicious signals fast and reliably. The quicker a specific event can be detected, the faster a problem in an electronic design can be debugged, reducing development and manufacturing test times.

Posted in: Articles, Test & Measurement, Measurements, Oscilloscopes, Oscilloscopes, Test equipment and instrumentation
Read More >>

Using Hardware Handshaking to Reduce ATE Test Times

Developing an automatic test equipment (ATE) system takes time, and there can be different approaches to achieve the same goal. Without the right approach, the system can become less efficient, contributing to more time spent or more resources used to complete the task.

With advances in technology, ATE systems are becoming more widely used across a range of industries including manufacturing, avionics, aerospace, military, and defense. ATE systems are efficient and can be incredibly useful, allowing quick and accurate testing that communicates across a set of devices. However, it can become a complicated task to properly set up an ATE system to achieve the user’s desired outcomes.

Posted in: Articles, Test & Measurement, Calibration, Data exchange, Data exchange, Performance tests, Test equipment and instrumentation
Read More >>

The U.S. Government does not endorse any commercial product, process, or activity identified on this web site.