Test & Measurement

Split Laser System for Environmental Monitoring

Environmental monitoring — the assessment of air, water, and soil quality — is highly important to oil and gas exploration companies, landowners, regulatory agencies, municipalities, and any organization measuring emissions and pollutants. The majority of monitoring technologies, however, are expensive and labor intensive, often requiring sample collection and preparation (i.e., external lab analysis) that can dramatically alter the sample and its inherent components. Of those technologies that do allow for in-situ analysis, few are amenable to measurements under harsh conditions, such as high temperature and/or pressure.

Posted in: Briefs, Test & Measurement, Lasers, Lasers, Environmental testing, Test equipment and instrumentation, Test procedures

Measuring Tiny Forces with Light

Photons have no mass, but they have momentum. This allows researchers to use light to push matter around. Scientists at the Physical Measurement Laboratory (PML) at the National Institute of Standards and Technology (NIST) have taken advantage of this property to develop devices that can create and measure minute forces, an area traditionally underserved by the metrology community.

Posted in: Briefs, Test & Measurement, Measurements, Materials properties, Test equipment and instrumentation, Test procedures

Laser Scanning Technique for Testing Fire-Damaged Concrete

Research at The University of Nottingham (UK) and the University at Ningbo (China) has found that laser scanning is a viable structural safety technique to detect the damaging effects of fire on concrete. Concrete is the most extensively used construction material worldwide with an average global yearly consumption of 1 cubic meter per person. Fire is one of the most serious potential risks to concrete structures such as bridges, tunnels, and buildings.

Posted in: Briefs, Test & Measurement, Lasers, Lasers, Materials properties, Fire, Risk assessments, Safety testing and procedures

3D Measurement and Visualization of Displacement and Strain Fields

The Naval Research Laboratory (NRL) has developed a metrology workbench for the measurement and visualization of displacement and strain fields in three dimensions. The workbench uses two or more cameras to image a specimen, and includes custom software that implements the 3D Meshless Random Grid method.

Posted in: Briefs, Test & Measurement, Finite element analysis, Computer software / hardware, Computer software and hardware, Optics, Computer software / hardware, Computer software and hardware, Optics, Test equipment and instrumentation

Eddy Current Probe for Surface and Sub-Surface Inspection

This technology can be used in aerospace, manufacturing, materials, and energy applications.

NASA's Langley Research Center has developed a novel probe for eddy current sensor applications that improves detection depth and measurement resolution. Although the use of anisotropic magnetoresistive (AMR) sensors in eddy current probes to improve sensitivity at low frequencies and increase the detection depth is known, the high-frequency sensitivity and small size of these sensors is less explored. This new probe incorporates two induction sources (i.e., one high-frequency and one low-frequency) and an AMR sensor; the result is improved resolution in near-surface material characterization, combined with simultaneous deep-flaw detection. Addition of a second high-frequency induction source, oriented to produce a magnetic field orthogonal to the first, allows for near-surface anomaly detection in two dimensions.

Posted in: Briefs, Sensors, Measuring Instruments, Test & Measurement, Computational fluid dynamics, Sensors and actuators, Sensors and actuators, Inspections

Understanding Connected Car Testing

As the automotive industry cruises towards Advanced Driver Assistance Systems (ADAS), autonomous vehicles and thus the integration of communications technology, test and measurement becomes a critical component in the journey.

Posted in: White Papers, Automotive, Communications, Wireless, Test & Measurement

Selecting the Right Material for 3D Printing

Materials must be suited to the application in order to have successful results. The properties of any material become increasingly important as a product progresses from concept and functional prototyping to production.

Posted in: White Papers, Electronics, Manufacturing & Prototyping, Test & Measurement

Hydraulic Carts Streamline Structural Tests for Aircraft

The Flight Loads Laboratory (FLL) at Armstrong Flight Research Center tests the strength and endurance of aircraft structures using hydraulic actuators to apply forces that simulate the stresses of takeoff, flight, and landing. The contract to build the FLL’s next-generation hydraulic controller system went to Moog Inc., an East Aurora, NY-based company that specializes in motion control systems. The company designed a multi-function mobile cart that not only houses the hydraulics for up to eight actuators, but also includes most of the necessary electronics, which were previously housed in the control room.

Posted in: News, Aerospace, Test & Measurement

Automotive Radar Sensors - RF Signal Analysis and Inference Tests

This Application Note addresses signal measurements and analysis of automotive radars that are crucial during the development and verification stages. It also shows a setup to verify the functionality of a radar in case of radio interference.

Posted in: White Papers, Automotive, Test & Measurement

Time-to-Digital Converter

Mouser Electronics, Inc., (Mansfield, TX) is now stocking the TDC7201 time-to-digital converter from Texas Instruments (TI). The TDC7201 is designed for use with ultrasonic, laser, and radar range finding equipment using time-of-flight (TOF) technique. TI’s TDC7201 time-to-digital converter has two built-in time-to-digital converters (TDCs) that can be used to measure distance down to 4 cm and up to several kilometers using a simple architecture. The TDC7201 features a wide measurement range of 0.25 ns to 8 ms and high accuracy of 28 ps. The device has a single shot resolution of 55 ps, (equivalent to 0.825 cm).

Posted in: Products, Products, Data Acquisition, Measuring Instruments

The U.S. Government does not endorse any commercial product, process, or activity identified on this web site.