Test & Measurement

Guide to Electrical Safety Testing

Our safety testing guide is the definitive resource for test operators, engineers and managers looking to learn more about electrical safety testing. Use this guide to help create a safe testing station, learn about the benefits of electrical safety testing your products, and understand the different tests and their applications. This is the ideal place to start if you’re unfamiliar with any aspect of electrical safety testing.

Posted in: White Papers, Test & Measurement
Read More >>

Simulation, Development, and Field Measurement Validation of an Isolation System for a New Electronics Cabinet in the Space Shuttle Launch Environment Within the Mobile Launch Platform

Selecting the proper vibration isolation system is crucial for aerospace engineers. Without it, a structure can be seriously compromised – or worse, destroyed.

Posted in: White Papers, Aerospace, Test & Measurement
Read More >>

Flexibility in Low-Cost Microphone Array Systems

As more and more production items are required to comply with a variety of environmental standards, noise control is increasingly key to successful market placement. Effective control of testing costs is equally as critical as deployment of the systems themselves. The ADLINK's fully modular solution provides flexible configuration based on actual demand, while substantially reducing implementation costs, for highly efficient and precise measurement with minimal investment.

Posted in: White Papers, Test & Measurement
Read More >>

Connecting the Unconnected: Evolving Manufacturing Connectivity, Part I - Challenges to Brownfield Development

Learn about common obstacles encountered on the road to connected manufacturing, and preview some solutions provided by ADLINK and Intel. Cisco estimates that 92% of the 64 million manufacturing machines in worldwide operation are unconnected to any network, despite remaining in full use on production lines everywhere. To prevent considerable costs being incurred, viable optimization of existing machines embodies connection to the Internet, effectively integrating them into Smart Factory systems while maximizing acquisition and analysis of operational data, all within acceptable cost constraints.

Posted in: White Papers, Manufacturing & Prototyping, Test & Measurement
Read More >>

ABLE TECHNICAL GUIDE: Your Solution to 7 Metal Surface Problems

Electropolishing is often referred to as a “reverse plating” process. Electrochemical in nature, electropolishing uses a combination of rectified current and a blended chemical electrolyte bath to remove flaws from the surface of a metal part.

Posted in: White Papers, Manufacturing & Prototyping, Coatings & Adhesives, Materials, Test & Measurement
Read More >>

Overcome Connected Car Design and Test Challenges

Today, radar systems, such as adaptive cruise control, stop-and-go, blind spot detection, lane change assist, and rear crash warning, are being developed and integrated into automobiles to reduce possible collisions and prevent human casualties. Engineers are choosing the SystemVue Scenario Framework solution to increase design fidelity and save costs during design and test. Learn more by downloading the application note, Automotive FMCW Radar System Design Using 3D Framework for Scenario Modeling.

Posted in: White Papers, Automotive, Electronics & Computers, Test & Measurement
Read More >>

Modern Measurement Tools Information at Your Fingertips

It takes the right tools to perform a job well, so having the right set of test instruments and software on your bench is critical to ensuring your design meets all its requirements. It also takes having the right information available to you when you need it. Keysight Technologies has both a comprehensive library of information, and the broadest portfolio of bench solutions, fully equipped with capability that will safeguard you from overlooking critical measurements and analysis that could cause your end-product to fail in its intended market. So, whether your needs include understanding the power consumption of your device, providing clean dc and ac power, component characterizing, data acquisition, analyzing digital designs, software to automate your tests, or generating/visualizing waveforms, Keysight has essential bench solutions for your needs. Get the most benefit from your Keysight instruments with application notes, tips, product information and more – right at your fingertips.

Get your measurement resources

Posted in: White Papers, Electronics & Computers, Test & Measurement
Read More >>

Architectures for Implementing a Hardware-in-the-Loop System

Safety, availability, or cost considerations can make it impractical to perform all the necessary tests with the complete embedded control system. Using hardware-in-the-loop (HIL) simulation, you can simulate the parts of the system that pose these challenges. By thoroughly testing the embedded control device in a virtual environment before proceeding to real-world tests of the complete system, you can maintain reliability and time-to-market requirements in a cost-effective manner even as the systems you are testing become more complex. Download this whitepaper to find out more about implement a HIL system into your test environment.

Posted in: White Papers, Automotive, Electronics & Computers, Test & Measurement
Read More >>

Fabrication of Freeform Optics

Freeform surfaces on optical components have become an important design tool for optical designers. Non-rotationally symmetric optical surfaces have made solving complex optical problems easier. The manufacturing and testing of these surfaces has been the technical hurdle in freeform optic’s wide-spread use. Computer Numerically Controlled (CNC) optics manufacturing technology has made the fabrication of optical components more deterministic and streamlined for traditional optics and aspheres. Optimax has developed a robust freeform optical fabrication CNC process that includes generation, high speed VIBE polishing, sub-aperture figure correction, surface smoothing and testing of freeform surfaces. Metrology of freeform surface is currently achieved with coordinate measurement machines (CMM) for lower resolution and interferometry with computer generated holograms (CGH) for high resolution irregularity measurements.

Posted in: White Papers, Imaging, Optics, Photonics, Test & Measurement
Read More >>

Six Axes of Calibration

In a system or on a lab bench, proper instrument calibration reduces the chances of false test results. Not all calibrations are equal, and six key factors affect quality, usefulness and cost. In Six Axes of Calibration, we highlight the importance and value of each factor. Download application note.

Posted in: White Papers, RF & Microwave Electronics, Instrumentation, Test & Measurement
Read More >>

The U.S. Government does not endorse any commercial product, process, or activity identified on this web site.