Webcasts

Fast-Tracking ADAS and Autonomous Vehicle Development with Simulation

In Conjunction with SAE

Developing Advanced Driver Assistance Systems (ADAS) and autonomous vehicles is a challenge without precedent. Whole new engineering fields – such as artificial intelligence – need to be developed, yet time-to-market is short with intense competition. Estimates indicate that billions of miles of road testing will be necessary to ensure safety and reliability of ADAS and autonomous vehicles. This impossible task can only be accomplished with the help of engineering simulation. With simulation, thousands of driving scenarios and design parameters can be virtually tested with precision, speed, and cost economy.

Posted in: On-Demand Webinars, Automation
Read More >>

Thermal Management Solutions for Medical Devices

Designers for powered medical devices are facing many new challenges. Devices are becoming smaller and more powerful, which is good, but certainly creates thermal management issues. If these devices get too hot, there can be safety issues for both the care giver and patient. Moreover, overheated devices can perform poorly or not all.

Posted in: Webinars, On-Demand Webinars, Medical
Read More >>

The Evolution of ADAS: Testing Systems That Include Cameras, Radar, and Sensor Fusion

In Conjunction with SAE

On their own, test requirements for camera and radar technology are rapidly changing as they become more safety critical. Because these systems are increasingly reliant on sensor fusion techniques, the test requirements are growing even more complex at a fast rate. A test system built on a scalable and flexible architecture is the only way to make sure you can adapt as quickly as ADAS technologies and autonomous vehicle systems are evolving.

Posted in: On-Demand Webinars, Cameras, Test & Measurement
Read More >>

The Innovative Future of Brazing

Join Morgan Advanced Materials for a 30-minute Webinar to learn more about new innovations in brazing technology.

Posted in: On-Demand Webinars, Materials
Read More >>

Virtual Hardware ECU: How to Significantly Increase Testing Throughput

In Conjunction with SAE

Both the complexity and software content of automotive electronic systems are increasing rapidly. At the same time, the demand for more software and system testing is growing. This need is being driven by requirements from the ISO 26262 standard and the necessity to reduce software-driven recalls, which have been significantly rising over the past few years.

Posted in: On-Demand Webinars, Electronics
Read More >>

Connectivity Solutions - Keeping Pace with the Rapid Evolution of Embedded Computing Systems

Embedded Computing is seeing a rapid evolution in system design. New defense platforms and system upgrades are widely adopting open architecture standards like VPX in place of 20+ year old technologies. Defense-grade processors are now achieving 28Gbps data rates with significant I/O count, which drives increased functionality and enables computing hardware to shrink in size and weight.

Posted in: On-Demand Webinars, Defense, Electronics & Computers
Read More >>

High-Throughput Multiphysics and Multiscale Simulations in COMSOL®

If you want to learn about high-throughput multiphysics and multiscale simulations, then tune into this webinar with guest speaker Ed Furlani from the University at Buffalo.

Posted in: On-Demand Webinars, Software
Read More >>

Inside the Cockpit: How TE brings Fighter Jet Technology to Race Cars

Racing cars are a really tough environment. A racing car that’s comfortable for the driver is a slow car, so niceties like suspension travel get sacrificed for speed. However, that means all the other parts on the car have to withstand this environment. As weight is a critical element, the challenge is to make products smaller and lighter, but able to withstand vibration and heat.

Posted in: On-Demand Webinars, Automotive
Read More >>

Top 3 Myths of Injection Molding

Rapid injection molding has changed the way product developers and design engineers use manufacturing. No longer is injection molding limited to traditional methods that are time consuming, expensive, and only ideal for larger part quantities. Over the last decade, manufacturing has evolved to allow low volumes of molded parts within days, and do so at a fraction of the traditional tooling cost.

Posted in: On-Demand Webinars, Manufacturing & Prototyping
Read More >>

Transmission Solutions to Optimize Future Powertrain Efficiency

In Conjunction with SAE

This 30-minute Webinar explores an innovative technology that delivers a continuously variable transmission (CVT) without the traditional limitations. Eliminating the belts and pulleys used in conventional CVTs, the technology features a unique planetary coaxial configuration that enables more than 300 transmission configuration possibilities, improving fuel economy by 5-10 percent.

Posted in: On-Demand Webinars, Energy Efficiency
Read More >>

The U.S. Government does not endorse any commercial product, process, or activity identified on this web site.