Webcasts

Joe Munchak, Research Meteorologist, Goddard Space Flight Center, Greenbelt, MD

Using the Global Precipitation Measurement (GPM) Core Observatory satellite, launched in 2014, NASA and Japan Aerospace Exploration Agency researchers have taken the first 3D images of raindrops and snowflakes. The GPM snapshots will help research meteorologist Joe Munchak determine precipitation rates and support the improvement of weather models.

Posted in: Podcasts
Read More >>

John Hanson, Nodes Deputy Project Manager and Technical Lead, NASA Ames Research Center, Moffett Field, CA

On December 6, 2015, two CubeSats successfully launched to the International Space Station. As part of NASA’s Nodes mission, the CubeSats will soon communicate with each other and demonstrate the benefits of a networked "swarm" of spacecraft.

Posted in: Podcasts
Read More >>

Hollow-Core Optical Fiber

Confining light to an air core fiber is not easily done using traditional guidance methods such as total internal reflection. In this presentation we demonstrate guidance in air using photonic band gap guidance and anti-resonant rings. Single-mode hollow-core optical fibers with large cores, resulting in low loss are shown. We also present the attenuation dependence in these fibers and how, using fibers that guide light in air, we are able extend the wavelength range of silica fibers out to the infra-red.

Posted in: Tech Talks
Read More >>

Producing Prototypes with Additive Manufacturing

Rapid prototyping helps companies turn great ideas into successful products faster. 3D printing your prototypes directly from CAD data enables fast, frequent revisions based on real-world testing and feedback. This Tech Talk discusses some of today’s most well-known companies and how 3D printing is drastically helping to improve their product development cycle.

Posted in: Tech Talks
Read More >>

Jim Heidmann, Project Manager for NASA’s Advanced Air Transport Technology Project, and Jason Welstead, Aerospace Engineer

Jim Heidmann of Glenn Research Center (Cleveland, OH) and Jason Welstead of Langley Research Center (Hampton, VA) have led NASA efforts to develop all-electric and hybrid-electric designs for large passenger aircraft. Using low-carbon propulsion technology, they are exploring how planes can be redesigned and configured.

Posted in: Podcasts
Read More >>

Designing for Stereolithography - 10 ways to Ready Your Part for Industrial 3D Printing

Designing for industrial-grade 3D printing has fewer considerations than traditional manufacturing processes; however, elements such as resolution, surface finish, feature size and build orientation can impact part performance.

Posted in: Tech Talks
Read More >>

Dave McNally, Aerospace Engineer, Air Traffic Management, and Kapil Sheth, Aerospace Research Engineer, Ames Research Center, Moffett Field, CA

Two NASA-developed tools — the Dynamic Weather Routes (DWR) tool and a national implementation of DWR called the National Airspace System Constraint Evaluation and Notification Tool (NASCENT) — will help pilots identify and evaluate opportunities for more efficient paths around convective weather and other airspace constraints. Dave McNally and Kapil Sheth are the lead developers of the technologies. DWR was tested operationally by a major US airline for three years.

Posted in: Podcasts
Read More >>

Dr. Catherine A. Conley, Planetary Protection Officer, NASA Headquarters, Washington, DC

As NASA plans launches to Mars, Europa, and beyond, the agency's Office of Planetary Protection ensures that the environments are shielded against contamination, especially bacteria and microbes from Earth. Dr. Catherine Conley oversees and audits the planetary protection strategies for NASA’s exploration missions.

Posted in: Podcasts
Read More >>

Dr. Santo A. Padula, Materials Research Engineer, Glenn Research Center, Cleveland, OH

Dr. Santo Padula has developed testing techniques to support the development of advanced materials like metallic foams and shape memory alloys (SMAs). SMAs are metals that “remember” their original shape. With the application of heat, a deformed SMA returns to its initial form.

Posted in: Podcasts
Read More >>

CFD in Multiphysics Analysis

Computational fluid dynamics (CFD) is widely used in multiphysics analysis, often as a convective mode for other fields studied in a model. In this webinar, we will show you how to apply the capabilities of COMSOL Multiphysics® software to the analysis of laminar, multiphase, and turbulent flows.

Posted in: On-Demand Webinars
Read More >>

The U.S. Government does not endorse any commercial product, process, or activity identified on this web site.