Tech Exchange

Gauge Calibrates Three-Dimensional Coordinate Measuring Machine (CMM)

A gauge, which is used in examining the accuracy of a coordinate measuring machine (CMM), enables total calibration of errors and numbers of revisions of the measured values. The accurate calibration is possible for a CMM of any size. Various machines can also be calibrated by combining the gauge.

Posted in: Techs for License

Read More >>

Inspection Technology Identifies Surface Defects

An automated surface inspection technology identifies potential defects on a painted surface so that they can be remedied. The system provides a database so that the size, location, quality, and other aspects of production line defects can be tracked over time.

Posted in: Techs for License

Read More >>

Razor “Saws” Hair for Easier Shaving

With traditional razors, the cutting edge of a blade moves in the direction of the cut. A new shaving device, however, includes one or more blades that perform a vibrating motion perpendicular to the direction of the cut, and parallel to the blade’s edge; the hairs are cut by sawing, rather than cutting.

Posted in: Tech Exchange, Techs for License

Read More >>

Medical Valves Withstand Magnetic Fields

Parker Hannifin has created design concepts for valves that can be used in MRI-compatible ventilators. The valves, built to work with a variety of medical fluids and gases, are unaffected by strong magnetic fields and, in turn, do not create any magnetic fields of their own. In addition, the valves can be designed to handle a range of operating characteristics while minimizing total footprint.

Posted in: Tech Exchange, Techs for License

Read More >>

Nozzles Provide Spray Pattern Consistency

Macrospray® nozzles produce consistent mists at very low pressure. The nozzles have a uniformly distributed droplet size (10–30 μm Sauter Mean Diameter), which provides greater contact between deodorant, for example, and odorcausing particles or dust. Droplet size can be tuned for the degree of dust particle interaction and “knock-down” required. The nozzles provide multiple tips for high flow.

Posted in: Techs for License

Read More >>

Uni-Body Composite Plastic Chassis Reduces Part Count

A patented, one-piece, fiber-reinforced plastic composite chassis, produced by sheet molding compression, uses a highglass-content vinyl ester composite structural material, toughened with urethane for fatigue and damage tolerance.

Posted in: Techs for License

Read More >>

Piezo-Powered Actuators Offer Reduction in Weight

A set of piezoelectric actuators weighs 4 to 50 times less than other robotic actuators in end-effectors, including hydraulic or solenoid devices. The small piezos use ultra-low power: 3 mA holding current at 6.8 VDC, 7.5 mW. The piezo technology is a scalable actuator moved by a pre-loaded piezo stack. One- and two-armed versions are available.

Posted in: Techs for License

Read More >>