Muon tomography has been used to seek hidden chambers in Egyptian pyramids and image subsurface features in volcanoes. It seemed likely that it could be used to image injected, supercritical carbon dioxide as it is emplaced in porous geological structures being used for carbon sequestration, and also to check on subsequent leakage. It should work equally well in any other application where there are two fluids of different densities, such as water and oil, or carbon dioxide and heavy oil in oil reservoirs.

A contour plot of the Muon Intensity Change due to CO2 injection into the reservoir over a period of one year, expressed as standard deviations from the initial value.

Continuous monitoring of movement of oil and/or flood fluid during enhanced oil recovery activities for managing injection is important for economic reasons. Checking on leakage for geological carbon storage is essential both for safety and for economic purposes. Current technology (for example, repeat 3D seismic surveys) is expensive and episodic. Muons are generated by high energy cosmic rays resulting from supernova explosions, and interact with gas molecules in the atmosphere. This innovation has produced a theoretical model of muon attenuation in the thickness of rock above and within a typical sandstone reservoir at a depth of between 1.00 and 1.25 km. Because this first simulation was focused on carbon sequestration, the innovators chose depths sufficient for the pressure there to ensure that the carbon dioxide would be supercritical.

This innovation demonstrates for the first time the feasibility of using the natural cosmic ray muon flux to generate continuous tomographic images of carbon dioxide in a storage site. The muon flux is attenuated to an extent dependent on, amongst other things, the density of the materials through which it passes. The density of supercritical carbon dioxide is only three quarters that of the brine in the reservoir that it displaces. The first realistic simulations indicate that changes as small as 0.4% in the storage site bulk density could be detected (equivalent to 7% of the porosity, in this specific case). The initial muon flux is effectively constant at the surface of the Earth. Sensitivity of the method would be decreased with increasing depth. However, sensitivity can be improved by emplacing a greater array of particle detectors at the base of the reservoir.

This work was done by Max Coleman of Caltech; Vitaly A. Kudryavtsev, Neil J. Spooner, and Cora Fung of University of Sheffield; and Jon Gluyas of University of Durham for NASA’s Jet Propulsion Laboratory. NPO-48328


Topics:
Materials

This Brief includes a Technical Support Package (TSP).
Document cover
Differential Muon Tomography to Continuously Monitor Changes in the Composition of Subsurface Fluids

(reference NPO-48328) is currently available for download from the TSP library.

Don't have an account?