NASA’s Langley Research Center has developed a technology that uses commercially available additive print manufacturing to add various levels of structural hierarchy to thin-film surfaces. The approach adds very little mass to thin films, but provides substantial performance enhancements, such as increased damage tolerance to tearing and ripping. NASA developed this technology to provide new and improved ways to produce robust, ultra-lightweight space structures such as solar sails, solar shades, and antennas. Beyond space applications, the technology is well suited for other thin-film applications.

A thin-film specimen under load with rip-stop lines.

The technology uses additive print manufacturing to produce hierarchical and integrated structural and functional elements into large-area thin-film structures. Adding these structural and functional elements has the potential to enable very lightweight, large-scale thin films with improved damage tolerance, self-deployment capability, flexibility, and multifunctional (optical, thermal, electrical) connectivity and interrogation capabilities. Based on simple and proven additive manufacturing concepts, advanced geometrical, biomimetic (insect wing), and hierarchical structures could be applied to, or eventually integrated within, the bulk of large-area thin films using roll-to-roll processing techniques for a potentially low-cost manufacturing approach. The subject technology addresses many of the disadvantages of current large-scale membrane material systems, which are prone to damage or require extensive deployment and support structures.

Applications include solar space sails, arrays, and concentrators; space antennas and sun shades; inflatable structures (both Earth- and space-based); and chemical and radiation sensors.

NASA is actively seeking licensees to commercialize this technology. Please contact The Technology Gateway at This email address is being protected from spambots. You need JavaScript enabled to view it. to initiate licensing discussions. Follow this link for more information: .