Bearing surfaces are typically either metal-on-metal (MOM), ceramic-on-ceramic (COC), or metal-on-polyethylene (MOP). MOM and MOP couplings have the drawback that metallic or polyethylene particles can sometimes separate from the couplings, which can cause significant problems, particularly in a hip or joint replacement. COC couplings are less likely to lose particles due to wear, which makes them more biocompatible, but they are more susceptible to fracture. COC couplings also have a tendency to squeak as they move. Innovators at NASA’s Glenn Research Center have developed a technique using rare earth elements to fabricate a dual-phase ceramic composite that combines a wear-resistant phase and a solid-state lubricant phase. The result is a coupling material that, compared to currently used materials, exhibits a tenfold reduction in the friction coefficient, a sixfold reduction in wear, and a significant reduction in debris caused by wear. Glenn’s groundbreaking rare-earth aluminate composite has considerable potential, not only in biomedical applications, but also in commercial and industrial sectors.

Glenn’s approach utilizes a combination of alumina (Al2O3) and specially defined ratios of rare earth oxides. These rare earth elements are typically either yttrium or gadolinium, although other rare earths may be substituted to produce different targeted effects, including generating a multiphase composition instead of a dual-phase one. Glenn’s method of adding rare earths to the alumina material produces a two-phase composite system that is optimized for the targeted mechanical properties of wear resistance and coefficient of friction.

These composites can be formed by either casting from a melt with directional solidification or solid-state sintering of isostatically pressed powder preforms. In the latter process, the hot isostatic pressing both reduces the porosity of the ceramic material and increases its density prior to the sintering process. Glenn’s technique yields a composite with significant advantages over single-phase ceramics. Single-phase ceramics, although they display high strength and wear resistance compared to other materials and high-performance alloys like CoCr, also have a relatively high friction coefficient. The incorporation of rare earths allows the fabrication process to introduce a continuous second ceramic phase and create tertiary phases at the interfaces, which greatly improves the material’s friction properties without sacrificing the wear characteristics. This combination of sturdiness and reduced friction gives these materials great potential for use in a wide range of applications.

Potential applications include use in biomedical (e.g., hip and joint replacements), ball bearings and hard face seals, oil drilling, automotive and marine engines, and industrial machines.

NASA is actively seeking licensees to commercialize this technology. Please contact the Technology Transfer Office at This email address is being protected from spambots. You need JavaScript enabled to view it. to initiate licensing discussions. Follow this link for more information: .