TRACO POWER has released the TIB 80-EX series of 80-Watt DIN rail power supplies.

The products are designed for harsh environments and hazardous locations, with certifications for ATEX II3G and UL HazLoc Class I/Div 2 standards.

Features include:

  • 12/24/ 48V outputs (-2% ~ +17% VADJ Range)
  • high efficiency operation of 88-90%
  • 150% peak power for 4 seconds
  • a ruggedized metal enclosure (EN61373-qualified for railway shock and vibration)
  • DC-OK LED indicators on front and side panels

The protection circuits have back power immunity, short-circuit/overload protection, and a DC OK dry signal contact. The product’s reduced heat dissipation enables a -40 °C to +60 °C full load operating temperature range.

Outputs are radio-interference-suppressed to impede radiation at long output lines. The filter reduces the common mode current to within limits of telecommunication ports.

Units operate with a high power factor of up to 99%, with active power factor correction.

All models are safety approved to meet UL/EN 60950-1, UL508 listed, EN 600079-0/-7/-15, ATEX II3G and UL HazLoc Class I, Division 2 with EN55032 Class B for both radiated and conducted emissions.

Learn more about the TIB 80-EX Power Supply Series  .



Magazine cover
Tech Briefs Magazine

This article first appeared in the April, 2019 issue of Tech Briefs Magazine (Vol. 43 No. 4).

Read more articles from this issue here.

Read more articles from the archives here.