NASA’s Marshall Space Flight Center has developed a simple, cost-effective optical method for thin film stress measurements during growth and/or subsequent annealing processes. Stress arising in thin film fabrication presents production challenges for electronic devices, sensors, and optical coatings; it can lead to substrate distortion and deformation, impacting the performance of thin film products.
Traditional methods of determining film stress use ex-situ deflectometry techniques and require significant and costly modifications to the vacuum chamber to allow optical access to the substrate. These techniques determine film stress by measuring the change in substrate curvature resulting from stress.
NASA’s technique measures in-situ stress using a simple, noncontact fiber optic probe in the thin film vacuum deposition chamber. This enables real-time monitoring of stress during the fabrication process and allows for efficient control of deposition process parameters. By modifying process parameters in real time during fabrication, thin film stress can be optimized or controlled, improving thin film product performance.
NASA’s method infers the stress-induced substrate curvature by measuring the out-of-plane displacement of a single point on the substrate using a fiber optic displacement sensor. The probe gains optical access to the substrate through a normal fiber optic feedthrough common in vacuum systems. In turn, this simplification leads to a significant reduction in cost, complexity, and system requirements. It also eliminates interference effects. With a measurement sensitivity of 0.05 N/m, the method is comparable in sensitivity with MOSS and could potentially rival the sensitivity of the microcantilever technique.
NASA’s method can be used to measure the stress during film growth for heated substrates, as well as the evolution of stress during thermal annealing processes. The technique can be used in a variety of thin film applications, with no limitation on substrate size or reflective characteristics of deposited films. The methodology has been proven with magnetron sputtering of chromium films, where it was used to adjust process gas pressure to achieve zero stress.
NASA is actively seeking licensees to commercialize this technology. Please contact Sammy Nabors at