All-solid-state lithium metal and lithium-ion (Li-ion) batteries with inorganic solid-state electrolytes offer improved safety for electric vehicles and other applications. Current manufacturing technology, however, suffers from high cost, excessive amounts of solid-state electrolyte and conductive additives, and low attainable volumetric energy density.
A disruptive manufacturing technology now offers reduced manufacturing costs and improved volumetric energy density in all-solid cells. The new fabrication technique could allow solid-state Li-ion batteries to adopt nonflammable ceramic electrolytes using the same production processes as batteries made with conventional liquid electrolytes.
The approach mimics the low-cost fabrication of commercial Li-ion cells with liquid electrolytes, except that it utilizes solid-state electrolytes with low melting points that are infiltrated into dense, thermally stable electrodes at moderately elevated temperatures (~300 °C or below) in a liquid state and which then solidify during cooling. Nearly the same commercial equipment could be used for electrode and cell manufacturing, which substantially reduces a barrier for industry adoption.
The melt-infiltration technology developed at Georgia Tech uses electrolyte materials that can be infiltrated into porous yet densely packed, thermally stable electrodes. The one-step process produces high-density composites based on pressure-less, capillary-driven infiltration of a molten solid electrolyte into porous bodies including multilayered electrode-separator stacks.
“While the melting point of traditional solid-state electrolytes can range from 700 to over 1,000 °C, we operate at a much lower temperature range, depending on the electrolyte composition, roughly from 200 to 300 °C,” explained Gleb Yushin, a professor in the School of Materials Science and Engineering at Georgia Tech. “At these lower temperatures, fabrication is much faster and easier. Materials at low temperatures don’t react. The standard electrode assemblies, including the polymer binder or glue, can be stable in these conditions.”
The new technique could allow large automotive Li-ion batteries to be made safer with 100% solid-state nonflammable ceramic rather than liquid electrolytes using the same manufacturing processes of conventional liquid electrolyte battery production. The patent-pending manufacturing technology mimics low-cost fabrication of commercial Li-ion cells with liquid electrolytes but instead uses solid-state electrolytes with low melting points that are melted and infiltrated into dense electrodes. As a result, high-quality multilayered cells of any size or shape could be rapidly manufactured at scale using proven tools and processes developed and optimized over the past 30 years for Li-ion.
“Melt-infiltration technology is the key advance. The cycle life and stability of Li-ion batteries depend strongly on the operating conditions — particularly temperature,” Georgia Tech graduate student Yiran Xiao explained. “If batteries are overheated for a prolonged period, they commonly begin to degrade prematurely and overheated batteries may catch on fire. That has prompted nearly all electric vehicles (EVs) to include sophisticated and rather expensive cooling systems.”
In contrast, solid-state batteries may only require heaters, which are significantly less expensive than cooling systems.
Yushin and Xiao are encouraged by the potential of this manufacturing process to enable battery makers to produce lighter, safer, and more energy-dense batteries. “The developed melt-infiltration technology is compatible with a broad range of material chemistries including so-called conversion-type electrodes. Such materials have been demonstrated to increase automotive cell energy density by over 20% now and by more than 100% in the future,” said Georgia Tech research scientist Kostiantyn Turcheniuk, noting that higher-density cells support longer driving ranges. The cells need high-capacity electrodes for that performance leap.
Georgia Tech’s technique is not yet commercially ready but Yushin predicts that if a significant portion of the future EV market embraces solid-state batteries, “this would probably be the only way to go,” since it will allow manufacturers to use their existing production facilities and infrastructure.
“That’s why we focused on this project — it was one of the most commercially viable areas of innovation for our lab to pursue,” he said.
Battery cell prices hit $100 per kilowatt hour for the first time in 2020. They will need to drop below $70 per kilowatt hour before the consumer EV market can fully open, according to Yushin. Battery innovation is critical to that occurring.
The Materials Science Lab team currently is focused on developing other electrolytes that will have lower melting points and higher conductivities using the same technique proven in the lab. Yushin envisions the research team’s manufacturing advance opening the floodgates to more innovation in this area. “So many incredibly smart scientists are focused on solving very challenging scientific problems while completely ignoring economic and technical practicality. They are studying and optimizing very high-temperature electrolytes that are not only dramatically more expensive to use in cells but are also up to five times heavier compared with liquid electrolytes,” he explained. “My goal is to push the research community to look outside that chemical box.”
For more information, contact Professor Gleb Yushin at