Rugged Laptops

Latitude laptops from Dell Technologies

Dell Technologies, Round Rock, TX, introduced the Latitude 7330 Rugged Extreme and Latitude 5430 Rugged laptops that incorporate the Windows 11 operating system. The Latitude 7330 includes Intel core processors and up to 2 TB of PCIe solid-state drives. The Latitude 5430 is a 5G-capable, semi-rugged laptop with Intel core processors and 8, 16, 32, or 64 GB memory options.

For Free Info Visit Here 

DC-DC Converter

Power supplies from Acopian

Acopian, Easton, PA, launched an encapsulated wide-input DC-to-DC converter line of power supplies rated up to 60W. Wide-range DC inputs are set at 9-18 VDC, with output voltages ranging from 3.3 VDC to 48 VDC and up to 8A. Standard features include OVP internal protection, input/output isolation, short circuit protection, and the ability to operate in series.

For Free Info Visit Here 

CMOS Sensors

The Topaz series of industrial CMOS sensors

Teledyne e2v, Chestnut Ridge, NY, introduced the Topaz series of industrial CMOS sensors with 2MP and 1.5MP resolution devices that use global-shutter pixel technology. Housed in a 4.45-mm-wide chip scale package, the sensors have 2.5 × 2.5 μm global shutter pixel, readout noise of typically 3.3 electrons, and frame rate of >100 frames per second in 8-bit output mode.

For Free Info Visit Here 

Carrier Card

The APCe8775 carrier card

Acromag, Wixom, MI, offers the APCe8775 carrier card that allows a PC to communicate with an XMC mezzanine module over a PCI Express (PCIe) bus. The 3/4-length PCIe card is suited for use in smaller embedded computers and servers with reduceddepth expansion slots. The carrier’s PCIe x8 interface supports up to eight serial lanes for rapid data transfer between the plug-in XMC module and the host computer.

For Free Info Click Here 

Optical-to-Electrical Converter

The Model J736 high-voltage optical-to-electrical converter

Highland Technology, San Francisco, CA, introduced the Model J736 high-voltage optical-to-electrical converter that converts fiberoptic input to an adjustable-voltage digital output. It includes controls and test points for adjusting optical threshold and output voltage. An analog optical-power monitor output is provided for connecting to an oscilloscope. Optical threshold is adjustable from 0.2 mW to 2 mW.

For Free Info Click Here 

2D Drawing Software

The NUMcad 2D drawing tool

NUMcad 2D drawing tool from NUM, Naperville, IL, enables design and creation of executable G-code files for CNC cutting machines. It runs directly from the machine operator panel and also under Windows on any standard PC. Its user interface mimics that of many popular CAD packages. The software includes a postprocessor; shapes or patterns that have been drawn or imported can be automatically converted into an executable G-code file.

For Free Info Click Here 

Surface Sensor

The surfaceCONTROL 3D 3500 sensor

The surfaceCONTROL 3D 3500 sensor from Micro-Epsilon, Raleigh, NC, is designed for inspection of various surfaces such as metal, plastic, or ceramics. Full-area measurements are achieved via single snapshot for the inspection of geometry, shape, and surface. It features z-axis repeatability of up to 0.4 pm and measures flatness deviations or height differences.

For Free Info Click Here 

CMM Software

CAMIO software

LK Metrology, Hudson Heights, MI, announced CAMIO 2021 measurement, programming, analysis, and reporting CMM software. It automatically detects which surfaces of a CAD model should be used to measure the feature. Probe self-centering allows the center point of a V-groove to be automatically located and measured using a scanning probe.

For Free Info Click Here 

AI Tool for Simulation

ODYSSEE A-Eye applies pattern recognition.

Hexagon Manufacturing Intelligence, Elgin, IL, released ODYSSEE A-Eye, an artificial intelligence tool that enhances computer-aided engineering without the need for CAE preparation and simulation expertise. It applies pattern recognition to images, pictures, video, and simple datasets for analysis for machine learning applications in engineering simulation.

For Free Info Click Here 

Edge Computing Platform

The PACEdge industrial edge computing platform

Emerson, Charlottesville, VA, released the PACEdge industrial edge computing platform that combines open-source tools into a flexible platform for utilizing machine data and analytics. It helps users securely collect, analyze, store, and serve up machine data near the source or across enterprise systems. End users can build and deploy applications for uses including monitoring energy and machinery health.

For Free Info Click Here 

DC/DC Converters

The THR-WI series of 3/10/20/40 watt DC/DC converters

The THR-WI series of 3/10/20/40 watt DC/DC converters is available from Traco Power, San Jose, CA. The double reinforced insulation provides up to 3,000 VAC isolation. They operate over a 4-1 input range with operating temperatures from -40 to 80 °C. Models are fully encapsulated to withstand shock and vibration standards per IEC/EN 61373.

For Free Info Click Here 

Micro-CT Imaging System

The UniTOM HR micro-CT system

Tescan Orsay Holding, Brno, Czech Republic, released the UniTOM HR micro-CT system with sub-micron-resolution, 3D non-destructive imaging for static studies and high temporal resolution for uninterrupted 4D dynamic CT experiments. It can characterize newly developed materials at micro-CT spatial resolution.

For Free Info Click Here 

PCB Design Software

Easy-PC version 25 PCB design software

Number One Systems, Tewkesbury, UK, released Easy-PC version 25 PCB design software that enables users to create schematics, PCB layout, and manufacturing output. A set of libraries that can be altered and extended is also included, as is a Component Search Engine with more than 15 million parts available to download for free and methodology for specifying whether vias are to be tented.

For Free Info Click Here 

Ultrasonic Sensor

The USisafety 2-channel ultrasonic sensor

Pepperl+Fuchs, Twinsburg, OH, offers the USisafety 2-channel ultrasonic sensor that features two transducers connected to a control interface. On each of the two independent channels, objects can be detected via an elliptical sound beam within ranges of up to 2,500 mm. Two safe OSSD outputs are provided for signal output.

For Free Info Click Here