Dual Locking C14 IEC Connector

Dual locking C14 IEC connector from MEGA Electronics

The SG03DC from MEGA Electronics, New Brunswick, NJ, contains side locking tabs similar to the Raritan Securelock. It will mate with any standard nonlocking C13 Outlet along with Raritan rack iPDU's equipped with Securelock C13 Outlets. cUL rating is 15 amperes at 250 volts, for cable types SVT, SVTO, SVTOO, SJT, SJTW, SJTO, SJTOW, SJTOO, sJTOOW, SJ, SJO, SJOO, SJOW, SJOOW, SJE, SJEO, SJEOO, SJEW, SJEOW, and SIEOOW.

For Free Info Visit Here 


Encapsulated 9-75 Volt DC/DC Converters

Encapsulated 9-75 volt DC/DC converters from Flex Power Modules

Flex Power Modules, San Jose, CA, has expanded its range of 2” x 1” encapsulated, through-hole DC/DC converters with the addition of three new parts with single outputs of 24 V (21.6-26.4 V), 48 V (43.2-52.8 V) and 54 V (48.6-59.4 V). Nominal inputs are 12 V, 24 V, 28 V, or 48 V for a wide range of industrial, transportation, RFPA, and IT applications.

For Free Info Visit Here 


Pressure Sensors

Absolute, gauge, and sealed gauge pressure sensors from CUI Devices

CUI Devices, Lake Oswego, OR, is announcing the addition of pressure sensors to its product portfolio. Offering absolute, gauge, and sealed gauge pressure types, these pressure sensors based on piezo technology feature analog or digital I2C outputs and pressure ranges from 0 kPa up to 100 MPa. All PS series models are temperature compensated and housed in stainless steel construction with an O-ring seal.

For Free Info Visit Here 


Fully Integrated Doherty RF Transistor

Fully integrated Doherty RF transistor from Ampleon

Ampleon, Nijmegen, The Netherlands, introduces the B11G3338N80D push-pull 3-stage fully integrated Doherty RF transistor, being the carrier product for GEN 11 Macro driver family covering all sub-6GHz frequency bands. This highly efficient multiband device covers a frequency range from 3.3 to 3.8GHz, enabling the implementation of next-generation high power and high-efficiency macro base stations.

For Free Info Visit Here 


Cloud-Based Industrial Controls Simulation

Simulation Cloud for the DeltaV distributed control system from Emerson Automation Systems

Emerson Automation Systems, Austin, TX, has released DeltaV™ Simulation Cloud for the DeltaV distributed control system to provide organizations a low-overhead, safe, intuitive platform for collaborative engineering and testing and training. Operators and engineers can connect to simulated replicas of their control systems — managed and maintained by Emerson — from anywhere in the world via a secure web interface.

For Free Info Visit Here 


Remote Racking Solution

Remote racking solution from CBS ArcSafe

The RRS-3 HVF remote racking solution from CBS ArcSafe, Denton, TX, allows technicians to remotely rack IN and OUT HVF-style vacuum circuit breakers from outside the arc-flash boundary (up to 300 feet away). Automating the racking procedure reduces operator fatigue and increases safety. Installation and operation do not require any modifications to existing electrical equipment.

For Free Info Visit Here 


Build-to-Order High Precision XZR Positioning Stages

Build-to-order high precision XZR positioning stages from Optimal Engineering Systems

Optimal Engineering Systems, Van Nuys, CA, Build-to-Order High Precision XZR Positioning Stages (X-axis, Z-axis, and Rotary-axis) are the newest additions to the OES family of motion control stages. Available linear stages have travel lengths of 15 mm, 30 mm, 50 mm, and 75 mm for the X and Z axes. For the rotary axis, 60 mm or 100 mm diameter table diameters are available.

For Free Info Visit Here 


Laser Scanner

3D handheld scanners from Exact Metrology

Exact Metrology, Brookfield, WI, has increased the capability of their Artec 3D handheld scanners with the new HD mode. Handheld scanners can scan dark or shiny surfaces in high resolution without additional steps. Using the Artec AI engine, little to no noise in the raw scan data results in cleaner processed data and also saves time when producing the final 3D model.

For Free Info Visit Here 


ZeroTouch® 3D Scanning Brake Disc Inspection

3D scanners that measure a brake disc from DWFritz Automation/Sandvik

The DWFritz Automation/Sandvik, Wilsonville, OR, metrology and inspection platform uses 3D scanners that measure a brake disc in a single inspection process lasting just a few seconds, while the analysis software creates a digital twin based on the measurement of millions of data points. The system can be integrated directly into a production line and can operate without much intervention, eliminating time-consuming loading and unloading processes.

For Free Info Visit Here 


Life Cycle Assessment Solution

“Sustainable Innovation Intelligence” life cycle assessment solution from Dassault Systems

Dassault Systems, Paris, France, announced the launch of “Sustainable Innovation Intelligence,” its life cycle assessment solution that enables companies to minimize the environmental impacts of the products, materials, and processes they create. Fully embedded in Dassault Systèmes’ 3DEXPERIENCE platform, the cloud-based solution integrates the ecoinvent database on the impacts of more than 18,000 industrial and agricultural processes.

For Free Info Visit Here 


Parts Measuring Machine

Cross Range optical measurement system from METRIOS

The Cross Range optical measurement system from METRIOS, Santarcangelo di Romagna, Italy, acquires measurements with a non-contact optical system. It combines high resolution with wide fields of view — ideal for large parts and multi-piece measurements. It offers high resolution and automatic focus across the full measuring field, so that even the smallest details and parts requiring a different focus position can be captured.

For Free Info Visit Here 


Polarizing Beamsplitter Cube

Polarizing beamsplitter cube from Precision Glass & Optics

Precision Glass & Optics, Santa Ana, CA, announces the new polarizing beamsplitter cube that splits up the S & P polarization of light with extinction ratios from Tp/Ts 1000:1 and Rs/Rp 1000:1. PG&O's specialty beamsplitters are designed to work with lasers and are well-suited for other optical applications. The entrance and exit faces of the cube beamsplitters have anti-reflection (AR) coatings to greatly improve their performance.

For Free Info Visit Here 


Hazardous Location Connectors

Hazardous Location Connectors series from Men-com Corp

The Hazardous Location Connectors series from Men-com Corp, Oakwood, GA, meets the requirements for Class I Division 2 environments defined by article 500 of the National Electric Code (NEC). Class I is a hazardous location in which flammable gas or vapor may be present in sufficient quantities to be considered ignitable or explosive. Division 2 is an area that is not likely to contain dangerous concentrations of flammable substances in closed containers.

For Free Info Visit Here 


Smart Robot Assistant

Autonomously driving robotic assistance system from ONTEC Automation

ONTEC Automation GmbH, Naila, Bavaria, Germany, has developed an autonomously driving robotic assistance system. The “Smart Robot Assistant” uses the synergies of mobility and automation: it consists of an intralogistics platform, a flexible robot arm and a robust 3D stereo camera system. For a customer in the textile industry, the AGV (Automated Guided Vehicle) is being used for the automated loading of coil creels.

For Free Info Visit Here