Auto-Focus Camera
The Imaging Source, Charlotte, NC, has introduced Aptiris, USB 3.1 autofocus cameras designed for dynamic machine vision applications where maintaining a fixed working distance is not always possible. Aptiris delivers consistently sharp imaging via software driven one push autofocus, ensuring focus stability despite fluctuations in object distance. Equipped with the latest CMOS sensors from onsemi and Sony, Aptiris cameras deliver outstanding image quality and reliable performance even in low light environments. Compatibility with USB3 Vision and UVC enables straightforward integration into new or existing systems.
Visit Here
Thermographic Zoom Camera
STMicroelectronics performed non-destructive fault analysis on chips, discrete components, sensors, LEDs, and power modules using Dresden, Germany-based InfraTec’s E-LIT system in Shenzhen, China, and Calamba, Philippines. The E-LIT solution employs Lock-in Thermography by selectively applying electrical excitation to detect and analyze local faults based on thermal anomalies. Using a high-end infrared camera from the ImageIR® series, even the smallest defects causing minimal temperature deviations can be detected, enabling effective fault isolation at chip and power module level.
Visit Here
Compact RF Modules
Würth Elektronik, Waldenburg, Germany, presents the Proteus-IV and Ophelia-IV components, two new high-performance RF modules based on the latest Nordic nRF54L15-SoC semiconductor. Proteus-IV is a ready-to-use Bluetooth low-energy 6.0 module with preinstalled firmware, while Ophelia-IV is a flexible developer platform. Measuring just 8 × 12 × 2.3 mm, the compact radio modules equipped with a 1.5 MB flash and 256 KB RAM are based on the new nRF54L15 SoC from Nordic.
Visit Here
Angle Sensors
Novotechnik U.S., Southborough, MA, introduced the Vert-X 13E Series of touchless rotary sensors. These sensors use a magnetic pick up that is secured to the rotating object, so that there is no direct mechanical linkage between the shaft and the measuring system, and therefore no wear. The Vert-X 13E Series is hermetically sealed, without any moving seals, to IP69 and therefore provides long life even under the harshest water, dust and oil environments.
Visit Here
High-Isolation Chokes
Coilcraft, Cary, IL, presents the CMA family of automotive-qualified common mode chokes that provide high current capability, high frequency noise suppression, and high isolation voltage for automotive power electronics. Suitable for inverters, motor drives, onboard chargers, as well as telecom and industrial applications, the CMA series offers suppression of high frequency common mode noise up to 100 MHz, excellent current ratings up to 8.2 A, and isolation (hipot) up to 1500 Vrms. The surface-mount toroidal components are AEC-Q200 qualified for reliable power line filtering.
Visit Here
High Voltage Transducer
Danisense, Taastrup, Denmark, has expanded its DN1000ID current transducer product family with the introduction of the new DN1000ID CP02 model. The DN1000ID CP02 features a significantly increased creepage and clearance distance of 38 mm and a raised voltage of 3200V for uninsulated cables. These enhancements make the device particularly well suited for power measurement and power analysis in EV chargers, power inverters, and battery energy storage systems.
Visit Here
Smart EtherCAT I/O
Beckhoff, Savage, MN, introduced the new ED series EtherCAT Terminals, offering a modernized hardware format and expanded functionality while retaining full compatibility with existing Beckhoff hardware. The DIN rail mounted ED series EtherCAT Terminals are characterized by a modernized design, tool free installation via push in wiring connections, and additional app based diagnostics via a scannable product data matrix. These new IP20 rated EtherCAT Terminals reduce system costs without compromising I/O functionality or performance.
Visit Here
Hybrid Gas Analyzer
Emerson, Shakopee, MN, announced the release of its Rosemount™ QX1000 Continuous Gas Analyzer, ideally suited for use in continuous emissions monitoring systems (CEMS). The QX1000 is the world’s first analyzer to combine laser and paramagnetic detection methods, using paramagnetic detection for O 2 and quantum cascade laser direct absorption spectroscopy for all other gases. This integration of different technologies and a modular approach provide a flexible, single-system solution tailored to diverse application needs. The QX1000’s robust design with low maintenance requirements also reduces lifecycle cost and downtime.
Visit Here
Wheel Vector Sensor
Kistler, Winterthur, Switzerland, released the new RV-5 version of the wheel vector sensor, capturing wheel movements in five axes even more accurately and with greater robustness. Thanks to innovative electronics with magnetic encoders, the sensor delivers higher quality wheel measurement for vehicle dynamics control. The RV-5 measures wheel position, steering angle, and camber angle directly at the wheel carrier, remains fully drop-in compatible with its predecessor, the RV-4, and delivers stable, reproducible measurements even in dust, splash water, and strong vibrations.
Visit Here
Shop-Floor CT
LK Metrology, Derby, United Kingdom, has introduced the innovative COREX 250 from Ready Metrology, the holding group’s brand that develops easy-to-use X-ray CT as well as CMM solutions for shop floor applications. The new industrial computed tomography system is designed for the production environment and features a 230 mm3 working volume. A key innovation of the COREX 250 is its on-board integrated software. Unlike systems that require complex external software, it handles everything internally, giving immediate results.
Visit Here
Ultra Broadband Capacitors
KYOCERA AVX, Fountain Inn, SC, expanded its selection of 550/560 Series ultra broadband capacitors to better satisfy surging demand for high-speed, high-bandwidth optical communication systems. The 550/560 Series ultra broadband capacitors are high quality multilayer ceramic capacitors engineered to provide reliable, repeatable ultra broadband RF/Microwave performance from 7 kHz to 110 GHz. They are available in three EIA case sizes and equipped with tin-or gold-plated nickel barrier terminations compatible with reflow soldering and designed to prevent base metallization from leaching into the solder and forming brittle compounds.
Visit Here
Edge AI Workstation
Aetina Corporation, New Taipei City, Taiwan, launched its AIP-FR68S AI Agent Edge Workstation at Embedded World 2026, demonstrating enterprise-grade agentic AI intelligence. As the flagship addition to the MegaEdge series, the AIP-FR68S supports NVIDIA RTX PRO Workstation GPUs and Qualcomm® Cloud AI 100 Ultra cards, combining high performance, high scalability, and proprietary maintenance design. Equipped with a PCIe Gen5 high-speed switch, the workstation enables enterprises to execute real-time fine-tuning, multimodal analysis, and automated instruction generation on-premises while ensuring complete data privacy in edge environments.
Visit Here
Single-Plane Scanners
Datalogic, Bologna, Italy, unveiled the next generation of its Magellan 3600VSi and 3700HSi single-plane scanners, delivering breakthrough innovation designed to elevate performance across assisted lanes and self-checkouts. The new Magellan series introduces a market-first hybrid reading capability by integrating a built-in RFID antenna and 1MP camera, providing unmatched tracking at the point of sale. Designed with sustainability embedded, the scanners feature low power consumption, TÜV-certified recycled materials, and recyclable packaging to deliver a quicker, more intelligent, and highly secure checkout experience.
Visit Here
3-Phase Power Supplies
Wieland Electric, Bamberg, Germany, launched the PRO LINE WIPOS PSU3 three phase power supply series, engineered for demanding industrial environments. The PSU3 delivers high efficiency up to 95 percent, a compact footprint, strong surge protection, and fast push-in connectivity to keep machines running reliably. Built to address limited panel space, unpredictable loads, and harsh electrical noise, the PSU3 provides stable, continuous power while reducing energy use, cabinet heat, and cooling requirements for industrial applications.
Visit Here
