Originating Technology/NASA Contribution

Beginning in 1985, a team of engineers at the Space Telescope Science Institute in Baltimore began developing software to manage various time-consuming tasks for the Hubble Space Telescope, launched in 1990. In the early phases of development, the complexity of scheduling different tasks became clear when the engineers realized Hubble’s power restrictions.

A team of engineers at the Space Telescope Science Institute developed software to manage time-consuming tasks for the Hubble Space Telescope, launched in 1990 and shown here during its last servicing mission in May 2009. The scheduling technology is now used in software that helps hospitals reclaim unused capacity.
When it first became operational, Hubble functioned under a variety of scheduling restraints. For example, in order to conserve energy, it could have only two scientific instruments operating at one time. This was further complicated by the length of time it took to move the instruments into position. Changing Hubble’s orientation to a new target, or slewing, was a slow process, moving only 90 degrees per hour. Likewise, the instruments themselves could take up to 24 hours to shift from standby to operative modes. Further complicating the schedule was the fact that certain tasks only operated during specific times, needing protection from (or exposure to) direct sunlight, or requiring specific angles, locations, or other conditions.

In order to compensate for these scheduling constraints, Hubble’s software team designed a knowledge-based system that worked around these scheduling conflicts using a variety of methods, such as backward and forward chaining—“If X is a near-infrared spectrometer, then X operates only when facing away from the Sun”—logical arguments used to design computer systems and software.

Partnership

One of the team members who worked on Hubble, NASA computer scientist Don Rosenthal, helped develop the scheduling system, refining the algorithms in the programming and consequently increasing the telescope’s efficiency. After working on Hubble, Rosenthal acquired intellectual property rights to the scheduling technology. He then ran the artificial intelligence application group at Ames Research Center, where he developed programming for the Mars Exploration Rovers, the Pioneer spacecraft, and a system for human space flight.

Rosenthal went on to co-found Menlo Park, California’s Allocade Inc. in 2004, and is now chief technical officer of the company and chair of the board of directors. Using Rosenthal’s experience with Hubble’s software, Allocade created its On-Cue software suite, which optimizes ever-changing hospital schedules.

Product Outcome

On-Cue is a software solution that enables hospitals to reclaim their unused capacity. The system helps hospital departments handle dynamic rescheduling issues by allocating resources and managing disruptions in real time for inpatient and outpatient imaging procedures. In the past, staff made these time-consuming adjustments through numerous phone calls, whiteboards, handwritten notes, and faxes, which caused delays and frustration for both patients and staff.

By automating the rescheduling process, Allocade helps hospitals manage frequent changes more efficiently, which can reduce operating costs and wait times. The emergency, transport, and radiology departments have immediate access to the latest schedules, and the system alerts staff to pending tasks with instant messages and other visual cues. When there is an unexpected flood of emergency procedures, for instance, the system can reallocate staff and resources, telling a transport member to keep a scheduled patient comfortable in her room until later, and freeing up transport for unexpected emergent cases.

In order to reschedule radiology procedures, On-Cue pulls data from and synchronizes with a facility’s radiology information, picture archiving, and communication systems. It can then direct patient data to the best resource, automatically rescheduling procedures and having information readily available for use and analysis. The system displays live updates on monitors in high-traffic areas, which allows staff to track patient status and procedures quickly. On-Cue, which is compatible with standard personal computers and existing intranets, also provides the ability to balance loads between different machines, and makes specific recommen­dations when rescheduling, taking into consideration various department and hospital policies and constraints. As a result, hospitals can manage staff and patient flow far more efficiently, which increases satisfaction and profit.

On-Cue helps hospital departments handle dynamic rescheduling issues by allocating resources and managing disruptions in real time for inpatient and outpatient imaging procedures. By automating the rescheduling process, the software can reduce operating costs and wait times.Image courtesy of Allocade Inc.
Allocade offers the On-Cue system in three modules: the On-Cue Navigator Optimization Engine, On-Cue Communicator, and On-Cue Aviator Workstation Software Client. As the core technology in the On-Cue solution, Navigator is the optimizer that adjusts to new schedules as needs arise. Communicator, meanwhile, is in charge of collecting and displaying information to clinical areas and updating displays in real time, enabling staff to make decisions on patient care efficiently. Aviator tracks all resources, connecting information from the other two modules in a snapshot view. Allocade can also adjust the On-Cue system to specific workflow preferences and can pull data from existing feeds.

One of the first customers for Allocade’s system was the California Pacific Medical Center (CPMC) in San Francisco. Prior to adopting the On-Cue software, CPMC had 2 weeks of backlog in its computerized tomography (CT) department. Schedules changed constantly, and staff began to realize that traditional tracking methods simply wasted too much time. The radiology department was thrown into chaos when the inevitable emergency procedures would take precedence over scheduled procedures, and other departments had no way of efficiently tracking changes to their patients’ visits to radiology.

CPMC adopted the On-Cue software for beta testing in 2006. The medical center soon reported noticeable improvements to efficiency, including a 12-percent increase in procedure volume, 35-percent reduction in staff overtime, and significant reductions in backlog and technician phone time. Allocade began shipping the full commercial version of On-Cue for CT departments in January 2008, and now offers versions for both outpatient and inpatient magnetic resonance imaging (MRI), ultrasound, interventional radiology, nuclear medicine, positron emission tomography (PET), radiography, radiography-fluoroscopy, and mammography. Customers can buy the software for just a few departments or as a software suite for an entire radiology department.

In 2009, Pennsylvania’s Harrisburg Hospital became the first medical center on the East Coast to adopt On-Cue.

On-Cue™ is a trademark of Allocade Inc.


Topics:
Medical