Designed with a programmable function, the CLSD Series of programmable LED drivers from NMB Technologies Corporation (Chatsworth, CA) features a 10W to 20W power rating, and a 0 to 10W voltage dimming function. Using a few models, the programming function sets a range of output current.

altOutput current levels can be preset by the system designer or adjusted as the application develops. With a 4-pin connector programming box and USB adapter cable, the programming utility recognizes the NMB driver model and displays the optimized factory setting. Users can utilize the same programming kit to program as many drivers as necessary.

The CLSD Series includes protection against short-circuit, overvoltage, overload, and overtemperature. Ingress protection meets IP66 specifications. The programmable LED drivers are offered in low current, 10W ~ 20W, with an efficiency rate at full load of 85%. They are designed to support system life requirements greater than 130,000 hours.

For Free Info Visit http://info.hotims.com/40433-341