Code Generator

dSPACE, Wixom, MI, offers Version 4.4 of TargetLink code generator software that features controller modeling with MATLAB® code from MathWorks. It describes algorithms and behavior directly with MATLAB code in a Simulink model. The module for MATLAB Code can be used to map the modeling process. Production code generated with TargetLink can be validated and tested on a dSPACE real-time system so users can immediately verify how the developed code works in a real-world environment.

For Free Info Click Here


Rapid-Release Pins

JW Winco, A Ganter Company, New Berlin, WI, introduced WN 100.1 T-handle, inch-size, rapid-release pins with stainless steel shanks for fastening and alignment applications. The pin will not release until the button on the handle is depressed, at which time the balls retract into the shank, allowing the pin to be inserted into or removed from its position. The shaft, inner spindle, split ring, spring, and balls are stainless steel and the handle is die-cast aluminum with a black anodized finish.

For Free Info Click Here


Power Supplies

TRACO Power North America, San Jose, CA, released the TIB-EX family of 80/120/240/480 Watt DIN rail power supplies for harsh environments. They offer 12/24/48V outputs, 150% peak power for four seconds, and a ruggedized metal enclosure. Protection circuits include back power immunity, short-circuit/overload protection, and a DC OK dry signal contact. The units provide a -40 to +60 °C full load operating temperature range.

For Free Info Click Here


Cable Assemblies

Intelliconnect, Crossville, TN, introduced RF cable assemblies comprised of cables, connectors, and terminations available in low-loss, semi-rigid, semi-flex, and conformable versions. Low-loss, phase-stable, flexible microwave cable assemblies operate up to 70-GHz. Semi-rigid cables are made using a solid metal outer conductor that can be bent into shape as required; semi-flexible cables offer a lighter, more flexible alternative and enable cable to be flexed.

For Free Info Click Here


3D Printers

FELIX PRO L and XL 3D printers from FELIXprinters, IJsselstein, The Netherlands, offer print chambers that incorporate warm and cold zones. The warm zone controls temperatures during build and the cold zone keeps printer electronics cool. The Pro L can build parts up to 300 × 400 × 400 mm or 11.8 × 15.75 × 15.75”. The Pro XL has a build chamber of 600 × 400 × 600 mm or 23.62 × 15.75 × 23.62”. Features include dual extruders that are at different print levels, avoiding collisions. Both models include a 7” touchscreen module with integrated print server.

For Free Info Click Here


Equipment Enclosures

ROLEC Enclosures, Bridgeville, PA, introduced profiPANEL command enclosures that house machine controls. The IP 65-rated enclosures can accommodate all types of displays and electronic control equipment. Internal rails using M4/M5 nuts allow easy mounting of the equipment. The front of the enclosure is made to measure for edgeless flush mounting of a front plate that is permanently connected to the housing. All housings are manufactured from extruded aluminum with polyamide corner covers.

For Free Info Click Here


Flow Controllers

AW-Lake Co., Oak Creek, WI, introduced PCU Series controllers that connect with thermal mass flow meters or controllers to provide a local display of flow output. Serving as a single- or multi-channel mass flow controller with up to four channels, the instruments support multiple unit networked operations. A backlit display offers views of process variables and programmed setpoints for each connected device on one screen. Process control functionalities are provided for batching, setpoint control, resettable dual totalizer, and valve override control.

For Free Info Click Here