A breakthrough by an Australian collaboration of researchers could make infrared technology easy-to-use and cheap, potentially saving millions of dollars in defense and other areas using sensing devices, and boosting applications of technology to a host of new areas, such as agriculture. Infra-red devices are used for improved vision through fog and for night vision and for observations not possible with visible light; high-quality detectors cost approximately $100,000 (including the device at the University of Sydney) and some require cooling to -200°C.
Now, research spearheaded by researchers at the University of Sydney has demonstrated a dramatic increase in the absorption efficiency of light in a layer of semiconductor that is only a few hundred atoms thick – to almost 99 percent light absorption from the current inefficient 7.7 percent. Professor Martijn de Sterke, from the University of Sydney’s School of Physics, said the team discovered perfect thin film light absorbers could be created simply by etching grooves into them.
“Conventional absorbers add bulk and cost to the infrared detector as well as the need for continuous power to keep the temperature down. The ultrathin absorbers can reduce these drawbacks,” Professor de Sterke said. “By etching thin grooves in the film, the light is directed sideways and almost all of it is absorbed, despite the small amount of material – the absorbing layer is less than 1/2000th the thickness of a human hair,” he said.
Co-lead author Dr Björn Sturmberg, who carried out the research as a PhD student at the University of Sydney with the support of the Australian Renewable Energy Agency, said the findings did not rely upon a particular material but could be applied to many naturally occurring weak absorbers.
“There are many applications that could greatly benefit from perfectly absorbing ultra-thin films, ranging from defense and autonomous farming robots to medical tools and consumer electronics,” Dr Sturmberg said.
The Director of Australia’s National Computational Infrastructure (NCI), Professor Lindsay Botten, said the structures were much simpler to design and fabricate than using existing thin film light absorbers, which required either complex nanostructures, meta-materials and exotic materials, or difficult-to-create combinations of metals and non-metals.