An array of monolithically fabricated nanoklystrons has been proposed as a frequency-agile and/or redundant source of electromagnetic radiation at frequencies ranging from about 0.3 to about 3 THz. Each nanoklystron would, as its name suggests, be a very small klystron. Like other klystrons, a nanoklystron would operate at a frequency determined primarily by the dimensions of its resonant cavity and the spacing of its electron-bunching grids, with some dependence on applied voltages. An individual nanoklystron could be fabricated in top and bottom halves from silicon wafers and would contain an integral output waveguide and feed horn (see Figure 1). In typical operation, a nanoklystron without a mechanical tuner would generate power only at a fixed frequency. Thus, frequency agility and/or redundancy could be obtained by incorporating into the array multiple nanoklystrons that are pretuned to generate signals at all required frequencies.

Figure 1. A Nanoklystron would resemble a conventional klystron but would be many times smaller, with resonant cavities formed by micromachining in silicon.
The array of nanoklystrons would be fabricated in substantially the same manner as that of a single nanoklystron, except that the nanoklystrons would be spaced at angular intervals near the periphery of the wafer. The output port of each nanoklystron would then be oriented along the edge of the wafer (see Figure 2). Each nanoklystron would be fabricated to oscillate at a different predetermined frequency within the desired output band. A particular frequency would be selected by indexing the wafer.

Figure 2. An Array of Nanoklystrons with integral output waveguides and feed horns would be fabricated in top and bottom halves of a disk made from silicon wafers. A desired nanoklystron would be selected by rotating the disk to register the top and bottom power contact pads of that nanoklystron with fixed top and bottom contacts.
The dimensions of silicon wafers [the present industry standard diameter is 8 in. (≈20 cm)] and the horn dimensions required for operation in the intended submillimeter wavelength range are compatible with making thousands of nanoklystrons on a single wafer in a single production run. Contact pads for supplying power to individual klystrons could be formed on the top and bottom of the disk, and registration notches could be formed at corresponding angular locations on the top or bottom of the disk; this would make it possible to simply rotate the disk to a detent at a designated angular position in order to obtain radiation at the frequency of the nanoklystron at that position. The contacts and detents would be arranged so that the feed horn of the selected nanoklystron would be in the proper position for output coupling.

This work was done by Peter Siegel of Caltech for NASA's Jet Propulsion Laboratory. For further information, access the Technical Support Package (TSP) free on-line at www.nasatech.com/tsp  under the Electronics & Computers category.

In accordance with Public Law 96-517, the contractor has elected to retain title to this invention. Inquiries concerning rights for its commercial use should be addressed to

Intellectual Property group

JPL

Mail Stop 202-233

4800 Oak Grove Drive

Pasadena, CA 91109

(818) 354-2240

Refer to NPO-21033, volume and number of this NASA Tech Briefs issue, and the page number.



This Brief includes a Technical Support Package (TSP).
Document cover
Array of Nanoklystrons for Frequency Agility or Redundancy

(reference NPO-21033) is currently available for download from the TSP library.

Don't have an account? Sign up here.