Traditional azimuth-elevation (“az-el”) stages are used to point a variety of devices ranging from large optical telescopes to tank guns. Such a stage typically has an “elevation” stage having a horizontal axis mounted on an “azimuth” stage with a vertical axis. Both stages are often motorized.
Optical communications transceivers often require two-axis motorized control, as when the communications link is between a ground station and an aircraft or satellite. In such applications, the traditional azimuth-elevation stage has two important drawbacks: a “gimbal lock” exclusion zone at zenith and susceptibility to pointing errors caused by backlash. Azel stages in which the azimuth stage cannot rotate a full 360° have the additional drawback of an azimuth exclusion zone.
The diagonal-axes stage described here mitigates or eliminates all of these problems. Instead of one vertical axis and one horizontal axis, a diagonal-axes stage has two horizontal axes, both oriented at 45° to the trajectory of the target. For example, a ground station located on the equator tracking a satellite with an equatorial orbit would have one axis parallel to northeast and southwest, and the other axis parallel to northwest and southeast.
The diagonal-axes stage is considerably less vulnerable to backlash. If it is correctly oriented, its axes rotate in only one direction during an overhead pass by a satellite. As a result, the effects of backlash may be inherently eliminated. If the gravity-induced torque on either axis changes during the pass, then backlash may become important during the part of the pass where the gravity torque, instead of opposing the motion of the stage, pushes the stage in the direction of motion. This can result in the loss of gear-to-gear contact in one or more stages of the gear reduction mechanism. In this case, a preload spring used to eliminate backlash need only be sufficiently strong to overcome the gravity torque, i.e. it need not overcome friction in the gear train.
The diagonal-axes stage is not backlash-free for arbitrary target trajectories such as an aircraft might execute. If properly oriented for any particular satellite, however, it is backlash-free for all passes of that satellite, which will trace out parallel paths on the sky, and for all passes of any other satellite that are perpendicular to the first. It will also be backlash-free for some fraction of other satellite trajectories.
This work was done by Martin W. Regehr and Vachik Garkanian of Caltech for NASA’s Jet Propulsion Laboratory. NPO-47427
This Brief includes a Technical Support Package (TSP).
Diagonal-Axes Stage for Pointing an Optical Communications Transceiver
(reference NPO-47427) is currently available for download from the TSP library.
Don't have an account? Sign up here.