Fracture testing drives material selection and design considerations for virtually all structural components. The conventional method for sample preparation and Mode I Fracture Testing involves using bonding hinges or loading blocks to apply the opening peel force to the specimen surface. Achieving accurate and repeatable results can often require significant re-work, making current methods expensive and time-consuming for structural testing labs.

(Left): The drill hole jig and (right) Sandia’s solution for Mode I Fracture Testing.

A team developed a new approach to fracture testing that uses a tabletop drill hole jig and a rotating pin block to prepare and load the specimen. This approach eliminates hinges and adhesive bonding for sample preparation, which allows for rapid and accurate testing of samples at a fraction of the cost and time compared with conventional methods.

The solution for Mode I Fracture Testing sample preparation has a load train capable of free rotation during crack tip opening displacement. Use of high-strength and corrosion-resistant materials ensures durability and accuracy for testing under various environmental conditions. Multiple configuration options to the standard base package allow for varied material construction and different test ranges to suit most sample testing conditions and applications.

For more information, contact Heather Clark at This email address is being protected from spambots. You need JavaScript enabled to view it.; 505-844-3511.