Soft pressure sensors have received significant research attention in a variety of fields including soft robotics, electronic skin, and wearable electronics. Researchers have developed a highly sensitive wearable pressure sensor capable of sensitive, precise, and continuous measurement of physiological and physical signals and shows great potential for health monitoring applications and the early diagnosis of diseases.

A soft pressure sensor is required to have high compliance, high sensitivity, low cost, long-term performance stability, and environmental stability in order to be employed for continuous health monitoring. Conventional solid-state soft pressure sensors using functional materials, including carbon nanotubes and graphene, have showed great sensing performance; however, these sensors suffer from limited stretchability, signal drifting, and long-term instability due to the distance between the stretchable substrate and the functional materials.

To overcome these issues, liquid-state electronics using liquid metal have been introduced for various wearable applications. Of these materials, Galinstan — a eutectic metal alloy of gallium, indium, and tin — has great mechanical and electrical properties that can be employed in wearable applications. But today's liquid metal-based pressure sensors have low pressure sensitivity, limiting their applicability for health monitoring devices.

The researchers developed a 3D-print-ed, rigid microbump array-integrated, liquid metal-based soft pressure sensor. With the help of 3D printing, the integration of a rigid microbump array and the master mold for a liquid metal microchannel could be achieved simultaneously, reducing the complexity of the manufacturing process. Through the integration of the rigid microbump and the microchannel, the new pressure sensor has an extremely low detection limit and enhanced pressure sensitivity compared to previously reported liquid metal-based pressure sensors. The proposed sensor also has a negligible signal drift over 10,000 cycles of pressure, bending, and stretching and exhibited excellent stability when subjected to various environmental conditions.

These performance outcomes make it an excellent sensor for various health monitoring devices. First, the research team demonstrated a wearable wristband device that can continuously monitor one's pulse during exercise and be employed in a noninvasive, cuffless blood pressure monitoring system based on PTT calculations. Then, they introduced a wireless, wearable heel pressure monitoring system that integrates three 3D-BLiPS with a wireless communication module.

For more information, contact Professor Inkyu Park, KAlSTMicro/Nano Transducers Laboratory, at This email address is being protected from spambots. You need JavaScript enabled to view it. or visit here .