Have you attended an electronics or design tradeshow lately? Have you visited a big-box retailer or browsed an online electronics vendor? If so, you’ve probably seen many examples of wearable technology, including smart glasses, clothing, wristwear, footwear, neckwear, and headbands. Wearable computing is one of the hottest consumer electronics trends on the market, with global sales expected to grow from $14 billion in 2014 to over $70 billion in 2024, according to IDTechEx.

Packing five ESD diodes in a 0402-size flip-chip package, the SP1012 Series TVS Diode Array provides five times the diodes in a package less than a square millimeter in size, helping circuit designers economize on both PCB space and costs.
As consumers become increasingly dependent on wearables like smart glasses and fitness wristbands, circuit designers are tasked with incorporating advanced circuit protection technologies that safeguard the device as well as the user. Without proper protection, the device’s sensor circuits, battery charging interfaces, buttons, or data I/Os could be irreparably damaged by electrostatic discharge (ESD) that is often caused by close interaction with the user.

Circuit designers face many challenges in the design process stemming from the shrinking form factor of most wearables and the demand for improved device performance. The answers to the 15 questions asked here will help today’s circuit designers improve the performance, safety, and reliability of their wearable technology designs.

1. What is the benchmark for size versus ESD robustness?

In the past, large diode structures were needed to achieve excellent ESD performance (low clamping voltage). Since wafer fabrication processes and back-end assembly capabilities have steadily improved, it is now possible to have very robust ESD protection in small form factors. For example, the general-purpose 01005 transient voltage suppression (TVS) diode can withstand 30kV contact discharge (IEC 61000-4-2). It also has a dynamic resistance value of less than 1Ω.

2. How much area shrinkage can be achieved with the latest technology in ESD?

The most common discrete form factor for TVS diodes is the SOD882 package, which is equivalent to an outline of 1.0 × 0.6 mm. Moving to the 0201 form factor (0.6 × 0.3 mm) allows the designer to save approximately 70 percent in board area.

3. What are the downsides of a small form factor?

Per the advancements discussed in the first question, we are not seeing any downsides related to ESD performance. Discrete semiconductors with a small form factor can have the same level of ESD robustness (30kV) and low clamping performance (dynamic resistance <1Ω) as their larger counterparts (e.g., SOD323, SOD123). However, the small size of the component may present manufacturing challenges. At 0.4 × 0.2 mm, the 01005 package will require well-designed board treatments (solder pads, stencil thickness, etc.) to ensure that the component does not slide or “tombstone” during the reflow solder process.

4. If I have discrete TVS diodes on each of the pins of the integrated circuit (IC), will they occupy more of the board area and also cause the bill of material (BOM) to increase?

SP3022 Series Low Capacitance ESD Protection TVS Diode Arrays provide symmetrical protection for high-speed data lines when AC signals are present. They are also well suited for consumer electronics like fitness bands, smart watches, smartphones, tablets, and eReaders.
In general, most designs do not require board-level TVS diodes at each of the IC's pins. Instead, the designer should determine which pins have exposure to the outside of the application. Typical circuits include USB, audio, button/switch control, and other data buses. Since adding these discrete devices will take up board space, it’s important to concentrate on reducing their size. For some applications, there are some space-saving multi-channel arrays available.

5. When IC designers create products that employ lower working voltages, can the end application (e.g., smartphone or tablet) still be reliable?

ESD protection device manufacturers continue to work to develop products with ever-lower clamping voltages. They also work with board-level designers to ensure that proper circuit layout practices are followed to protect the reliability of the application. Coupling products with low dynamic resistance and proper board layout practices will ensure that applications with even the most sensitive IC will still perform reliably.

6. How do I choose between unidirectional or bidirectional TVS diodes?

Unidirectional diodes are typically used for DC circuits, including pushbuttons and switches. They are also designed for use in digital circuits where there is no negative voltage as part of the signal (e.g., USB, HDMI, etc.). Bidirectional diodes are used in AC circuits, which may include any signal with a negative component greater than -0.7V. Examples of these circuits include audio, analog video, legacy data ports (e.g., CAN, LIN, RS-485, etc.) and RF interfaces (e.g., cellular, Bluetooth, NFC, etc.).

7. To protect the IC’s pins with a TVS diode, what are the key considerations for trace?

Unlike lightning transients, ESD does not unleash a large amount of current for a long duration. Instead, it is important to move the ESD charge from the protected circuit to the ESD reference in a very short amount of time (<200 ns). The length of the trace (from the I/O line to the ESD component; from the ESD component to ground), not the width of the trace to the ground, is the overriding factor. This length should be kept as short as possible to limit parasitic inductance. Because of this, recent package developments include μDFN outlines that fit directly over the data lanes to eliminate the need for stub traces.

8. The length of the ground path influences the parasitic inductance, while the width influences the parasitic capacitance. In terms of form factor, how do I avoid ESD disruptive discharge?

The inductance will act as a choke for the ESD transient and degrade the protection performance. The parasitic capacitance will degrade high-speed signal performance. Designers should not only minimize the length/width of the stub trace, but also attempt to eliminate it. For the connection to the data or signal line, place the solder pad right on or adjacent to the trace, if possible. This can be done for discrete diodes as well as a number of arrays that are designed to be placed right over the data tracks. This underscores the need to consider the board-level ESD protection approach as early as possible in the design process.

9. What are the levels of Human Body Model (HBM) or Charged Device Model (CDM) for these TVS diodes? How do I determine the ideal HBM for a particular wearable technology?

SP5001, SP5002, and SP5003 Series TVS Diode Arrays provide both ESD protection and commonmode EMI filtering for systems that use high-speed differential serial interfaces. These AEC-Q101 qualified devices are ideal for consumer electronics like smartphones and tablet computers.
HBM and CDM are designations for the ESD robustness of the ICs that run the application, including the processor, memory, and ASIC. They are not designations for system-level ESD robustness or immunity. In general, applications like smartphones and PCs are characterized to the IEC 61000-4-2 standard. As a system-level specification, it allows the designer to determine whether the ESD device has the robustness and clamping capability needed to survive the systemlevel transient and protect the system. For board-level ESD devices, the designer can determine their robustness by reviewing the IEC 61000-4-2 rating (8kV contact, 12kV contact, 15kV contact, etc.). In addition, review the dynamic resistance value (1Ω, 0.5Ω, etc.) to determine the level of protection provided by the devices. For wearable technology, a high IEC rating and low dynamic resistance are especially important.

10. Based on the connection among capacitance, signal integrity, and ESD clamping voltage, does low capacitance affect performance?

Since significant advancements have been made regarding capacitance and ESD performance, there is no longer a tradeoff between these two characteristics. For example, new wafer fabrication processes allow the designer to create a protection device with 0.5pF of capacitance (or lower) and still have less than 1Ω of dynamic resistance. So, these low-capacitance diodes do not store any charge or impact high-speed signal integrity. The low dynamic resistance value ensures that they also have a low clamping voltage.

Some application designers consider polymeric devices and zener diodes as viable alternatives to the semiconductor ESD solutions we have discussed. However, it is important to recognize that all these options have very different characteristics, including dynamic resistance. For chipsets with robust on-chip protection (per HBM) or that were made on old processes (e.g., 130 nm), polymers and zener diodes provide sufficient protection. In contrast, modern ICs made on very dense topologies (e.g., 45 nm and 22 nm) are very sensitive to ESD pulses and require the lower dynamic resistance associated with semiconductor TVS diodes. It is vital that the circuit protection solution matches the needs of the IC that requires protection.

11. What is the most challenging aspect of protecting new applications?

The biggest challenge is convincing circuit designers that circuit protection is important from the beginning of the design process. Because circuit protection devices do not add perceived value to the customer’s product or enhance the capabilities of the application, they are typically ignored until the end of the process when it’s time for electromagnetic compatibility (EMC) testing. It’s very important for designers to understand that board-level ESD protection ensures that these innovative devices are able to deliver safe, reliable performance throughout their intended operating life.

12. Why is it so important to incorporate circuit protection in the design phase?

Circuit designers should consider ESD protection early in the design phase so that they can choose the ideal protection device and select the optimal layout/ location before their options become limited by other components, including transformers, common mode chokes, and passives.

13. Instead of implementing circuit protection early in the design process, is it possible to leave a few 0805 or 0603 package footprints at strategic places in the design?

If the designer doesn’t have enough time to do a complete ESD protection analysis during the early phase of the board layout, it should be possible to place sockets at each I/O or location where ESD is expected to enter the application. Due to the limited board space, consider choosing a 0402 or 0201 package. Because these footprints are quite common, parts can be readily sourced from several suppliers.

14. To eliminate electromagnetic interference (EMI), could I incorporate ESD protection at a later stage in the design process using ferrite beads, decoupling caps, or zener diodes?

Fortunately, there are multiple solutions available for protecting against ESD. To find the best solution for a specific application, it’s vital to consider the circuit’s characteristics, cost, and board implementation.

Consider the example of using ferrite beads. While a ferrite bead can be an effective ESD solution for low-speed circuits, it is not appropriate for high-speed circuits like USB 2.0, USB 3.0, HDMI, etc. For these circuits, the inductance that will remediate the ESD pulse will also cause signal integrity issues. It would be better to use a low-capacitance TVS diode or diode array (<< 1 pF) in parallel with the data line to shunt the ESD transient away from the IC. This solution is ideal since the low capacitance will not interfere with the data signal transfer, while the clamping action of the TVS diode/diode array protects the IC.

Solutions like zener diodes will clamp an ESD event. However, they are optimized for voltage regulation, not transient voltage suppression. Because of this, their dynamic resistance and clamping voltage are higher than that of TVS diodes and diode arrays. Another shortcoming is that they won’t be able to survive a high number of ESD hits.

15. In addition to choosing the correct suppression device, what is the significance of good board layout?


NASA Tech Briefs Magazine

This article first appeared in the January, 2015 issue of NASA Tech Briefs Magazine.

Read more articles from this issue here.

Read more articles from the archives here.

Board layout is very important since space is limited and several other components will compete for real estate. For optimal performance, the ESD suppressor should be located very close to the connector (ESD entry point). If there is a stub trace that runs from the protected line to the suppressor, it should be as short as possible. This will help to minimize inductive overshoot — a condition that can damage the IC by adding excessive voltage (stress). A long stub trace will add inductance to the ESD path to ground, which will cause inductive overshoot during an ESD event. The voltage that develops during inductive overshoot is added to the natural clamping response of the ESD protection component. Because of this, the IC that is to be protected experiences a much higher voltage than expected, which could lead to IC failure. By using the recommended board layout strategies, design engineers will realize enhanced efficiency and reliability in their ESD protection circuits.

This article was written by James Colby, Manager of Business & Technology Development, Semiconductor Business Unit, at Littelfuse, Inc., Chicago, IL. For more information, Click Here.