In 1977, the National Renewable Energy Laboratory (NREL, Golden, CO) started as the Solar Energy Research Institute (SERI), spurred by national concern during the 1973 oil embargo that caused long lines and high prices at gas stations. Three months after his 1977 inauguration, President Jimmy Carter announced his desire to reduce dependence on foreign oil and invest in alternative energy sources. He created SERI with the mission to launch a new American energy industry, and consolidated oversight of U.S. energy policy into the newly formed U.S. Department of Energy.
While early work at SERI concentrated on solar technologies, the focus quickly broadened to include many forms of advanced energy, including wind and biomass. In 1991, President George H.W. Bush elevated SERI to a member of DOE's national laboratory system and changed its name to the National Renewable Energy Laboratory.
Working with partners in industry and academia, NREL delivers the scientific foundation for new energy technologies. NREL advances the science and engineering of energy efficiency, sustainable transportation, and renewable power technologies, and provides the knowledge to integrate and optimize energy systems.
NREL supports 18 research programs that are organized into six directorates:
Bioenergy Science and Technology — This directorate advances technologies to produce bio-based fuels, products, and energy. Research covers exploratory research to pilot-scale processing. Capabilities include biochemical conversion, thermochemical conversion, algal biofuels, and techno-economic and lifecycle analyses.
Energy Systems Integration — Energy systems integration explores ways for energy systems to work more efficiently on their own, with each other, and with the electric grid. This directorate employs a holistic approach to developing, evaluating, and demonstrating innovative technologies and strategies to ensure that U.S. energy sources, demand-response programs, and delivery systems work seamlessly together.
Innovation, Partnering, and Outreach — This directorate accelerates the transfer of laboratory technologies to the marketplace.
Materials and Chemical Science and Technology — This directorate's capabilities span fundamental and applied R&D for renewable energy and energy efficiency. Key program areas include solar energy conversion for electricity and fuels, materials discovery and development for renewable energy technologies, hydrogen production and storage, and fuel cells.
Scientific Computing and Energy Analysis — This directorate is home to NREL's capabilities in high-performance computing, computational science, applied mathematics, visualization and data, analysis of energy systems, technologies, policies, resources, and markets.
Mechanical and Thermal Engineering Sciences — This directorate conducts research and development to enable technology innovations in NREL's advanced manufacturing, buildings, concentrating solar power, geothermal, transportation, water, and wind research programs.
Even before SERI, research to harness power from the Sun had been going on for hundreds of years. In the past 41 years, NREL has made significant strides in solar technology including these six major breakthroughs:
High-efficiency cells. Silicon solar cells were fairly new when NASA sent the Vanguard I satellite into orbit in 1958. But the cell used for that first solar-powered satellite could only capture and use about 9% of the sunlight that reached it, so the technology was too expensive and inefficient to spark much interest on Earth. In 1984, NREL found that gallium indium phosphide (GaInP) — promising for use in semiconductors but difficult to alloy with other materials — was compatible with gallium arsenide (GaAs). A layer of each was combined to create the “tandem-junction” solar cell.
Thin films. NREL scientists have been working with thin-film photovoltaics (PV) — cells that use much less active material than silicon wafer cells — from the very start of SERI. Researchers have studied various materials and devices, and the greatest commercial success to date has been the cadmium telluride (CdTe) module. NREL has contributed to its success with depositional technology for these materials, and in revealing the fundamental physics underlying the PV process at work at the microscopic and atomic levels.
Reliability science. PV technology may be a scientific marvel, but if solar devices — from cells to modules to systems — could not withstand the rigors of normal operations and extreme weather, they would have remained a laboratory novelty rather than blossoming into today's multi-billion-dollar industry. Understanding the need for robust technology, NREL developed indoor and outdoor testing facilities and procedures that put PV technologies through the paces, ensuring they have the necessary durability to operate reliably for 30 years or more.
Cell and device measurements. Another early NREL focus was to develop the techniques, equipment, and facilities to measure the properties of the PV devices that they and others were creating. They also needed to characterize the devices, determining their efficiency and performance within very strict tolerances. NREL measures, characterizes, and certifies many thousand samples each year.
Third-generation solar cells. Basic NREL research programs that started receiving funding in 1979 led to the creation of what's now known as third-generation solar cells — the first two generations being semiconductors and thin films, respectively. The latest generation has the potential to overcome the theoretical power conversion efficiency limit of 33% that applies to a single semiconductor solar cell.
Perovskites. NREL has only been involved in this emerging solar technology for about five years, but NREL scientists have become world-renowned for perovskite research. Efficiencies continue to climb, from a starting point of less than 4% up to 22% — and perhaps more importantly, NREL is making progress in understanding the causes of perovskite stability issues and mitigating their impact. For example, industry will not accept a device with an excellent initial efficiency, only to see it degrade under humid conditions to drastically lower values. NREL is discovering new perovskite materials and device structures to overcome this potential weakness.
Ethanol produced from non-food plant sources, called “cellulosic ethanol,” can potentially replace 30% of our nation's petroleum consumption. But can it do so at competitive prices? From 2006 to 2012, NREL worked with private industry to create models, perform biomass-to-fuels test runs, and analyze market data in an attempt to answer that question. The result: the team proved that cellulosic ethanol could be produced for $2.15 per gallon, a price that was cost-competitive with other transportation fuels. As a follow-up to its success with cellulosic ethanol, NREL has turned its attention to the next generation of biofuels — “drop-in” biofuels — that function just like crude oil or any of today's major petroleum fuels, allowing them to be easily incorporated into the existing fuel infrastructure.
NREL solar researchers found a winning combination of materials to create a high-efficiency solar cell: a bottom layer of gallium arsenide (GaAs) and a top layer of gallium indium phosphide (GaInP) — the first practical multi-junction III-V solar cell. This structure led to the commercial development of the GaInP/GaAs/Ge three-junction cell, which has powered satellites and the Mars rovers. NREL then developed a four-junction cell with 45.7% solar conversion efficiency.
Regulating battery and power electronic system operating temperatures is key to optimizing the performance, lifespan, safety, and affordability of electric-drive vehicles. NREL innovations — including isothermal battery calorimeters, a battery internal short circuit (ISC) device, and a high-temperature, wide-bandgap, underhood inverter — troubleshoot battery and drivetrain thermal performance issues to make next-generation electric-drive vehicles more competitive with conventional vehicles.
NREL's support of the DOE's Clean Cities program provides technical assistance to early adopters of alternative fuels and advanced vehicle technologies and access to sophisticated tools, vital data collection, and fleet analysis. With NREL's assistance, Clean Cities’ network of nearly 100 local coalitions has saved more than 8.5 billion gallons of petroleum since 1993.
NREL, Sandia National Laboratories, and Powertech Labs have developed and built the Hydrogen Station Equipment Performance (HyStEP) device to measure the performance of hydrogen fueling station dispensers, allowing the stations to open to the public more quickly. The mobile device is a surrogate for the current time-consuming practice of requiring each individual fuel cell electric vehicle manufacturer to evaluate a dispenser before allowing its cars to fill there. HyStEP will accelerate the development of hydrogen fueling station networks in California and across the country.
While electric vehicles (EVs) promise to curb greenhouse gas emissions and slash America's need for imported oil, the design of high-performance, cost-effective, and safe batteries has proven challenging. NREL is leading teams of automakers, battery developers, and other research institutions in developing the sophisticated software tools needed to create batteries for next-generation EVs. NREL modeling tools will improve and accelerate battery design and production, boost EV performance and consumer appeal, and ultimately diminish energy use and emissions.
Lighting systems based on solid-state light-emitting diodes (LEDs) enable enormous energy savings; however, fundamental materials challenges that favor blue emitters have led to a restricted palette of efficient white-lighting system designs. Inspired by basic semiconductor research and solar cell development activities, NREL has identified new emitter material approaches for significantly improving the performance of red and orange LEDs. These new LEDs would enable highly efficient, cost-effective white-lighting systems with enhanced color quality and control.
With the flip of a switch, a tiny flow of electricity can change the tint of windows. Pioneered by NREL and developed over three decades, electrochromic windows provide an automatic, adjustable window tint that allows users to control the amount of sunlight entering a building, keeping occupants warmer in the winter and cooler in the summer. This window technology, which stemmed from NREL's research, spurred a new industry for U.S. manufacturing, and is installed in buildings across the country.
NREL gives U.S. entrepreneurs a competitive edge in the global energy race by bridging the gap from concept to market. NREL accelerates the commercialization of energy technologies through licensing and partnerships with industry. There are 749 active technology partnerships with 503 unique active partners — 57% of these partnerships are with large and small businesses. More than 800 patented or patent-pending technologies are available for licensing.