Who

The process can produce, in the operating room, bioresorbable metal implants such as screws made of magnesium alloys that are used for bone fractures. It also can produce components for fuel cells or components for battery systems.

What

The 3D printer melts metal powder using high-performance LED light sources and then processes it into components in additive manufacturing. (© TU Graz)

The Selective LED-based Melting (SLEDM) process uses LEDs instead of laser sources for additive manufacturing of metal parts. SLEDM melts metal powder using high-power LED light sources. It is similar to selective laser melting (SLM) and electron beam melting (EBM) in which metal powder is melted by means of a laser or electron beam and built up into a component layer by layer; however, SLEDM eliminates the time-consuming production of large-volume metal components and manual post-processing. The LEDs are equipped with a complex lens system by which the diameter of the LED focus can be easily changed during the melting process, enabling melting of larger volumes per unit of time without having to dispense with filigree internal structures and reducing the production time by a factor of 20 on average. The time-consuming, usually manual reworking that is necessary with current methods - such as smoothing rough surfaces and removing supporting structures - is no longer necessary and saves valuable time.

Where

Graz University of Technology, Graz, Austria

Why

The implants dissolve in the body after the fracture site has grown together, eliminating a second operation that is often very stressful for patients. Also, with SLEDM, the production of implants would be possible directly in the operating theater because LED light is naturally less dangerous for the operation than powerful laser sources.

When

The inventors have applied for a patent and a marketable prototype is being created.

Contact Franz Haas, head of the Institute of Production Engineering, at This email address is being protected from spambots. You need JavaScript enabled to view it.; +43 316 873-7170.


Tech Briefs Magazine

This article first appeared in the July, 2020 issue of Tech Briefs Magazine.

Read more articles from this issue here.

Read more articles from the archives here.