Vision-Based Additive Manufacturing

Inkbit Corp., Medford, MA, announced a vision-based, artificial intelligence, material jetting additive manufacturing platform that uses a proprietary 3D scanning system to generate a topographical map of each layer after deposition. These data are used to train a machine learning algorithm that enables the printer to learn the properties of each material and anticipate its behavior. It is fitted with three build materials and can be expanded to eight.

For Free Info Visit Here 


Vector Network Analyzer

The VectorStar™ ME7838G broadband vector network analyzer from Anritsu, Morgan Hill, CA, enables measurements from 70 kHz to 220 GHz in a single sweep without the need to reconstruct the wafer probe station from 110 GHz to higher waveguide bands. The system eliminates the need for waveguide concatenation and reduces the number of system reconfigurations.

For Free Info Visit Here 


Particulate Sensor

Sorex Sensors, Cambridge, UK, introduced a particulate sensor and development kit for monitoring deposition rates and amounts. The sensor is based on film bulk acoustic resonator technology and offers mass sensitivity down to femtograms. The discrete, non-specific sensor is capable of detecting minute particles in the sub-PM2.5 range.

For Free Info Visit Here 


Radar Sensor

Fujitsu Components America, Sunnyvale, CA, offers the FWM7RAZ01 3-channel, 24-GHz Doppler radar sensor that supports IF (I/Q) output signals from 1 Hz to 1 MHz, enabling it to wirelessly detect movement speeds from 6-mm per second to 6-km per second within a 30-meter range. The sensor includes a 24-GHz transceiver, TX and RX array antennas, IF amplifier, and an LDO voltage regulator.

For Free Info Visit Here 


Power Supplies

New Yorker Electronics, Northvale, NJ, offers RDI 20W modular AC-DC compact PCB-mount power supplies that support up to 300VAC input, delivering up to 20W continuous output power. Features include an RF shielded case that enables close proximity placement to RF circuits and antennas.

For Free Info Visit Here 


Additive Manufacturing Powders

6K, North Andover, MA, released additive manufacturing powders derived from sustainable sources through a process that converts certified chemistry machined millings, turnings, and other recycled feedstock sources into metal powder. The powders provide zero porosity and high flowability.

For Free Info Visit Here 


High-Precision Resistors

KOA Speer Electronics (Bradford, PA) has introduced the RS73F (25ppm/°C) and RS73G (50ppm/°C) metal glaze thick film chip resistors. The 0603 case size resistors are offered in ±0.1%, 0.25%, and 0.5% tolerances, with a T.C.R. as low as ±25ppm/°C and a resistance range from 100Ω to 1MΩ. The AEC-Q200 qualified resistors support high-precision applications, including automotive, industrial, and measuring equipment for engine control, power supplies, and body control.

For Free Info Visit Here 


LED Indicators

Visual Communications Co., San Diego, CA, offers the CD Series LED indicators for status indication, automation, controls, and instruments. Features include an IP67 rating against moisture and dust, a protruded 3-mm LED and nickel-plated bezel, and a lock washer, hex nut, and gasket seal for protection from shock and vibration. An optional resistor for 5V-28VDC and 120VC is available.

For Free Info Visit Here 

Gas Sensor

Emerson, Shakopee, MN, introduced the Rosemount 628 universal gas sensor to measure carbon monoxide and oxygen depletion. It can be deployed using a WirelessHART® network in areas considered impractical for conventional wired infrastructure. The gas monitor has hot-swappable main components including the power module and the toxic gas sensor. The sensor’s calibration information is stored within the sensor.

For Free Info Click Here 


Hardness Tester

Mitutoyo America Corp., Aurora, IL, released the HR-600 hardness tester for Rockwell hardness testing and for Light Force Brinell testing. Features include a head that moves at 10 mm/s within a 210-mm range, a table for mounting workpieces and head with vertical mobility, and maximum load limit of 100 kg.

For Free Info Click Here 


MEMS-Based Pressure Sensor

Würth Elektronik, Waldenburg, Germany, introduced the WSEN-PADS MEMS-based absolute pressure sensor for pressure between 26 and 126 kPa. Output data rate can be selected between 1 and 200 Hz. The sensor contains an ASIC and a temperature sensor so output values are already calibrated. Measured data can be read out via a standard I2C interface.

For Free Info Click Here 


Electrolytic Capacitors

The 381LL series of snap-in aluminum electrolytic capacitors from Cornell Dubilier Electronics, Liberty, SC, offers stability in capacitance and DC leakage current over time on test. Capacitance values range from 740μF to 100,000μF at working voltages of 16 to 250 WVDC with ripple current ratings up to 10 Amps @ 105 °C. T

For Free Info Click Here 


Pressure Sensors

Bourns, Riverside, CA, announced BPS310/320/330/340 Series MEMS pressure sensors that work with pressure ranges from 5 to 500 psi. The BPS310 provides high sensitivity/accuracy for ultra-low pressures. For gauge and pressure measurement, the BPS320 series is offered in a surface mount package. BPS330 are through-hole pressure sensors with an aluminum port and operating range to 125 °C. BPS340 is offered in a surface mount package and supports pressure ranges to 500 psi.

For Free Info Click Here