A micromachining-based fabrication process has been proposed for low-volume production of copies of a mesoscale vibratory gyroscope. The process would include steps of photolithography, metallization, deep reactive-ion etching (RIE), Au/Au thermal-compression bonding, and anodic bonding. In the present state of the art, these process steps are well established and the process as a whole would be considered reproducible.

The basic designs and principles of operation of micromachined vibratory gyroscopes were discussed in several prior NASA Tech Briefs articles. For the purpose of the present discussion, the relevant micromachined components of the mesoscale vibratory gyroscope to be fabricated would be a baseplate; a resonator to be mounted on the baseplate; and a post to be affixed to (and thereby become part of) the resonator.

Separately Micromachined Components of a vibratory gyroscope are joined in thermal-compression and anodic-bonding steps.
Although the proposed fabrication process would be simple in comparison with some other micromachining processes, it would nevertheless consist of numerous steps and therefore is only summarized here. The baseplate, resonator, and post would be fabricated separately from silicon wafers. The fabrication of the baseplate would include photolithography and etching steps to form pillars to support the resonator; photolithography, metal-evaporation, and liftoff steps to form metal bonding pads and electrical conductors; and photolithography and deep-RIE steps to form through-the-thickness holes. The fabrication of the resonator would include similar but fewer steps (no pillar-formation steps).

The figure depicts the last joining steps. The resonator would be joined to the baseplate by thermal-compression bonding of surface gold layers on their mating metal bonding pads, at a temperature of 350 °C. Top and bottom parts of the post would be joined to the upper and lower surfaces, respectively, of the resonator by anodic bonding at a potential of 4.25±0.25 kV and temperature of Å400 °C.

This work was done by Kirill Shcheglov of Caltech for NASA's Jet Propulsion Laboratory. For further information, access the Technical Support Package (TSP) free on-line at www.nasatech.com/tsp under the Manufacturing category.

In accordance with Public Law 96-517, the contractor has elected to retain title to this invention. Inquiries concerning rights for its commercial use should be addressed to

Intellectual Assets Office


Mail Stop 202-233

4800 Oak Grove Drive

Pasadena, CA 91109

(818) 354-2240

E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

Refer to NPO-30288, volume and number of this NASA Tech Briefs issue, and the page number.

This Brief includes a Technical Support Package (TSP).
Micromachining of a Mesoscale Vibratory Gyroscope

(reference NPO-30288) is currently available for download from the TSP library.

Don't have an account? Sign up here.

NASA Tech Briefs Magazine

This article first appeared in the December, 2002 issue of NASA Tech Briefs Magazine.

Read more articles from the archives here.