In a modification of the basic configuration of InAs quantum-dot semiconductor lasers on (001)lnP substrate, a thin layer (typically 1 to 2 monolayer thick) of GaAs is incorporated into the active region. This modification enhances laser performance: In particular, whereas it has been necessary to cool the unmodified devices to temperatures of about 80 K in order to obtain lasing at long wavelengths, the modified devices can lase at wavelengths of about 1.7 μm or more near room temperature.
InAs quantum dots self-assemble, as a consequence of the lattice mismatch, during epitaxial deposition of InAs on ln0.53Ga0.47As/lnP. In the unmodified devices, the quantum dots as thus formed are typically nonuniform in size. Strain energy relaxation in very large quantum dots can lead to poor laser performance, especially at wavelengths near 2 μm, for which large quantum dots are needed. In the modified devices, the thin layers of GaAs added to the active regions constitute potential-energy barriers that electrons can only penetrate by quantum tunneling and thus reduce the hot carrier effects. Also, the insertion of thin GaAs layer is shown to reduce the degree of nonuniformity of sizes of the quantum dots.
In the fabrication of a batch of modified InAs quantum-dot lasers, the thin additional layer of GaAs is deposited as an interfacial layer in an InGaAs quantum well on (001) InP substrate. The device as described thus far is sandwiched between InGaAsPy waveguide layers, then further sandwiched between InP cladding layers, then further sandwiched between heavily Zn-doped (p-type) InGaAs contact layer.
Once a wafer comprising the layers described above has been formed, the wafer is processed into laser diodes by standard fabrication techniques. Results of preliminary tests of experimental modified quantum-dot lasers have been interpreted as signifying that these devices lase at wavelengths from 1.60 to about 1.74 μm. The devices were found to be capable of continuous-wave operation at temperatures up to 260 K and pulse operation (duration 1 ms, repetition rate 1 kHz) at temperatures up to 280 K. It is anticipated that future such devices containing multiple stacks of quantum dots (instead of single stacks in these experimental devices) would be able to lase, at a wavelength of 2 μm. In addition, the multiple-stack devices are expected to perform better at room temperature.
This work was done by Yueming Qiu, Rebecca Chacon, David Uhl, and Rui Yang of Caltech for NASA’s Jet Propulsion Laboratory. For further information, access the Technical Support Package (TSP) free on-line at www.techbriefs.com/tsp under the Physical Sciences category. NPO-40243
This Brief includes a Technical Support Package (TSP).
Adding GaAs Monolayers to InAs Quantum-Dot Lasers on (001) InP
(reference NPO-40243) is currently available for download from the TSP library.
Don't have an account? Sign up here.