Three-stage monolithic millimeter-wave integrated-circuit (MMIC) amplifiers capable of providing useful amounts of gain over the frequency range from 120 to 180 GHz have been developed as prototype low-noise amplifiers (LNAs) to be incorporated into instruments for sensing cosmic microwave background radiation. There are also potential uses for such LNAs in electronic test equipment, passive millimeter-wave imaging systems, radar receivers, communication receivers, and systems for detecting hidden weapons. The main advantage afforded by these MMIC LNAs, relative to prior MMIC LNAs, is that their coverage of the 120-to-180-GHz frequency band makes them suitable for reuse in a wider variety of applications without need to redesign them. Each of these MMIC amplifiers includes InP transistors and coplanar waveguide circuitry on a 50-μm-thick chip (see Figure 1). Coplanar waveguide transmission lines are used for both applying DC bias and matching of input and output impedances of each transistor stage. Via holes are incorporated between top and bottom ground planes to suppress propagation of electromagnetic modes in the substrate.
On the basis of computational simulations, each of these amplifiers was expected to operate with a small-signal gain of 14 dB and a noise figure of 4.3 dB. At the time of writing this article, measurements of noise figures had not been reported, but on-chip measurements had shown gains approaching their simulated values (see Figure 2).
This work was done by David Pukala, Lorene Samoska, and Alejandro Peralta of Caltech and Brian Bayuk, Ron Grundbacher, Patricia Oliver, Abdullah Cavus, and Po-Hsin Liu of Northrop Grumman Corporation for NASA’s Jet Propulsion Laboratory. NPO-42783
This Brief includes a Technical Support Package (TSP).
Low-Noise MMIC Amplifiers for 120 to 180 GHz
(reference NPO-42783) is currently available for download from the TSP library.
Don't have an account? Sign up here.