Now in its 11th year of operation, Mikro Systems has fully developed its patented TOMO lithographic molding technology and, according to Appleby, Mikro’s president and CEO, is applying the lessons and techniques the company derived from its NASA work to manufacturing advanced products for multiple markets.

The TOMO process starts with a 3D computer model of the part to be created. The model is sliced into thin layers ranging from 25–200 microns in thickness. Using photomasks created from the layers, a chemical machining process is applied to etch each layer in thin metal foils. The layers are then bound together using stack lamination and epoxy to create a master pattern. The pattern serves as the basis for a mold then used to cast the products. With this process, says Appleby, Mikro can cast ceramics, powdered metals, polymers, and composites with high precision and at low cost.

One of the company’s main markets developed from its NASA collimator work. Just like the RHESSI instrument, X-ray-based medical imaging machines require collimators, also known as antiscatter grids. These grids, typically made of tungsten or molybdenum, sit between the X-ray source and the detector. As the X-rays pass through the body, some are scattered; the grid absorbs the scattered radiation while allowing the unscattered X-rays to pass through, ensuring a clean image for doctors to study.

Using the TOMO process, Mikro now creates unique collimators for computed tomography (CT) machines used to image injuries and other conditions in regions like the brain, heart, and lungs. These collimators are two-dimensional grids—as opposed to the standard onedimensional collimator—a device that was not possible to create prior to the innovation of the TOMO process, Appleby says. The 2D grid provides significant benefits including improved scatter rejection (and thus better imaging) and enhanced strength. These features are key to newer CT machines that move the detector-carrying gantry around patients at higher speeds and produce more comprehensive imagery. The advanced qualities all come at a reduced cost; the TOMO process uses powdered tungsten instead of tungsten foil to create the grids, lowering material expenses from between $300–$500 a pound to around $20 a pound.

In addition to the medical imaging applications, Mikro’s collimators are currently used in a high-resolution scanner for airport security screening, and Mikro is also applying the TOMO process to the production of blades for gas turbine engines used for aircraft propulsion and energy generation. The hotter a turbine engine runs, the more efficiently it operates, so effective methods for managing the engine’s heat are essential to boosting efficiency. The TOMO process allows Mikro to cast blades containing finer and more complex cooling passages than previously achievable. At the same time, TOMO reduces the cost of the tooling process by one third and shortens the time involved from between 30–40 weeks down to 4–6 weeks. Mikro is currently working with major firms like Siemens Energy to advance the technology for energygenerating industrial gas turbines.

Launched with three employees, Mikro now has 40, including 15 recent hires to support the company’s medical imaging efforts. The company’s turbine work is growing even faster, and all of this success can be traced back to Mikro’s NASA collaboration, says Appleby.

“We are always proud to accomplish something on the cutting edge,” he says. “This is the privilege we have in working with NASA and other Government agencies.”

Dennis says that Mikro’s new etched grids, smaller but more complex than those used for RHESSI, are essential for enabling the Solar Telescope for Imaging X-rays (STIX) to be flown on the Solar Orbiter, a joint NASA/European Space Agency mission that will venture within the orbit of the planet Mercury to obtain a close-up look at the Sun. It seems a NASA partnership will once again play a role in drawing back the veil on the Sun’s mysteries.