The challenges of energy storage — which require the capacity to bank an intermittent and seasonally variable supply of solar energy — have kept the technology from being economically competitive. Researchers have used low-cost materials to create rechargeable batteries that will make energy storage more affordable. These materials could also provide a safer and more environmentally friendly alternative to lithium-ion batteries that currently dominate the market but are slow to charge and have a knack for catching fire.

The group previously demonstrated the potential of zinc-anode batteries. Now, they have employed a different approach for incorporating aluminum, resulting in rechargeable batteries that offer up to 10,000 error-free cycles. Only two elements are used for the anode and the cathode — aluminum and carbon — both of which are inexpensive and environmentally friendly with very long cycle life.

Among the advantages of aluminum is that it is abundant in the Earth’s crust, it is trivalent and light, and it therefore has a high capacity to store more energy than many other metals. However, aluminum can be tricky to integrate into a battery’s electrodes. It reacts chemically with the glass fiber separator, which physically divides the anode and the cathode, causing the battery to short circuit and fail.

The researchers’ solution was to design a substrate of interwoven carbon fibers that forms an even stronger chemical bond with aluminum. When the battery is charged, the aluminum is deposited into the carbon structure via covalent bonding, i.e., the sharing of electron pairs between aluminum and carbon atoms. While electrodes in conventional rechargeable batteries are only two dimensional, this technique uses a three-dimensional — or nonplanar — architecture and creates a deeper, more consistent layering of aluminum that can be finely controlled.

The aluminum-anode batteries can be reversibly charged and discharged one or more orders of magnitude more times than other aluminum rechargeable batteries under practical conditions. The substrates provide a large thermo-dynamic driving force that promotes nucleation. Runaway — unsafe growth of the metal electrode — is prevented by forces such as surface tension that can be massive at small scales.

For more information, contact Jeff Tyson at This email address is being protected from spambots. You need JavaScript enabled to view it.; 607-793-5769.


Battery Technology Magazine

This article first appeared in the September, 2021 issue of Battery Technology Magazine.

Read more articles from this issue here.

Read more articles from the archives here.