Silicon Designs (Issaquah, WA) has introduced the Model 2210-005, a ±5g, low-noise, single-axis accelerometer module that incorporates MEMS capacitive sensing elements. The sensing elements are packaged within a lightweight anodized epoxy aluminum housing, occupying a footprint of one square inch. The accelerometers feature a four-wire connection and internal voltage regulator, as well as high-drive, low-impedance buffering to support low-frequency acceleration measurement requirements from 0 to 400 Hz.

The accelerometer produces two analog voltage outputs that vary with acceleration. Users can employ either single-ended or differential output. The sensitive axis is perpendicular to the bottom of the package, with positive acceleration defined as a force pushing on the bottom of the package. The signal outputs are fully differential about a common mode voltage of about 2.5V. The output scale factor is independent from the supply voltage of 9 to 32V.

For Free Info Click Here 


Motion Control & Automation Technology Magazine

This article first appeared in the June, 2012 issue of Motion Control & Automation Technology Magazine.

Read more articles from this issue here.

Read more articles from the archives here.