A combination of pulsed-source interferometry and acoustic diffraction has been proposed for use in imaging subsurface microscopic defects and other features in such diverse objects as integrated-circuit chips, specimens of materials, and mechanical parts. A specimen to be inspected by this technique would be mounted with its bottom side in contact with an acoustic transducer driven by a continuous-wave acoustic signal at a suitable frequency, which could be as low as a megahertz or as high as a few hundred gigahertz (see figure). The top side of the specimen would be coupled to an object that would have a flat (when not vibrating) top surface and that would serve as the acoustical analog of an optical medium (in effect, an acoustical "optic").

Microfeatures within the specimen would diffract the acoustic wave. The diffracted wave would propagate through the acoustical "optic," forming a vibration pattern on the top surface. The vibration pattern would be measured twice by use of a pulsed-source optical interferometer; the first measurement would be taken in phase, the second 90° out of phase with the acoustic signal at its source. The amplitude and phase of the vibration pattern, and thus of the acoustic field, would be computed from the two measurements. Then by use of a diffraction formula, the acoustic pattern would be computationally propagated back into the specimen to obtain an acoustic image of the internal microfeatures.

The pulsed-source interferometer has already been demonstrated, in a different application, to afford an amplitude resolution as small as 1 nm. With refinements in design and operation, it should be possible to resolve amplitudes an order of magnitude smaller. If, in addition, the acoustic frequency were at least 30 GHz, then it should be possible to image features as small as 30 nm. The ability to image at such high resolution would be a significant contribution to the art of nondestructive microscopy. Of course, lower acoustic frequencies could be used to image larger features in applications in which the highest resolution is not needed.

This work was done by Kirill Shcheglov, Roman Gutierrez, and Tony K. Tang of Caltech for NASA's Jet Propulsion Laboratory.


This Brief includes a Technical Support Package (TSP).
Pulsed-Source Injterferometry in Acoustic Imaging

(reference NPO20478) is currently available for download from the TSP library.

Don't have an account? Sign up here.

Photonics Tech Briefs Magazine

This article first appeared in the March, 2003 issue of Photonics Tech Briefs Magazine.

Read more articles from the archives here.