An acquisition, tracking, and pointing (ATP) system, under development at the time of reporting the information for this article, is intended to enable a terminal in a free-space optical communication system to continue to aim its transmitting laser beam toward a receiver at a remote terminal when the laser beacon signal from the remote terminal temporarily fades or drops out of sight altogether. Such fades and dropouts can be caused by adverse atmospheric conditions (e.g., rain or clouds). They can also occur when intervening objects block the line of sight between terminals as a result of motions of those objects or of either or both terminals.

A typical prior ATP system in an optical-communication terminal, shown in the upper part of the figure, includes a retroreflector, a beam splitter, and a charge-coupled-device (CCD) image detector mounted on the same platform that holds the transmitting laser. With help of the beam splitter and the retroreflector, the direction of aim of the laser beam, relative to the direction to the beacon, is measured in terms of the relative positions of the beacon and a sample of the laser beam on the CCD. Hence, the CCD output constitutes an indication of the instantaneous aim of the transmitted laser beam and can be used as a feedback control signal for a steering mirror to point the transmitted laser beam toward the beacon. The CCD output is sampled at a high update rate to provide feedback compensation for any motion (including microscopic vibration) of the platform. If the intensity of the beacon signal reaching the CCD is reduced, the beam-pointing performance is reduced. If the reduction is severe or prolonged, the transmitted laser beam may cease to track the beacon, with consequent loss of the communication link.

The Inertial Sensor measures motions of the platform, thereby providing an approximate measure of the direction of aim when the beacon signal is attenuated or not visible.

The developmental ATP system, shown in the lower part of the figure, includes all the components of the prior system, plus an inertial sensor, which measures the vibrations and other motions of the platform. The feedback control subsystem utilizes the inertial-sensor output, in addition to the CCD output, as a source of feedback for control of the steering mirror: The inertial signal serves as an approximate indication of the instantaneous orientation of the dimmed (or missing) beacon, making it possible to continue to compensate for vibrations and other motions when the system is partially or totally blind to the beacon.

The time during which compensation can be maintained is limited by the accumulation of integration error since the last observation of the beacon at adequate intensity. Typical atmospheric fades last about 1 ms. It has been estimated that compensation could be maintained for times ranging from tens of milliseconds to tens of seconds, depending on the amount of pointing error that can be tolerated.

This work was done by Gerardo Ortiz and Shinhak Lee of Caltech for NASA's Jet Propulsion Laboratory.


This Brief includes a Technical Support Package (TSP).
Atmospheric-Fade-Tolerant Tracking and Pointing in Wireless Optical Communication

(reference NPO40061) is currently available for download from the TSP library.

Don't have an account? Sign up here.

Photonics Tech Briefs Magazine

This article first appeared in the October, 2003 issue of Photonics Tech Briefs Magazine.

Read more articles from the archives here.